The FLIR VS290-21 Thermal VideoScope Kit 19mm Camera Probeis an industrial thermal and visual videoscope system designed to help professionals quickly and safely find hidden dangers in difficult-to-access locations. Featuring a 160 x 120 true thermal imager, the VS290-21 gives users the power to see and measure invisible hot spots before catastrophic equipment failures can occur. Early detection improves safety and reliability, and helps lower maintenance and replacement costs.

Inspect Hard-to-Reach Places    160 x 120, 44" Thermal Imaging Probe    3.5" Display    Save & Share Images/Video    Rechargeable Battery, 5 Hours Runtime

• Quickly find hidden faults without entering unsafe or hard-to-reach spaces
• Troubleshoot problems from a safe distance with the 160 × 120 true thermal imager
• Easily maneuver the narrow field-replaceable camera probe to inspect underground electrical distribution faults, inside large gearboxes, motors, attics, crawl spaces, and other cramped locations

• Improve workflow and communicate potential issues before they become major problems
• View findings clearly on the large 3.5" color display and use color alarms (isotherms) to quickly identify problems
• Save images and videos using the included SD memory card then upload to a PC via USB-C cable
• Quickly create reports using FLIR Thermal Studio Suite software and share findings with team members to prioritize repairs

• Use the VS290-21 system in the most demanding environments
• IP67 camera tips and IP54 base unit and probe provide a high level of protection against dust and water
• Easily replace or interchange the camera probe while in the field

Related Questions and Answers

Q: 1. What max size laptop will fit in this bag?

A: This bag has section for a tablet but you could probably fit a 13" laptop.

Q: 2. No hood available from Nikon, is one not needed? How bad is glare and reduced contrast when key light is in front/side of camera? Note front glass bulbs out. Nano coating can only do so much, no? Any success in using flags in lieu of a hood? Or is lack of a hood not a concern with this lens?

A: There is a good reason why there are no hoods for very wide lenses; to wit, a hood that actually protects the lens from flare is also visible in the frame.My rule of thumb to make sure no light is flaring or causing ghosts on my lens is this: From moderately wide to tele lens length, I use lens hoods, or matte boxes or adjustable sunshades on the camera to block the spurious light. However, on very wide lenses, the flare has to be flagged at the light source that is causing the problem. Even outside and it is the sun hitting the lens, use a grip flag on a stand to stop the direct light of the sun. Do not have such equipment? Then have a friend hold any rectangular object so the the flare from the sun is blocked. How to know it is working? Make sure the shadow of the flag covers the front element of the lens. Nikkor lenses are among the finest in the world. The lens coatings on this lens are no less than that. You can be sure that for all but the most direct specular light rays, light hitting this lens will be flare and ghost free.

Q: 3. When not being used in either tilt / shift mode (and settings for both zeroed out ), I assume that this lens can essentially be used as a prime manual-focus rectilinear 19mm F4.0 lens with fantastic optics, correct?

A: Absolutely outstanding results

Q: 4. Can the aperture be set with the camera like the other Nikon tilt-shift lenses?

A: Yes, it can, just use A mode on the camera.

Q: 5. Will the Tamrac Stratus 21 hold a Nikon D7500 with a Sigma 150-600mm lens attached and leave room for other small lenses?

A: Yes you can hold your D7500 and a Sigma 150-600mm in this bag. You would just need to rearrange the dividers.

Q: 6. Will this bag hold the following: Nikon D7200 with battery grip and 18-140mm attached; Nikon 70-300mm, Speedlite SB-500, and a Sigma 150-600mm, detached and laying down? (The Sigma is 4 3/4 x 11 ).

A: I have it and I don't think all that equipment will fit. Try a bigger size.

Q: 7. What filter holder kit can be used with this lens?

A: Unfortunately, at this time, we have no filters or filter holders that are compatible for use with the Nikon PC NIKKOR 19mm f/4E ED lens.

Q: 8. when this lens will be available to buy?

A: Unfortunately, we do not have an estimated arrival date for the Nikon PC NIKKOR 19mm f/4E ED Tilt-Shift Lens at this time. If you havent already, you could choose the Request Stock Alert option on the lenss page on our site. We would then send you an email when the lens came into stock. That being said, we are accepting preorders on the lens at this time.

Q: 9. Other than the ones shown in photos, How many dividers come with this bag?

A: There are 9 dividers in total for the Tamrac Stratus 21 Shoulder Camera Bag.

Q: 10. Are there any limitations in using the lens on the Nikon d850?

A: I asked Nikon technical support the same question. Their reply: there are no horizontal or vertical shift limitations when using the Nikkor 19mm PCE lens on a D850.