For builders looking for speed and agile printing productivity, the Creality K1 Speedy 3D Printer | Fast & Reliable Printingfeatures a solid die-cast aluminum alloy frame that promotes swiftness without compromising quality.

Providing you with a build area of 8.7 x 8.7 x 9.8", you have plenty of room for your creations. A single extruder boasts a high temperature of 572°F, suitable for handling multiple 1.75mm filaments including ABS, PLA, PETG, TPU, and more. Rail and extruder design enables the K1 to achieve printing speeds up to 600 mm/s, while retaining a 0.1 to 0.35mm resolution. Aluminum alloy heat bed spreads heat uniformly and quickly and can handle up to 212°F while also using hands-free auto-leveling to ensure your models are printed evenly. Sticky and heat-resistant build plate assists with removing your finished models. The K1 can print via USB drive or Wi-Fi wireless technology, allowing you to control the K1 in person or remotely.

8.7 x 8.7 x 9.8" Building Area    0.1 to 0.35mm Layer Resolution    Single Extruder Design    1.75mm Filament Support    Multiple Filaments Supported    4.3" Color Touchscreen    Flexible Heated Build Plate    Auto Leveling Capabilities    USB & Wi-Fi Connections    Die-Cast Aluminum Alloy Frame

With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03 seconds, delivering full speed in 90% of the printing time.

A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.

The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.

K1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.

Give a tap, and K1 will self-test the extruder, heat bed, camera (optional), fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without a hitch.

An array of strain sensors is embedded in the heat bed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.

A G-sensor in the printhead measures the resonance frequencies of high-speed printing and auto-tunes the printer to mitigate it. No more ghosting or ringing on the print.

The K1 is compatible with ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, and PET-CF filaments.

Related Questions and Answers

Q: 1. Will this unit support the use of 24mm - 70mm zoom lens which is quite heavy?

A: I feel it would. I have used it with my 70-300

Q: 2. battery pack compatible ?

A: I'm not sure as I haven't used with a battery pack. I found the unit hard to use with Canon 5d. It had a difficult time keeping the same position due to the camera size/weight. IV used it only once as a result.

Q: 3. What is the gray back of this backpack made of? Hard plastic?

A: The Manfrotto Advanced Fast III Backpack (Black, 18.5L) uses high-density EVA foam on the back of the pack.

Q: 4. Would this work with a Canon 5DMII and battery grip and easily switch to vertical-portrait position without hitting the side of the handle?

A: There is 9in from the bottom bar to the top bar, so if your camera with batter is less than 9in is should work for you, I hope that helps

Q: 5. I have a Nikon z7 and a 24-70 f/4. I might occasionally carry a second lens, which I don't own yet, the 14-24 or 14-30. In addition, I am hoping to have room for a light raincoat or even a sweatshirt, a waterbottle, snacks, etc. Do you think this would all fit in this bag? I'm having a lot of trouble finding a bag that has enough room for the personal items, a small camera area for just a small mirrorless kit, but isn't huge/tall (I'm 5'2).

A: Yes, the Manfrotto Advanced Fast III 13L would be suitable for the items you wish to carry.

Q: 6. Fits a Sony 7RIV with a second gen 70-200 2.8 attached? Can you take this camera/lens configuration out the bag from the side aperture?

A: The Sony a7R IVA Mirrorless Camera with the Sony FE 70-200mm f/2.8 GM OSS II Lens attached does fit in the Manfrotto Advanced Fast III Backpack (Black, 18.5L) and can be accessed from the side panel.

Q: 7. Will this bag fit a Canon 5DIV with the 70-200 f2.8 zoom attached? Sideways as shown? Manfrottos says site it fits a "70-200/4"

A: Yes. The Manfrotto Advanced Fast III Backpack (Black, 18.5L) will hold the Canon 5DM4 with a 70-200mm f2.8 lens attached.

Q: 8. Will this work with a Nikon D300 and MB-D10 grip?

A: Yes it will work nicely with the D-300 and your grip but if you use the TTL sync cord it does get tight on rotating between vertical and horizontal. Work it slowly and you should be okay.

Q: 9. What's the diameter of the light?

A: this light is not in stock so i can not measure the light. this is what the website said 0.67 x 10.24 x 37.87" / 1.7 x 26 x 96.2 cm

Q: 10. DOes this printer need to be connected to computer by USB cable?

A: You can connect your computer to the Brother QL-810W Ultra-Fast Label Printer with Wireless Networking either using WIFI or with the USB Cable that's included.