The SURGEX Squid Power Management System | Efficient Energy Controlfrom SURGEX Squid Power Management System | Efficient Energy Controlis an AC and DC power distribution unit with power conditioning, control, and monitoring. Thanks to its small form factor, you can mount it to a wall, a table, or against the face of an equipment rack. It features an internal web server that provides configuration, output control, monitoring, and the retrieval of data logs. Multiple security and communication interface options are also supported.

This PDU has one IEC320 C14 AC inlet, four IEC320 C13 AC outlets, two 5V USB-A ports, an RJ45 network port, a micro-USB port, and two recessed push buttons for hardware and software reset. There are also five DC terminal blocks with a 5V output, plus two output banks, each with two ports. Each DC output delivers 2.4A at 24V. Also featured is under-voltage auto shutdown that is adjustable from 0 to 300V, overvoltage auto shutdown that is adjustable from 125 to 300V, and overcurrent auto shutdown that is adjustable from 0.1 to 20A. All three of these may also be disabled.

The Squid's software offers a single solution for management, mitigation and control of a system's power. Its competencies include sequencing, scheduling, auto-ping, IP control and monitoring plus reduced service calls through proactive management. Its 360° of power protection helps ensure equipment remains up and running without disruption.

AC/DC Power Distribution Unit    Power Conditioning, Control & Monitoring    Four IEC320 C13 AC Outlets    IEC320 C14 AC Inlet    Operates Using 120V at 50/60 Hz, 12A Max    Five DC Terminal Blocks    DC Output 1: 2.5A at 24V    DC Output 2: 5A at 12V    Two USB-A 5 VDC Outputs    RJ45 Port | Micro-USB Port

• Universal 120V-240V AC input with IEC connectors
• 4 controlled and monitored AC receptacles
• 3 DC banks, 2 controllable
• Measures electrical parameters including voltage, current, power, frequency, power factor, and crest factor
• Time-stamped power quality events
• Internal storage with 30 days of max/min/avg electrical parameters
• Wired ethernet for web server (HTTP/HTTPS), 802.1x authentication
• TLS, SSL, SNMP V3, single sign-on
• Two 5V USB ports for charging
• Compact size fits along, behind, or near equipment

Related Questions and Answers

Q: 1. Se podran adquirir juegos de engranajes para el motor de lente en otras medidas , como por ejemplo de las siguientes medidas 0.5, 0.6, 0.8, 1.0 ?

A: Comunquese con Tilta directamente para obtener asistencia para este producto en support@tilta.com(Translated with Google Translate)

Q: 2. How would I mount the grip to a tripod handle?

A: Tilta does have adapters however does not list their sizes nor does B&H sell them. We believe that this adapter may be the one shown in the Tilta Nucleus-M video. http://bit.ly/2CEKTnY. Also this adapter from Wooden Camera should work on most any tripod pan handle. Wooden Camera Tripod Head Pan Bar to ARRI Rosette B&H # WO251800. If you email us with the diameter of your tripod pan handle, we can find out what adapter Tilta recommends. provideo@bhphoto.com.

Q: 3. es compatible con cmaras tipo eng ? montando una ptica tipo CANON KH10EX3.6 IRSE

A: No es la forma en que es. Las lentes ENG tienen un engranaje diferente que no es 0,8 que se encuentra en las lentes de cine, que es lo que el sistema est diseado para.El engranaje alrededor del foco y el zoom del can.

Q: 4. What are my options to add the right handle to a regular Tiltaing Camera Cage like the Kit C for the Fuji XT-3?

A: Yes. In order to do so please review the following item Tilta 1/4"-20 to ARRI-Style Rosette for Tiltaing Panasonic GH & Sony a7/a9 Cages (Black) BH #TIAARA1B • MFR #TA-ARA1-B https://bhpho.to/37T7qlp

Q: 5. With this device, do I need anything else to control my epson pro l1300u via rs232?

A: You may need enough small gauge 3 conducter wire to connect between interface board placed near projector and the Pixie Plus control mounted in wall. I use a shielded pair 22ga. used for security sensors. You may also need a short 9pin male to female rs232 cable 3-6 ft. to connect with projectors rs232 connector and interface board

Q: 6. Can this charge a 10,000mah D cell in one pass?

A: This will not charge a 10,000 mAh D battery. It would take more than 24 hours to charge.

Q: 7. The system comes with 2 handgrips -one to control focus, and the other iris and zoom, but the set includes only 2 motors, don't you need 3?

A: Yes, you will need to purchase an additional motor for focus, iris, and zoom when working with the Tilta Nucleus-M Wireless Lens Control System: Tilta Nucleus-M Motor Kit I (B&H # TIWLCT03M1)

Q: 8. Can I charge the eneloop pro AA 2550mAh optimally on this charger? I mean, full-fast charge, like with the eneloop charger...

A: It will charge the 2550 mAh eneloop batteries faster than the eneloop Pro charger. Eneloop Pro AAs will fully charge in less than 9 hours.

Q: 9. Could I attach this handgrip to a regular tripod arm?

A: Yes, you could attach the handgrip in the Tilta Nucleus-M Wireless Lens Control System Partial Kit II (Right Handgrip) to a regular tripod arm. You will also need a clamp with an ARRI-standard rosette adapter.

Q: 10. Can you send a sync such as from a Tentacle through the nine pin LEMO port on a motor and have it pass through to the camera, specifically a Komodo?

A: No, The Tilta Nucleus-M would not pass timecode.