Get your next build off on the right foot while embracing proper airflow with the black NZXT H9 Flow Mid-Tower Case. Designed for new and seasoned builders, the H9 Flow streamlines component installation, giving you ample room for a wide range of gaming-focused components and extensive cooling capabilities.

Each of the steel and tempered glass panels can be removed for complete 360° access. You get enough room to install Mini-ITX, Micro-ATX, and ATX motherboards comfortably with 6.5" of clearance for CPU coolers. Seven full-sized expansion slots are available for powerful graphics cards measuring up to 17.1" long while still promoting airflow around the rest of your components. Four 120mm fans are pre-installed in the H9 Flow, promoting quiet operation with low noise. You get two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and a single 3.5mm combo audio jack, each allowing you to connect a range of peripherals from controllers to headsets.

Mini-ITX, Micro-ATX, & ATX    Steel Frame & Tempered Glass Window    6 x 2.5" Drive Bays    2 x 3.5" Drive Bays    7 x Expansion Slots    2 x USB 3.2 Gen 1 Type-A Ports    1 x USB 3.2 Gen 2 Type-C Port    4 x 120mm Quiet Airflow Fans Included    Support for GPU's up to 17.1" Long    Support for CPU Coolers up to 6.5" High

The H9 Flow has enough room to hold a wide range of storage drives. There are a total of four 2.5" drive bays and two 3.5"/2.5" bays. The drive cage can be adjusted so you can fit larger power supplies or removed completely if you prefer. Two 2.5" drive sleds can be moved from the back of the motherboard tray to the PSU shroud if needed.

While four 120mm fans are included, you can install a total of three 120 or two 140mm fans at the top bracket of the H9 Flow. Three 120mm fans can be installed at the side of the H9 Flow, and the rear can support a single 120 or 140mm exhaust fan. Additionally, thanks to the design, you can equip three 120 or two 140mm fans at the bottom. The side, top, and bottom can support liquid cooling radiators up to 360mm and up to 120mm at the rear.

Tool-less front and side access enables you to quickly access your components without the need for screwdrivers. Easily route cables on the inside of the H9 Flow with a 3.5" cable management space. You also get wide cable channels as well as hooks and straps to secure your cables down.

Related Questions and Answers

Q: 1. Will it fit a Tamron 16-300mm lens?

A: May be a bit too big. The Lowepro Compact Zoom Lens Case 8x12cm might be a better fit - the Tamron 16-300 is approx. 7.5 x 10cm) from what I've read. The 8x12cm case leaves plenty of room for a filter. Haven't tried it myself though.

Q: 2. Would a Tamron SP 15-30mm f/2.8 Di VC USD Lens *Nikon would fit in it ?

A: The Tamron SP 15-30mm f/2.8 Di VC USD Lens would fit in the Ruggard Lens Case 6.0 x 4.5 .

Q: 3. Will this case fit a Sony 18-200 lens?

A: The Sony E 18-200mm f/3.5-6.3 OSS LE Lens measures 2.68 x 3.82 , so it will fit in this Lowepro case.

Q: 4. Is the Ruggard Lens Case 5.0 x 3.5 the right size for a Canon EF-S IS 55-250mm ?

A: I bought it for a Nikon 105 mm lens (3.3 x 4.5 ) - fits perfectly. Specs for your Canon are 2.8 x 5.3 so the case may be a bit short.

Q: 5. Which Ruggard Lens case is the right size for a Canon 24-70?

A: I have my 24-70mm and 2 screw on filters (in lens cases) in the lid of the 8 inch Ruggard Lens Case. This works very well for me.

Q: 6. can this hold these lenses: 20mm + 50mm + 18-50mm ??

A: Nope. Buy larger case with higher height.

Q: 7. Will this case hold a Canon EF-S 55-250mm f/4-5.6 IS II lens?

A: I use this case for a TAMRON 70-300mm lens. With the back cover, UV protector, cap and a cap-keeper (elastic around lens with little button that sticks to the cap), my whole lens is 6 1/8 in. long. That fits, but it's a bit tight. I also keep the lens hood in the bottom which is fine because the lens fits through it. So, measure the length of your lens setup like you want it to go in there.This case has a mesh pouch in the lid which I can't use due to the length issue, but it could hold a battery, memory card or filter (but probably not in filter's original case) if you have a shorter lens.The interior diameter is 3-3 1/2 in. with good padding, almost 1/2 in. thick. My lens has plenty of room at just under 3 in. at widest point, still protected well. I have this case velcroed onto a matching Lowenpro zoom bag. Fits nice and tight, but the whole thing is a little unbalanced with no exterior pouch on the other side. That would be way too big for me. I compensate by wearing it cross-shoulder rather than in front with a chest or waste strap

Q: 8. Is the Ruggard 3.5 x 3.5 case the right size for the Canon EF-S 10-18mm f/4.5-5.6 IS STM lens?

A: Mine was for a Nikon lens, worked fine.AS-S MICRO NIKOR 105mm lens is 3.5 x 5.5

Q: 9. Will this fit a Fuji 55-200 lens, or is too big?

A: This case is appropriate for the FUJIFILM XF 55-200mm f/3.5-4.8 R LM OIS Lens.

Q: 10. will sony 70-350 lens fit?

A: The Sony E 70-350mm f/4.5-6.3 G OSS Lens is 3.03 x 5.59". Therefore it will fit in the Ruggard Lens Case 6 x 3.5" (Black).