Bright Tangerine Leftfield 3 Kit For Canon C500 Mark Ii

Product Code: eq171876
Availability: In Stock

$4,119.39 $5,231.63

Qty

7 reviews Write a review

Description
Reviews (7)

The Bright Tangerine LeftField 3 Kit for Canon C500 Mark IIfrom Bright Tangerine LeftField 3 Kit for Canon C500 Mark IIcombines with different interchangeable Bright Tangerine riser blocks and dovetail plates for compatibility with multiple different cameras, tripods, and gimbals. The optional riser blocks provide the correct optical height for each camera and can be swapped in as needed.

The LeftField 3 Baseplate Core attaches to any ARRI-standard dovetail or the Bright Tangerine Left Field ARRI-Style Dovetail Plate. Using Bright Tangerine's Open•Up quick release system, it allows you to quickly switch between shoulder rigs, tripods, gimbals, and other camera supports such as the KASBAH shoulder pad. It also features a sliding, locking base that helps achieve optimal balance wherever you mount it.

The Baseplate Core provides front and rear 15mm LWS rod mounts for attaching accessories. Other LeftField components, such as side plates, supports, and grips can be attached to dedicated mounting threads to build up a full cage.

LeftField 3 Baseplate Core & Dovetail Canon Riser for 15mm LWS Rigs Sliding Top Plate Core, Top Handle 12" ARRI Standard Dovetail Monitor Bracket Adapter, 15mm Bracket Standard 15mm LWS Camera Height Durable Aluminum Construction

Parameters
Support Type	Baseplate
Grip Type	No
Mounting
Rod Standard	15 mm LWS / 60 mm Spacing
Battery Plate Type	No
Accessory Mounting	Multiple 1/4"-20 Female Thread
Camera Mounting	Quick Release Plate
Tripod Mounting	ARRI Dovetail
Rod Ports	2x 15 mm Rod Port
Shoe Mounting	No
Rosettes	No
Cable Clamp	No
General
Dimensions	4.9 x 4.4 x 1.3" / 12.5 x 11.1 x 3.3 cm
Weight	11.2 oz / 317 g
Packaging Info
Package Weight	0.725 lb
Box Dimensions (LxWxH)	5.8 x 5.35 x 1.95"

Combines with interchangeable riser blocks for compatibility with different cameras
ARRI-standard dovetail compatible
Sliding base
Front and rear 15mm LWS rod mounts
LeftField side plates and other components supported, including KASBAH shoulder pad
Multiple accessory mounts

Related Questions and Answers

Q: 1. I can't seem to find a "what's in the box" for this product. Is the video cable included? I'm just concerned about the length of the cable that came with the C300 mk3.

A: The Canon EVF-V70 OLED Viewfinder for C700 (B&H# CAEVFV70) does not include a cable. The two cables most commonly used with it are the Canon UN-5 Unit Cable for Select Canon EOS Cameras & XC15 (20") (B&H# CAUN5UC50) https://bhpho.to/3smRcYx and the Canon UN-10 Unit Cable for Select Canon EOS Cameras & XC15 (39") (B&H# CAUN10UC100): https://bhpho.to/2WhIiOu

Q: 2. Does the "false color" function work with the C200? Based on my research so far, it seems the answer is no - it seems like false color needs to be supported by the camera firmware (C700, C500 Mk II, C300 Mk II/III) itself.

A: I would also say the answer is no. According to the Canon website, this EVF is not combatable with the C200.

Q: 3. Does it work with the Canon C500 mark ii?

A: Yes, it is compatible with the C500 Mark II as well.

Q: 4. Is this compatible for the c300 mark ii?

A: No it is not.

Q: 5. Will this mount to the original c500mkII handle or does it only work with the shape handle?

A: The product needs to mount on the Shape top handle.

Q: 6. Does this require any special mount to attach to a Canon C300 mk3? And when this is used on C300m3, I'm guessing the flip LCD can not be used, correct?

A: The following mount will attach this eyepiece to the Canon C300 Mark III. Canon CL-V2 Clamp Base for EVF-V70 BH #CACLV2 • MFR #2419C001(---- Please copy and paste either number into a B&H search box)

Q: 7. Can the rod portion be removed?

A: Yes, on the Wooden Camera Mini Monitor Hinge for Canon C300 Mark III and C500 Mark II, the 15mm rod is removable.

Q: 8. Will this support 1920x1080 resolution at 120fps on the C300 mk3 ?

A: The EVF has a maximum refresh rate of 60p. This does not affect your ability to record or view footage that is 1920x1080 at 120fps. The camera processes so that the image can be displayed properly on the EVF.

Q: 9. What mount is need for a c300 mark ii

A: You can use the Canon CL-V2 Clamp Base for EVF-V70 to attach the Canon EVF-V70 OLED Viewfinder for C700

Q: 10. Would this work for the c200?

A: Sorry, no. This is for the C700 only.

Timothy	25/09/2024
[0.725 lb] Really loving this system so far. The dovetail plate is super secure with a great quick release. I mostly started looking at this because of the top hand brace, which always seemed like a weak part of the fx6 if you plan to load it with extras. Adds rigidity all around with convenient mounting points. 5

Juan	19/09/2024
[ARRI Dovetail] This is THE solution for add rods to your komodo and being able to go from tripod to handheld in literally 2 seconds. The latch design is perfect and clamps down tightly to your dovetail plate. The placement of the tightening knobs for the rods is nice. I was initially going to go with the 8Sinn baseplate but after careful review I noticed that the knobs for tightening the rods interfere with the other knobs. In my opinion, I saw this as a possible hinderance to the ease of use I was looking for as I'm regularly in fast paced situations where struggling with any piece of gear is unacceptable. If you can afford it, you won't regret it. Its a deceptively simple tool but a must if you care about your gear working flawlessly and not worrying about fiddling around with the quirkiness that can come from some of the cheaper solutions. 5

Taylor	08/09/2024
[Baseplate] First camera cage system from BT and it's awesome. I bought the original Kasbah system alongside the Misfit kick back in the day and was impressed by the functionality, quality, and their efforts to keep things light weight while still strong/solid. When it came time to get a cage for the Burano, I knew I wanted to try BT over the other options that were first to market apon its launch. The side rails connecting top and bottom inspire confidence for mounting things pretty much anywhere on the rig. The sliding top plate is slick, I'm getting another one for quick swaps to my movi alongside a BUD plate for the bottom. The D handle is solid and comfy. Paired with my Kasbah shoulder rig, its the quickest to build and comfiest to shoulder all day compared to other systems I've tried/built in my AC days. You won't regret it! Also the customer service is TOP with BT. They just called me within 15 mins to get clarification on a support email I sent regarding plate compatibility. Who does that these days?! 5

Evan	08/08/2024
[Baseplate] I did not need to remove anything on the RS3 Pro to be able to use this plate. Since I use this style of plate on everything, I got the cage pieces for it and now have a solid cage for the C70. Nothing feels loose (Tilta cage...) and the mounting points on the cage are thought out well. 5

Jared	02/07/2024
[ARRI Dovetail] Ive been saving up for a Bright Tangerine Revolvr Atom because I wanted something versatile and fast with my set up for a lot of the run and gun shoots that I do. When I first got my package from B&H, my kit was missing the hand wheel piece. I called B&H the next day and they advised me to contact Bright tangerine myself to retrieve the missing piece. Luckily, within 5 minutes of emailing Bright Tangerine with my order mix-up, they had responded and had the hand wheel overnighted to me the very next day. Its great knowing when you buy top quality gear, that the manufacture takes enough pride to offer top quality service as well. I cant wait to see what other film making tools Bright Tangerine will start to make. 5

Cameron	23/05/2024
[0.725 lb] Is it expensive? Yes. It is flawless and perfect? Yes. I just love everything about it. My only maybe SLIGHT complaint, is I wish it had some Rosette mounts in this kit, but I easily added the BT side plate to finish it out! 5

michael	30/11/-0001
[Baseplate] I had originally bought the standard komodo baseplate from Bright Tangerine but realized it only had one screw and would twist on the camera showing off alignment of my matte box etc. This DJI version has tabs that fit into the base of the komodo and prevent twisting. It does cost more but is so much better. 5