You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Cougar Duoface Rgb Mid-tower Case Black

Cougar Duoface Rgb Mid-tower Case Black
  • Product Code: eq171984
  • Availability: In Stock

$269.97 $364.46

Begin your next PC build with confidence using the black COUGAR Duoface RGB Mid-Tower Case Blackfrom Cougar. View your components with ease through the tempered glass side and front panels. With support for ATX, Micro-ATX, Mini-ITX, CEB, and E-ATX motherboards, the design is approachable to new builders while providing plenty of upgrade room for experienced users.

ATX, Micro-ATX, Mini-ITX, CEB, and E-ATX    Metal Frame & Tempered Glass Side Panel    2 x 3.5" Drive Bays    2 x 2.5" Drive Bays    10 x Expansion Slots    2 x USB 3.0, Headset Audio Jack    1x 120mm & 2 x 140mm RGB Fans Included    Sliding Dust Filter    Radiator Support    Supports GPUs up to 330mm

Key Specs
Motherboard SupportATX, E-ATX, Micro-ATX, Mini-ITX, SSI-CEB
Internal Drive Bays2x 2.5/3.5"
Drive Mounting (Non-Bay)Motherboard Tray
2x 2.5"
Expansion Slots7x Full Height + 3
Maximum GPU Length13.0" / 330 mm
CPU Cooler Height7.5" / 190 mm
Fans IncludedFront:
2x 140 mm LED (1000 rpm)
Rear:
1x 120 mm LED (1000 rpm)
I/O2x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
1x USB-A (USB 2.0)
Windowed PanelYes
Built-In LightingYes
Tool-Less DesignThumbscrews
Compatibility
Motherboard SupportATX, E-ATX, Micro-ATX, Mini-ITX, SSI-CEB
External Drive BaysNo
Internal Drive Bays2x 2.5/3.5"
Drive Mounting (Non-Bay)Motherboard Tray
2x 2.5"
Expansion Slots7x Full Height + 3
Maximum GPU Length13.0" / 330 mm
CPU Cooler Height7.5" / 190 mm
Supported PSU SizeATX
Maximum PSU Length6.3" / 160 mm
PSU Mounting LocationBottom
Cooling
Fan MountingFront
2x 120/140 mm
Rear
1x 120/140 mm
Top
2x 120/140 mm
Fans IncludedFront:
2x 140 mm LED (1000 rpm)
Rear:
1x 120 mm LED (1000 rpm)
Maximum Radiator SizeFront:
280 mm
Rear:
140 mm
Top:
280 mm
Fan Controller IncludedYes
Filter LocationsFront
Inputs / Outputs
I/O2x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
1x USB-A (USB 2.0)
Media/Memory Card SlotNo
Audio I/O1x 3.5 mm Input/Output
Display OutputsNo
Physical
Windowed PanelYes
ColorBlack
MaterialTempered Glass
CertificationsNo
Built-In LightingYes
Tool-Less DesignThumbscrews
SecurityNo
Cable Management SpaceYes
Dimensions (W x H x D)9.1 x 19.3 x 15.2" / 231.1 x 490.2 x 386.1 mm

Two 140mm fans come preinstalled to the front of the case, and a single 120mm fan in the rear. A sliding design allows you to remove and clean the dust filter without removing the front panel, promoting unobstructed airflow and efficient maintenance.

Included with this chassis are two 3.5" drive bays, two 2.5" drive bays, and ten expansion slots which provide numerous options for immediate and long-term storage.

This case features many options when it comes to building your next PC:

  • Rear support for one 120 or 140mm fan or radiator
  • Top and front support for two 120 or 140mm fans, or one 120, 140, 240, or 280mm radiator
  • Air CPU cooler support for units up to 190mm
  • Support for GPUs up to 330mm without a front radiator
  • Support for vertical GPUs

This case features two USB 3.0 ports, one USB 2.0 port, and a headset audio jack and an RGB button.

Related Questions and Answers

Q: 1. Will this fit four GODOX TP4R tube lights?

A: No, the Godox CB47 Carry Bag is specifically designed for use with the Godox TL120 RGB Tube 4-Light Kit. When deflated the Godox Air Soft Tube for KNOWLED TP4R Tube Light's are folded and no longer in a tube shape .Though the insert can be removed the case is not designed for the TP4R and included accessories. The box dimensions for the lights is 20.8 x 17.1 x 5.2".

Q: 2. Will the 6x4.5 fit the Nikon z85 1.2S lens?

A: Yes, the Ruggard Lens Case 6 x 4.5" (Black) will fit the Nikon NIKKOR Z 85mm f/1.2 S Lens (Nikon Z) with the hood reverse mounted.

Q: 3. Does the mfd display screen work for real time Info

A: Yes it does.

Q: 4. Will the LCY-16X4 fit a Nikkor Z MC 105mm lens?

A: The Ruggard Lens Case 6 x 4.5 will fit the Nikon 105mm Z macro lens.

Q: 5. Is the 6.0 x 3.5 large enough for a Zeiss 135mm ZF.2 APO, with the shade attached in the storage position? Thanks

A: I don't know if it will work with you lense, I use it for a differente one placing the hood on backwards when storing it the case.

Q: 6. Will this case fit the Sony Vario-Tessar T* FE 24-70mm f/4 ZA OSS Lens?

A: Yes it will. The Sony Vario-Tessar T* FE 24-70mm f/4 ZA OSS Lens, B&H # SO24704, has dimensions of Dimensions ø 2.87 x H 3.72". This case has interior dimensions of ø 3.5 x H: 5.1", which gives you ample room for the lens.

Q: 7. Will this fit a Canon EF 75-300mm f/4-5.6 III lens?

A: No I don't think so sorry.

Q: 8. Will it fit the Sony macro sel90m28g?

A: The case is a too small. This is a few options that will work.1.Ruggard Lens Case 6.0 x 3.5 (Black) B&H # RULCY16X3 MFR # LCY-16X32.Lowepro Medium Zoom Lens Case 9x16cm (Black) B&H # LOLP36979 MFR # LP369793.Mountainsmith Lens Case (Medium) B&H # MOLCMG MFR # 14-81270-65

Q: 9. Will it hold canon 24-70 ll f2.8 ?

A: It's little bit small for my lens

Q: 10. Do NOT use with Tamron 28-75mm 2.8 zoom?

A: Hi--the Tamron 28-75mm lens will fit in this case.

28/09/2024

[Yes] This is a great, quality, low price case. It is larger than your average case, so if you do not plan on putting a lot of stuff inside you may have some extra space left over (for RGBs and Funkopops?). I plan on eventually getting a double fan water cooler so it will work out in the end, I like it.

5
07/09/2024

[Thumbscrews] Great looking case and good wire organization

5
07/09/2024

[Yes] So I haven’t built a pc in ten years and used a MSI mid atx mobo in this case with no issues whatsoever. I love the plexiglass on the side it almost looks like tempered glass and it’s tinted just enough. Instructions and supplies were perfect and clear. I would not suggest for RGB power supply as you can’t see it lol, but other than that cable routing is simple and plenty of room for fans and drives with dedicated spaces for everything. Love it.

5
01/09/2024

[Yes] Thanks a lot.
5/5

5
29/08/2024

[Yes] The case itself is fairly sturdy, with space behind the motherboard mounting wall for managing cables, and in the power supply bay if using a standard size power supply (600W EVGA fits great). With two different PSUs, the screw hole for the upper right position (facing the rear of the case) did not line up, so it is held in with only three screws. Even so, it seems quite secure.
There are many ports for routing cables, several of which have rubber grommets to keep the holes closed and improve appearance.
I installed five PC Cooler Corona fans and an MSI full ATX motherboard with plenty of room to spare. The fans and case lighting system are being managed by the MSI Mystic Light system, so it is all coordinated. The front light bars are better than I expected.
Note that the included fan is RGB, but it is not ARGB. It has a beautiful soft glow which runs in a continuous rainbow pattern, but it is not controllable.
The only design issue I found is with the cover for the vertical video card installation (which I am not using). Once I mounted a two slot video card in the motherboard, the cover would no longer go back in place correctly. I think this would happen any expansion card you install; they didn't allow for the space that the backplanes take up. I had to use a small wire tie to secure the upper end of the cover to the case, as the original screw hole no longer aligned.
I wish it had a reset switch, but I knew it did not before I bought it.
I have seen a few complaints that the glass is too dark. It seems about the same as other darkened panels I have seen, so I think it is fine.
Case was well packaged in double wall cardboard, which was good because FedEx went through first layer in several places, and through both layers at one location. Fortunately the penetration did not dent the case wall.
Overall, I am very pleased with it.

5
25/08/2024

[Black] I’ve had it for three months I want to say premium for the price that included the fan is quiet I love the window tint it makes my RGB could components look cool

5
29/07/2024

[Yes] I purchased this case for a new build. I wanted the glass panel and for the price this looked like a solid option, turns out I was right. I fit everything I wanted to into the case.

5
16/06/2024

[2x 2.5/3.5"
] First, the case was backordered and never made it for Christmas; my grandson was very disappointed. However, once we began the PC build, it was a perfect base for him.

5
04/06/2024

[Yes] This case has all of the features I need, including ample ventilation through 5 of the 6 sides, loads of room for upgrades of every kind, and a strong, sleek design that does look like the inside of a Las Vegas pimp van. If you're the kind of guy who buys a cheap, beat-up, old Ford Escort for $300 and then drops $20,000 turning it into a tuner with LEAD accents, fresh wheels, some decals and a whale tail, then you won't like this case. This is more of a Yukon XL. It's not the hottest thing on the market, but it fits right in parked in the VIP lot.

5
27/05/2024

[Yes] Bought this for a simple, first-time PC build. Case was a little larger than I expected (I honestly didnt pay much attention to the dimensions or I would have known), but I dont consider that an issue. Item arrived undamaged, it is well constructed, and it looks great.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products