Falcam Maglink Magnetic Buckle Mini Kit

Product Code: eq172071
Availability: In Stock

$59.97 $72.56

Qty

17 reviews Write a review

Description
Reviews (17)

Quickly and securely attach your camera to your strap with the Falcam Maglink Magnetic Buckle Mini Kitfrom Falcam. These quick-connect buckles are easy to install on your camera and strap, and they won't come apart unless deliberately pulled. The female buckle is made from a soft thermoplastic material that won't scratch your camera and the tail buckle is made from wear-resistant, 18-braid Dyneema rope. These straps are suitable for heavier cameras and support loads up to 132 pounds.

2 Thermoplastic Female Buckles 2 Dyneema Rope Tail Buckles Buckles Support up to 132 lb Magnetic Quick Release

Parameters
Color	Black
Load Capacity	132.3 lb / 60 kg
Weight	0.7 oz / 19 g
Packaging Info
Package Weight	0.12 lb
Box Dimensions (LxWxH)	4.5 x 2.4 x 1.2"

Related Questions and Answers

Q: 1. Will this work with my Nikon d7200 and tamron 16-300mm lens? Thanks

A: This tripod will easy hold that camera and lens.

Q: 2. Will the Peak Design Dual Plate v2 work on this ball head?

A: Yes, as the Peak Design Dual Plate v2 for Capture Camera Clip is Arca-Type compatible, and as the ball head on the Joby GorillaPod 5K Flexible Mini-Tripod is also Arca-compatible, you may use the Peak Design Dual Plate v2 on the Joby GorillaPod 5K Flexible Mini-Tripod.

Q: 3. What is the difference between 3343 and 3444? Visually they same the same but one is more expensive.

A: The Falcam 3444 comes with a quick release plate included, while the Falcam F38 Quick Release Base for DJI RS 3 Mini 3343 does not come with a quick release plate. The 3343 is just a receiver.

Q: 4. It comes with the arm? And all I need?

A: The Falcam F38 Quick Release Base for DJI RS 3 Mini is just the base, no arm is included.

Q: 5. Looking to buy a first hiking tripod (budget 100$ or less), and trying to understand : would this be a better buy if winds are a problem? (I am assuming that I won't have a problem to find suitable sites to place/attach this tripod). Would I be better off with this than full- or medium-sized tripods at 100$ or less. I use a compact fixed lens mirrorless camera, so weight of camera is not an issue. Thanks

A: Wind would not be a problem with the Joby Gorilla Pod because even if you could not attach it to anything, it would be quite low to the ground so wind could not easily get underneath the tripod or camera.

Q: 6. Does the Joby GorillaPod5K Flexible Mini-Tripod come with a 3/8" stainless bushing which would allow me to use a small RRS BH-30 tripod head?

A: Yes, the "In The Box" section under the Overview tab under the JOBY GorillaPod 5K Flexible Mini-Tripod states that a 3/8"-16 Screw Thread Adapter is included with the purchase of the tripod (along with the Limited 1-Year Warranty). The 3/8"-16 thread adapter at the top can be removed to reveal a 1/4"-20 screw, so you may use tripod heads that have either a 1/4"-20 or a 3/8"-16 female tripod socket on the base of the tripod head.

Q: 7. How to loosen the legs? My gorillapod came incredibly stiff and if barely usable.

A: The legs would have some stiffness in order to allow for a tighter grip around certain surfaces like a tree limb or a pipe.

Q: 8. Hiiiiii! Where is this GREAT tripod made? Thanks so much!!

A: The country of origin for this item would be China

Q: 9. What is the minimal height of the tripod?

A: If factoring in the ball head and the legs spread completely, the minimum height would be about 5 inches.

Q: 10. will this work with peak design arca swiss square base plates?

A: Falcam F38 Quick Release System for Shoulder Straps will not work with peak design arca swiss square base plates.

Cuong	19/09/2024
[Black] I enjoy it so much when remove the camera and snap back to the Quick Release. It’s so easy and convenience, 5

Sebastian	27/08/2024
[Black] Watch the Falcam Youtube promo video to see they used it on the Hasselblad X2D! Bought this for that very purpose, and it does work. reason, the 'thread' is thinner than Peak Design's but as strong, IMO. I also like the magnet connector better. I have since given my PeakDesign lugs to a friend and switched over to this. :D Of course, YMMV! 5

Tom	16/08/2024
[Black] As an amateur photographer I always looked like a tourist with my camera hanging off my neck. Hesitant to abandon the strap that came with my Nikon camera and frustrated with raising it off my chest and fighting with the strap, this buckle base is the solution. Securely holds camera with a confident “click”. Camera naturally hangs vertically and out of the way. The release is intuitive and the buckle base is lightweight. Made from metal provides additional confidence that camera is safely secure and fail safe. I need to step up my game to match my new look as a professional photographer. You need to buy this buckle base with confidence. 5

Izzy	06/08/2024
[0.12 lb] I installed this F22 on my GoPro hero 10 black yesterday and it fits like a charm! mounts to the DJI mount and locks in. I pulled on it and was on secure, pressed the release clips and off it came. Strong magnet holds it on pretty strong. I will be ordering more for my other Hero 10. 5

David	05/08/2024
[0.12 lb] This Quick release is a great addition to my kit. While I have Peak Design quick releases on all my cameras, this is likely to be my new favorite. Very easy to attach and release. No concerns about security. 5

Drew	24/07/2024
[0.12 lb] Such a nice upgrade for any GoPro. Word of caution though, this one doesn't have the f22 mounting base -- I didn't notice and ended up ordering that one too. I love how slick this just replaces the stock plastic GoPro tabs with something so much more usable. The 1/4 20 thread in the middle is genius and the magnets and metal tabs feel bomber. 5

SVNYC	24/07/2024
[Black] It does what it intends to do brilliantly. For those who would love the Magnetic mounting system of the DJI Osmo action on your GoPro look no further. What's even better is that you can still use your old GoPro connection giving you endless mounting flexibility. The only downside is that it does protrude a little once installed, but not enough to affect functionality. 5

Ryan	17/07/2024
[0.12 lb] I can’t believe Peak Design doesn’t make a version of this. It solves a problem I’ve always had as I regularly move between having my camera on a neck strap and wrist strap. This device allows me to disconnect my camera from my neck strap and wear the strap without having to pack it away when it’s not connected to the camera. I like options and this is exactly what this thing gives. I lives on my strap unless I need to connect my strap to a larger telephoto lens. It also fits the Capture Clip V2 plate perfectly and fits into my current ecosystem of Peak Design gear perfectly. I really can’t believe Peak doesn’t make their own version. 5

Joshua	16/07/2024
[0.12 lb] I love the F38 QR system, it's so handy. This makes it all the better. I can quickly move the camera on and off the strap as needed. Highly recommended! 5

Dragan	13/07/2024
[0.12 lb] Falcam F38 Quick Release Buckle Base for Shoulder Strap V2 is a great addition to my photo equipment. Solid and precisely made just like the other Falcam products I use. I recommend it 5