Add a compact monitor to your camera or gimbal rig with this FeelWorld LUT6E 6" 4K HDMI Touchscreen Monitorfrom FeelWorld. The monitor is designed with a high brightness of 1600 cd/m², suitable for indoor or outdoor use. It features a 1920 x 1080 touchscreen display and HDMI input and loop output, supporting up to DCI 4K30 resolution.

An intuitive UI is controlled with touch and swipe gestures and offers access to menus and functions such as built-in 3D LUTs, anamorphic de-squeeze, vectorscope, zoom, focus assist, and more. The LUT6E also allows you to upload up to 50 3D LUTs via an SD card slot. Power options include an integrated L-series battery plate and a DC power input port. There's also an auxiliary DC power output that allows you to run small cameras off the monitor's power supply. The LUT6E provides a 1/4"-20 mounting thread on the bottom and on the right side, and it includes a tilt-adjustable mounting arm.

High-Bright 1600 cd/m² Monitor    Compact and Slim with 1080p Touchscreen    DCI 4K30 HDMI Input and Loop Output    Load 3D LUTs via SD Card Slot    Integrated L-Series Battery Plate    Auxiliary DC Output for Powering Cameras    Scopes, Anamorphic De-Squeeze, and More

The screen brightness is adjustable to up to 1600 cd/m², has an HD resolution of 1920 x 1080, and a wide viewing angle of 160°.

Load up to 50 custom LUTs via an SD card slot to see what your image will look like when you apply a LUT in post-production.

Connect to virtually any camera via the HDMI input, and at the same time, an HDMI loop output lets you connect to a larger display for simultaneous monitoring or to a wireless transmitter.

A 3.5mm stereo headphone jack provides audio monitoring.

The LUT6E offers a 1/4"-20 mounting thread on the bottom and one on the right, and a tilt arm is included.

The monitor has an integrated L-series battery plate and offers a 12 VDC power input port for continuous power. The monitor also provides auxiliary DC power output, allowing you to power select cameras from your monitor battery.

The operating system provides a touch-and-swipe workflow for working with LUTs and tools for focus, framing, exposure, audio monitoring, anamorphic de-squeeze, and much more.

• 3D LUT support
• Built-in HDR/DeLog 3D LUTs
• Parade (RGB, YUV, Y)
• Vectorscope
• RGB histogram
• Histogram
• Peaking focus assist
• False colors
• Zebra exposure (adjustable 1 to 100%)
• Underscan
• Overscan
• Zoom (100 to 300%)
• Anamorphic de-squeeze (1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag)
• Pixel-to-pixel
• Nine-grid
• Center marker
• Safety marker (70, 80, 90, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1)
• Ratio marker (16:9, 16:10, 4:3, 1.85:1, 2.35:1)
• Marker color (red, green, blue, white, black, yellow)
• Check field (red, green, blue, gray)
• Image flip (H, V, H/V)
• Image freeze
• Color temperature adjustment

Related Questions and Answers

Q: 1. Will this work with the Nikon D750? Thanks

A: Yes, you will need an HDMI cable to connect the monitor and D750.

Q: 2. Will this monitor wotk with Red Komodo?

A: it will work with any camera with standard video outputs

Q: 3. Is the fan noise a problem when recording with an external mic on camera rig cold shoe?

A: There is a slight buzz that may be picked up depending on the nature of the set you are shooting in.

Q: 4. Will this work with a Canon 5Dm4 & Panasonic G9, , Do I need a external Recorder? can I send recordings to a Cell Phone with HDMI ?

A: Yes, the FeelWorld LUT6 6" 2600 cd/m² 4K HDMI Touchscreen Monitor is compatible with the Canon 5D Mark IV and Panasonic G9 via HDMI, but the monitor does not have any recording features.

Q: 5. does it have the option of powering with sony np f batteries or only Canon batteries?

A: Yes you can use Sony NP-F batteries to power this monitor.

Q: 6. Is it possible to input via HDMI from your camera, and then output to a larger monitor via BNC?

A: The outputs on the Feelworld LUT6S 6- 2600 cd/m² 4K HDMI/3G-SDI Touchscreen Monitor are loop outs only, and do not support HDMI to SDI cross conversion. In order to do so, you would also need an HDMI to SDI converter.

Q: 7. Can this monitor be used to power the Sony a7 IV with a dummy battery?

A: Yes, you will be able to power the Sony A7 IV off of the FeelWorld LUT6 using a dummy battery.

Q: 8. Why do you use a misleading title? In the title you put 4k, but in reality this is a FHD monitor!

A: The FeelWorld F7 Pro 7" 4K HDMI IPS Touchscreen Monitor has an HD panel like many of the displays in this size range. There are very few if any displays in this size range that come with a 4k panel. However, the display will allow you to input, as well as output 4k content, which is the reason Feelworld adds 4k to the heading.

Q: 9. Do I need to purchase batteries and chargers separately?

A: Yes, batteries and chargers will need to be purchased separately. Items that come in the box are always listed on the right hand side of the overview.

Q: 10. Is the touchscreen responsive? I’ve found several cheaper touchscreen monitors to be hard to control with touchscreen.

A: Check out the FeelWorld LUT6 in a hands-on demo: https://feelworld.ltd/blogs/news/feelworld-lut6-lut6s-6-ultra-bright-2600nits-touch-camera-monitor-daylight-viewable-with-hdr-3d-lut