Embrace style and convenience while also promoting airflow with the XPG CRUISER Mid-Tower Case. Constructed from SGCC steel, breathable mesh materials, and a tempered glass side panel, you can turn your system into the centerpiece of your gaming room.

Thanks to the spacious design, the CRUISER can easily support Mini-ITX, Micro-ATX, ATX, E-ATX, CEB, and EEB motherboards, allowing you to comfortably fit a wide range of components. You get two 3.5" drive bays along with two 2.5 / 3.5" combo drive bays, enabling you to store massive amounts of data. Seven horizontal and two vertical expansion slots allow you to install utility and graphics cards up to 14.9" long. The CRUISER also supports CPU coolers up to 6.6" tall, giving you plenty of cooling options for your system.

M-ITX, M-ATX, ATX, E-ATX Support    Steel Frame & Tempered Glass Side Panel    2 x 3.5" HDD Bays    2 x 2.5 / 3.5" Combo Drive Bays    7 x Horizontal Slots    2 x Vertical Slots    USB-A 3.2 Gen 1 & 2 | 3.5mm Audio Jack    ARGB Fans Pre-Installed    Supports GPUs up to 14.9"    Supports CPU Coolers up to 6.6"

The front I/O panel gives you two USB-A 3.2 Gen 1 ports, giving you up to 5 Gb/s data transfer speeds. A USB-C 3.2 Gen 2 port gives you up to 10 Gb/s data transfer speeds, ideal for quickly transferring data from an external storage drive. A single 3.5mm combo audio jack supports various gaming headsets. You also get an LED control button that allows you to control your case lighting.

While the case can support a wide range of fans, three XPG VENTO 120 ARGB fans are included with two located at the front of the case and one at the rear. The CRUISER can also support three 120mm or two 140mm fans at the front, two 120mm or 140mm fans at the top, and one 120mm fan at the rear.

The CRUISER can support liquid AiO coolers, allowing you to install radiators up to 360mm at the front, 280mm on the top, and one 120mm fan at the rear.

You get a 0.71" cable management space behind the motherboard so you can easily organize wires comfortably.

Removable dust filters at the top and front of the case enable you to prevent a build-up of dust within your system, keeping your components clean and prolonging the lifespan of your system.

Related Questions and Answers

Q: 1. Does anyone knows if this would work with Interfit S1a?

A: This transmitter is only compatible with the Impact Cruiser monolight. A compatible transmitter for the S1A is the Interfit S1 TTL Remote for Nikon B&H # INRS1N. https://bhpho.to/2DYjvUP

Q: 2. no chance I can use the transmitter to control my Venture 600 light as well?

A: Unfortunately, the Impact Cruiser transmitter can only trigger the Impact Cruiser monolights.

Q: 3. Hi, I'm having the U2 error code displayed in the lcd screen, after my third charge of the battery pack. The test button is not longer lit (blue light) and the unit starts to emit intermittent sounds. Could you give some advise on this issue? Thank you! Daniel

A: We're sorry to hear of this issue. It is best to reach out directly to Impact for further assistance at 1-212-594-2120.

Q: 4. Will this unit set as CELL to ON (Slave Option enabled) be fired by a Canon Flash 580EX that is connected to my Canon 6D trough the Impact PowerSlave Wireless Flash Transmitter and Receiver Kit for Canon ?

A: As long as the 580EX is in manual you can use it to fire the Optical Cell/Slave.

Q: 5. Will it work with a Canon transmitter such as the Canon ST-E3-RT Wireless TTL flash controller and in combination with other canon flashes such as Canon 600EX-RT Speedlite Flash?

A: This monolight would use a dedicated transmitter which is the Impact Cruiser Wireless Controller for Canon Cameras B&H # IMACDCTXC.

Q: 6. Will this Impact Cruiser remote trigger Interfit lights? The LCD panel is identical and I'm hoping the wireless protocol is as well. Thanks!

A: No, the Impact Cruiser Wireless Controller for Sony Cameras cannot trigger the Interfit S1 series lights.

Q: 7. I have three Canon 600ex-rt. what iis the advantage of this Cruiser Monolight over Canon flash? is it worth replacing them with this?

A: The Cruiser monolight would give you a lot more light output and the option to use traditional light modifiers directly on it, without additional adapters in most cases.

Q: 8. Can I control this light with a Sekonic L478-DR-u?

A: Not sure, but I'm afraid not. The Sekonic L-478DR provides triggering or flash control for the entire PocketWizard wireless family. Dynalite, Lumedyne, Photogenic, and Profoto incorporate the PocketWizard standard system. AlienBees, Einstein, Elinchrom, Canon, Nikon and White Lightning flashes connected to PocketWizard ControlTL products are perfect match to the L-478DR for power control.

Q: 9. Is there a compatible receiver available for this that would enable a Canon 600rt-ex speedlite to be fired for supplemental lighting?

A: Unfortunately, there are no separate receivers offered for this system. The trigger only works with the internal receivers on the Impact Cruiser monolight.

Q: 10. The version I'm looking includes the Sony transmitter. Any chance this will still work on a Nikon or Canon camera?

A: The strobe is universal and will work with Nikon, Canon, and Sony. The transmitters are dedicated to each brand. In other words if you have a Nikon system you need the Nikon transmitter. If you have a Canon system you need the Canon transmitter. Each strobe will work with any of the three transmitters, but you need the transmitter dedicated to your camera system.