This 4 x 5.65" Tiffen ND Filter 4x5.65 2-Stopis a solid neutral density filter providing a 2-stop exposure reduction. This 0.6 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By increasing your aperture or slowing your exposure time, you are able to control the depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between two pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 5.65" / 101.6 x 143.5mm.

0.6 Optical Density    Glass Filter    ColorCore Technology    Requires 2-Stop Exposure Increase    Darkens Entire Image    Allows Reduced Shutter Speed    Allows Wider Aperture

0.6 solid ND filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.

Providing a 2-stop exposure reduction, this filter allows you to control the depth of field and convey movement more easily.

Filter does not affect the coloration of the image and is ideal for use with other filters.

Related Questions and Answers

Q: 1. is there a similar product available for RF lens?

A: We do not currently have anything similar that works with RF lenses. Additionally the current Canon RF 15-35mm Wide Angle lens is able to take front threaded filters.

Q: 2. After mixing 1:19, how long to leave the film exposed to the stop solution before fixing?

A: 30 seconds with continue agitation. I am chemist. You are neutralizing using a week acid, if your time goes some seconds over it does not have huge impact.

Q: 3. Where can I find a filter that works for Sigma 8mm fisheye lens?

A: The Sigma 8mm f/3.5 EX DG Circular Fisheye Lens accepts Kodak Wratten filters in its rear slot, which can be cut to size. https://bhpho.to/3WKAkIM

Q: 4. Can this be used to stop a D-76 developer?

A: Hi yes, , this stop bath works with kodak d-76

Q: 5. Will it fit a nikon d7500 plus a tamron 100-400?

A: The f-stop Navin Welded Camera Pouch is a touch too small for the D7500 with the Tamron 100-400mm f/4.5-6.3 Di VC USD Lens.

Q: 6. Will this fit a Nikon Z7 II with the Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S Lens attached and the lens hood reversed?

A: Yes, the F-stop Navin Welded Camera Pouch will fit the Nikon Z7 II Mirrorless Camera with the Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S Lens attached. The lens hood must be set to reverse, and the lens foot needs to be angle towards the camera hand grip. The camera and lens have a total lenght is 11''; the pouch interior lenght is 12.5''.

Q: 7. Hi, what are the inside dimensions when this pouch is fully expanded? I'm hoping the height is at least 313mm/12.25".

A: The height fully extended is 13 in / 33 cm.

Q: 8. Can this hold the Sigma 150-600mm C and a Fuji X-T2 with adapter and battery grip?

A: The f-stop Navin Welded Camera Pouch is not big enough to hold your gear.

Q: 9. After mixing the concentrate with water. What is the maximum time to be able to reuse it again?

A: The working strength is good for 7 days.

Q: 10. will Nikon Z8 with 70-200 Z series lens with TC-2X teleconverter attached fits in this pouch?

A: The Nikon Z8 Mirrorless Camera with the Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens and the Nikon Z Teleconverter TC-2x attached fits in the f-stop Navin Welded Camera Pouch.