The Arkay Stainless Steel Photo Processing Sink 30x48x6are constructed from 18 gauge type 316L stainless steel, with a 100% seamless construction.

An optional heavy gauge, charcoal grey stand & shelf as well as a choice of 5 or deluxe 10" backsplash's are available

The inside corners of these sinks have 3/4" radius coved corners leaving dirt no where to hide

The gauge of these models is thicker, more rugged, and longer lasting then other standard gauge steel sinks providing superior temperature holding ability

The Tapered look is extended to the outside of the where you'll find 1-1/2" rims an 1-1/2" radius coved outside corners

Each sink is painstakingly crafted to your exact specifications

The self-supporting sink stand also has that rounded and polished look of craftsmanship and quality.

All sinks are undercoated for sound insulation and condensation prevention

Related Questions and Answers

Q: 1. Compared to the 420B, apart from lacking a sandbag, is this also a less robust stand? I notice the maximum load is lower for the 420SNB.

A: The Manfrotto 420B, B&H # MA420B and the 420NSB are the same stand, with the latter not including the empty sandbag.

Q: 2. What is the recommended solution volume that does not cause problems due to overfill?

A: The recommended solution volume of the Stearman Press SP-445 Compact 4 x 5" Film Processing System is 16 oz.

Q: 3. Can the middle telescope section be removed when a slightly low minimum height is needed ??

A: Unfortunately, the sections of this light stand cannot easily be removed, as it would have an impact on the sturdiness of the stand.

Q: 4. What type of casters can I use for the BH# MA3399 ?

A: I am using the Manfrotto 018 (9545) castors. BH Sku=MA018. They work fine.

Q: 5. What is the latency of this device? In other words how much will the output video signal be behind the input signal from the camera?

A: Datavideo says - The theorem path delay of DVK-400's SDI IN to SDI OUT is less than 10 scan lines, but the actual delay can be 10 scan lines ~ 1 frame influenced by frame synchronizer and Genlock feature. This would be the same for INPUT and OUTPUT.

Q: 6. If I pair the DVK-400 with the TPC-700 touch-panel controller, do I still need a host computer for control?

A: Yes, when using the Datavideo 4K Real-Time Chroma Keyer with 10-Bit, 4:4:4 Video Processing with the Datavideo 7" Touch Panel Controller TPC-700 you will need a PC for initial setup. After that the TPC-700 controller would work and you would not need to have a computer connected.

Q: 7. How would it compare to Blackmagic Ultimatte 12 ?

A: They are very similar in capabilities. One thing that is worth mentioning is that Blackmagic is known for their excellent software and integration with their other products.

Q: 8. will this card work with Canon R5 8k RAW?

A: Yes, this would be compatible for your usage needs. When shooting at 8K DCI RAW video image quality, the Canon EOS R5 Mirrorless Camera bitrate captures video at 2,600 Mbps (megabits per second), which would be 325 MB/sec (megabytes per second). According to Hoodman, the Hoodman 512GB Steel CFexpress Memory Card has a sustained minimum write speed of 500 MB/sec, which is more than fast enough for the 325 MB/sec data stream from the Canon EOS R5 Mirrorless Digital Camera for 8K RAW video recording usage needs.

Q: 9. Will this tripod be a suitable replacement tripod for a Celestron CG-4? If not, which tripods are suitable even if overkill?

A: In regards to maximum weight capacity the iOptron 1.25" Stainless Steel Tripod is compatible with the iOptron 1.25" Stainless Steel Tripod. However, it is proprietary to accept the SkyHunter GoTo mount SkyGuider Pro tracking mount iPano AllView camera mount SkyTracker/SkyTracker Pro camera mount SmartEQ/SmartEQ Pro mount SmartStar/Cube mount with an M8 mounting hole SmartStar/Cube mount with a 3/8" mounting hole

Q: 10. Are the turning knobs plastic? Can't decide between this one or the Avenger and this might be the deciding factor.

A: The knobs are plastic.