This Hosa XLR Male to Female Balanced Cable 3' 20 Gaugeis a 3' long balanced 20-gauge heavy-duty professional microphone cable. It features Neutrik brand 3-pin XLR connections, and its heavy-duty wire and dual conductor design offer excellent signal transmission.

95% coverage copper braided shield

Related Questions and Answers

Q: 1. Can the RODE VXLR Pro also be used to connect an unbalanced 3.5mm mic to the Phantom-Powered XLR connector?

A: No. It would need to be a 3.5mm TRS connection microphone that requires mic plugin power to be able to work with phantom power and the Rode VXLR Pro.

Q: 2. Will it work with my Rode Rodelink filmmaker kit and my Zoom H6?

A: Yes it. will.

Q: 3. Will this work w/ Sony PXW-Z90V? I dont understand the whole power converter thing

A: Yes the Saramonic C-XLR+ will connect to a mic input on the Sony PXW-Z90V.

Q: 4. Can this allow me to use a RODE videomicGO on a SONY HXR-NX100? The Sony only has XLR inputs.

A: It should. I use it on all my cameras that have XLR inputs and it works great.

Q: 5. Can I use a Sanken COS-11D with a Zoom FX3 using this adapter?

A: Yes, a Sanken COS-11D Lavalier Microphone that has a 3.5mm TRS connector can be used with the Zoom F3 Portable Field Recorder when connected with an adapter like the RODE VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter or the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). You will need to turn on phantom power on F3 to power the mic.

Q: 6. Can this be used as an adapter for PA's or DJ's desks into a XLR input on a recorder?

A: The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter is typically used to adapt microphones with 3.5mm wiring to XLR inputs, however this adapter could presumably work in the same manner with a line level 3.5mm connection from a DJ deck into a line level XLR input on a recorder.

Q: 7. Will the Lav mic came with the "Sennheiser G3" work with the "Rode VXLR PRO" when connecting to a mixer-recorder such as the MixPre ? Does it accept the screw lock from the "G3's lav" TRS connector? Thank you for the answers.

A: Yes, the Rode VXLR PRO adapter can be used with a Sennheiser lavalier microphone to enable connection to an XLR mic input on a mixer/recorder such as a Sound Devices MixPre model. The VXLR PRO has a threaded female 3.5mm TRS connector on one side to attach the mic and a male XLR connector on the other end allows the mic to be plugged into an XLR input. Additionally, the adapter converts 48V phantom power into plug-in power so you can safely provide power to the mic.

Q: 8. I bought this to use with Tascam DR-40 and Audio Technica AT8024. The input level is too low for recording even with maxed out preamp level. How do I use this combo? Is this adapter right for AT8024?

A: The Tascam DR-40 only accept mic level devices via its XLR inputs. This adapter is incorrect. To connect the AT8024 in mono to the recorder, you would require an XLR adapter such as the Kopul A-XMMF. To use the mic in stereo, you will need a stereo mini to dual XLR Y cable such as the Kopul SMYC-M2XM06 and then an additional 3.5mm stereo turnaround adapter to connect to the mic. See the Hosa Technology GMM303.

Q: 9. I'd like to connect my on cam cold-shoe shotgun mic (sennheiser, takes AAA) to audio mixer (zoom F4). Is this what I'm looking for?

A: You can use that but it isn't necessary. You can use a simpler adapter like B&H # KOAXMMF or B&H # ROVXLRB&H # ROVXLR

Q: 10. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.