The Tiffen 5x6" Chocolate Soft-Edge Graduated Filterhelps to specifically add a neutral, mellow brown coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 2 color density provides less chocolate coloration than the 3 density, but more than the 1 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

2 Density Color Graduated Filter    Chocolate Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a mellow brownish coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Looking for a case smaller than the CL-L3. Will the Nikon Z 800mm 6.3 fit in the CL-L2 with hood reversed, no camera ?

A: The Nikon NIKKOR Z 800mm f/6.3 VR S Lens fits in the Nikon CL-L2 Soft Case for 400mm, 500mm, and 600mm.

Q: 2. Where is B&H getting that this umbrella is safe for up to 1000 watts? Westcott's specifications web page for this item says the maximum is 300 watts.

A: I have seen other stores say the same thing as B&H rated at 1000 watts. My lights are 640 watt strobes and being a strobe there is no heat to speak of because the flash is so quick. My shoots will typically be around 300 hundred shots with zero issues. Continuous lights or hot lights as they are commonly called might be another thing.

Q: 3. Will this case hold the Nikon 200-500? Is it the best one for the purpose?

A: Yes it will hold your 200-500 with a camera body attached. I ordered it for my D3s and the Nikon 600 lens. I holds them and I use this case all the time.

Q: 4. Will this work for AVX mount?

A: The Celestron Soft Telescope Bag (40") BH #CETSB40 • MFR #94025 should work for the AVX mount.

Q: 5. Is this good for light stands and multiple RGB tube lights?

A: The Celestron Soft Telescope Bag (40") BH #CETSB40 • MFR #94025 can be used for light stands and other equipment.

Q: 6. Will this case accommodate Nikon 400mm FL version with the hood attached in reverse (without removing any padding inside the bag)?

A: Yes, it will fit nicely, you may have to remove 1 section of padding.

Q: 7. Will this fit the tripod and mount of an Evolution 8"?

A: This would only fit the Tripod.

Q: 8. does it fit Sony PXW-FS5M2K?

A: Yes. The PXW-FS5M2K has a 3.5 inch screen and this is sized for 3.5 inch screens.

Q: 9. Will this fit the gr iii x?

A: Yes, the Ricoh GC-11 is compatible with the Ricoh GR IIIX.

Q: 10. Will this be big enough for Celestron Omni 150 XLT EQ telescope ?

A: This will not work.