Da-Lite Tensioned Advantage Deluxe Electrol 16:10 Screen

Da-lite Tensioned Advantage Deluxe Electrol 16:10 Screen

Product Code: eq172628
Availability: In Stock

$18,446.40 $24,718.18

Qty

13 reviews Write a review

Description
Reviews (13)

This Tensioned Advantage Deluxe Electrol 16:10 Wide Format Motorized Projection Screen from Da-Lite has a 57.5 x 92.0" viewing area with a DA-Tex flame retardant and mildew-resistant finish.

DA-Tex is a rear screen, translucent neutral gray finish with a 1.3 Gain rating and 30° (L/R) viewing angle. It is characterized by high transmission and low reflectance values. Color rendition is true and contrast is good. This finish is especially suitable for lace and grommet screens. If the finish becomes soiled, it can be cleaned with mild soap and water. Tensioning on each side of the seamless fabric assures a flat, undistorted surface that eliminates any chance of a skewed image.

One of the major advantages of this screen is that the fabric roller can either be factory installed or at your chosen location after the ceiling recessed, UL Plenum rated extruded aluminum white housing has been roughed in. The enables you to finish the initial installation but choose your screen finish at a later date.

The screen includes two motors; one for the ceiling door and one for the fabric. The interior roller features a quick reversal motor, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, and an electric brake to prevent coasting when the screen is stopped at a chosen length. The built-in Low Voltage Control controls up/down and stop functions using the included 12VDC three-position switch that can be wall mounted where convenient. It can also be operated from an optional radio frequency, infrared or auxiliary transmitter.

Ceiling Recessed 109" Diagonal 16:10 Aspect Ratio Install Case First, Roller at Later Date Built-in Low Voltage Control Rear Projection

Parameters
Style	Tensioned Advantage Deluxe Electrol
Design	Motorized / Rear projection
Mount	Ceiling recessed
Finish	DA-Tex; vinyl, flame retardant and mildew-resistant
Tension Control	Tensioned
Keystone Control	No
Dimensions
Image Size	57.5 x 92.0" (146.1 x 233.7 cm)
Diagonal	109" (276.9 cm)
Format / Aspect Ratio	Wide / 16:10
Gain / Viewing Angle	1.3 / 30° (L/R)
Masking Options	None
Controls
Voltage	120VAC / 60 Hz Not more than 2.4 amp
Integrated Control	Pre-set, adjustable limit switches to automatically stop screen in the up and down positions Integrated low voltage control unit Three-position control switch
Control Options	Wireless Remote Control for LVC Radio Frequency Remote Radio Frequency Range Extender Infrared Remote Video Projector Interface Control - built-in SCB-100 RS-232 Serial Control Board - built-in NET-100 Ethernet-Serial Adapter SCB-100 RS-232 Serial Control Board - external NET-100 Ethernet-Serial Adapter
Casing
Color	White
Material	Extruded aluminum
Length	120.75" (307.0 cm)
Shipping Weight	Approx. 145.0 lb (65.8 kg)
Packaging Info
Package Weight	148 lb
Box Dimensions (LxWxH)	124 x 13 x 10"

Related Questions and Answers

Q: 1. Do you have Silver?

A: I got a silver one

Q: 2. Does this telescope come with a Tripod? if so what kind of Tripod is it, specs says No tripod?

A: The Celestron CPC Deluxe 800 HD 8" f/10 Schmidt-Cassegrain Telescope BH #CE110071 • MFR #11007-1 does not come with a tripod. Celestron Heavy Duty Tripod for CPC, Nextar GPS BH #CEHDT • MFR #93493 https://www.bhphotovideo.com/c/product/546204-REG/Celestron_93493_Heavy_Duty_Tripod_for.html

Q: 3. Is this camera great for shooting short movie for beginner? It may be enough good for shooting video?

A: I have not tried shooting any video with this camer. Sorry.

Q: 4. Does it shoot in 4K?

A: It does not, this films in HD quality only. You would need to move up to the A6100 which does offer 4K UHD Recording. https://bhpho.to/2GZJLPB

Q: 5. Ive seen on youtube that some A6000 has problem with lens not being recognized and the stuck shutter button issue. Also several users claims that camera not responding at all.Did you encounter with this kind of malfunction? Thanks in advance!

A: Not yet (I've taken less than 1000 pictures). And I hope never face those problems.

Q: 6. Is there a case for this? I have done the measurements and this will not fit inside "BH #PEIM2720B". Not unless the OTA comes off the mount. Does the OTA come off the mount?

A: No, the Celestron CPC Deluxe 800 HD 8" f/10 Cassegrain Optical Tube Assembly is not meant to come off the mount. It needs to be stored attached to the mount. To store the OTA with mount one can use the Pelican 1690 Transport Case with Foam (Black), BH #PE1690FB (https://bhpho.to/3uB9Nl1).

Q: 7. can the Celestron AutoGuider work and auto guide objects with this mount & tripod? a video said this is possible can you confirm

A: Previous autoguiding setups were complex and expensive, usually involving a separate autoguiding camera, a guidescope, and a computer. StarSense Autoguider replaces all that—so even beginners can dive head-first into the world of imaging. The StarSense module does not include a GPS function. For each observing location, you need only enter the date, time, and location (by city or by latitude and longitude) once.

Q: 8. I wanted to know if the 16-50mm and 55-210mm lens systems are equivalent to 35mm? I am transitioning from 35mm film to digital and want to maintain the same look. Any camera suggestions would also help! I am considering Ricoh Gr II as well.

A: Sony A6000 has an APS-C senson and has a 1.5 crop.I havent used film, but personally found the mirrorless cameras better than the DSLRs due to the features such as focus peaking and overall ease of use

Q: 9. Does the a6000 have a tripod mounting receptacle?

A: Yes

Q: 10. Does this item include all the factory included accessories?

A: Yes, the PILOTCINE AtomCUBE 10" RX50 RGBWW Portable Deluxe Video Light Panel would include the factory included accessories such as the power supply and barndoors.

Zack	27/09/2024
[None] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Cat5 King	23/09/2024
[None] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

petarm	15/09/2024
[124 x 13 x 10"] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Yvenson	15/09/2024
[None] I love this product, Easy to install and and look even better on the wall. 5

Gab Laughin	26/08/2024
[Tensioned] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Andreas the squint	17/08/2024
[124 x 13 x 10"] I used this screen in a small conference room and it was very simple to instal. 5

Chip	11/08/2024
[None] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Doug	16/07/2024
[Wide / 16:10] Looking forward to getting all of this stuff together 5

Rikilah	11/07/2024
[148 lb] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5