Da-Lite Tensioned Advantage Deluxe Electrol 16:10 Motorized Screen

Da-lite Tensioned Advantage Deluxe Electrol 16:10 Motorized Screen

Product Code: eq172631
Availability: In Stock

$27,960.00 $36,907.20

Qty

17 reviews Write a review

Description
Reviews (17)

This Da-Lite Tensioned Advantage Deluxe Electrol 16:10 Motorized Screenfrom Da-Lite Tensioned Advantage Deluxe Electrol 16:10 Motorized Screenhas a 65 x 104" viewing area with a Dual Vision flame retardant and mildew-resistant finish.

The benefit of Dual Vision is its ability to be used for front or rear projection. With its 0.9 Gain rating and 65° (L/R) viewing angle, it works best where ambient light is controllable. The light gray tint delivers an especially wide viewing angle with edge-to-edge sharpness and no color shift. If the finish becomes soiled, it can be cleaned with mild soap and water. Tensioning on each side of the seamless fabric assures a flat, undistorted surface that eliminates any chance of a skewed image.

One of the major advantages of this screen is that the fabric roller can either be factory installed or at your chosen location after the ceiling recessed, UL Plenum rated extruded aluminum white housing has been roughed in. The enables you to finish the initial installation but choose your screen finish at a later date.

The screen includes two motors; one for the ceiling door and one for the fabric. The interior roller features a quick reversal motor, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, and an electric brake to prevent coasting when the screen is stopped at a chosen length. The built-in Low Voltage Control controls up/down and stop functions using the included 12VDC three-position switch that can be wall mounted where convenient. It can also be operated from an optional radio frequency, infrared or auxiliary transmitter.

Ceiling Recessed 123" Diagonal 16:10 Aspect Ratio Install Case First, Roller at Later Date Built-in Low Voltage Control Front or Rear Projection

Parameters
Style	Tensioned Advantage Deluxe Electrol
Design	Motorized / Front or Rear projection
Mount	Ceiling recessed
Finish	Dual Vision; vinyl, flame retardant and mildew-resistant
Tension Control	Tensioned
Keystone Control	No
Dimensions
Image Size	65.0 x 104.0" (165.1 x 264.2 cm)
Diagonal	123" (312.4 cm)
Format / Aspect Ratio	Wide / 16:10
Gain / Viewing Angle	0.9 / 65° (L/R)
Masking Options	None
Controls
Voltage	120VAC / 60 Hz Not more than 2.4 amp
Integrated Control	Pre-set, adjustable limit switches to automatically stop screen in the up and down positions Integrated Low Voltage Control unit Three-position control switch
Control Options	Wireless Remote Control for LVC Radio Frequency Remote Radio Frequency Range Extender Infrared Remote Video Projector Interface Control - built-in SCB-100 RS-232 Serial Control Board - built-in NET-100 Ethernet-Serial Adapter SCB-100 RS-232 Serial Control Board - external NET-100 Ethernet-Serial Adapter
Casing
Color	White
Material	Extruded aluminum
Length	129.25" (328 cm)
Shipping Weight	Approx. 150.0 lb (68.0 kg)
Packaging Info
Package Weight	150 lb
Box Dimensions (LxWxH)	138.5 x 13 x 10"

Related Questions and Answers

Q: 1. will the Celestron SkySync GPS Accessory (93969) work with this?

A: Yes, it will work with the Celestron CPC Deluxe 800 HD 8" f/10 Cassegrain GoTo AZ Telescope BH #CE11007K (B&H Kit) • MFR #11007

Q: 2. Does the a6000 have a tripod mounting receptacle?

A: Yes

Q: 3. Should I spend more for the A6000 or get the A5000?

A: Definately very happy with the a6000, go for the combo lense set if possible.

Q: 4. Is this camera great for shooting short movie for beginner? It may be enough good for shooting video?

A: I have not tried shooting any video with this camer. Sorry.

Q: 5. Does this telescope have an internal power source?

A: (8) AA batteries are used in the hand controller

Q: 6. can the Celestron AutoGuider work and auto guide objects with this mount & tripod? a video said this is possible can you confirm

A: Previous autoguiding setups were complex and expensive, usually involving a separate autoguiding camera, a guidescope, and a computer. StarSense Autoguider replaces all that—so even beginners can dive head-first into the world of imaging. The StarSense module does not include a GPS function. For each observing location, you need only enter the date, time, and location (by city or by latitude and longitude) once.

Q: 7. will lenses from my a330 work on a6000?

A: Your A330 uses the Minolta/Sony A mount. This camera is the Sony E mount. But there are adapters, so, yes--with an adapter--you can use the lenses from your A330 on it. The Sony LA-EA4 will give you autofocus on even the older Minolta lenses. The Sony LA-EA3 is used with Sony lenses that have internal motors (eg. SAM).

Q: 8. Can you charge the camera from the micro-usb while recording?

A: The Sony Alpha a6000 camera battery cannot be charged with the USB cable. The camera could be powered with AC power while recoding. You will need the Sony AC Adapter for Select Sony Cameras. Here is the link: https://bhpho.to/2TB0tyF

Q: 9. Does the a6000 have a tripod mount?

A: Yes

Q: 10. Can you use a wedge with this mount?

A: Yes, for the Celestron CPC Deluxe 800 HD 8" f/10 Cassegrain GoTo AZ Telescope one can use the Celestron HD Pro Wedge, BH #CEHDPW (https://bhpho.to/3VKv0EW).

Doug	29/09/2024
[White] Looking forward to getting all of this stuff together 5

anyonymous	13/09/2024
[None] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

Jonathan	07/09/2024
[None] This was the forth 9X12 dalite screen that we have purchased. We also have several 6X8's. We use them for PR meetings in various churches and schools around the US. Dalite screens are excellent! The newer fast fold frames are bigger and built stronger and the easy release latches work extremely well and you no longer need to fight the frame to put it together and take it apart. I often get assistance from a local person at the meeting and they are always amazed at how it all folds together and fits into the case. THe cases are much too big, I think and I have taken them and cut them down so they don't use up so much storage space. 5

petarm	02/09/2024
[Tensioned] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Winnie Lan	01/09/2024
[None] the screen is great! 5

Andreas the squint	17/08/2024
[123" (312.4 cm)] I used this screen in a small conference room and it was very simple to instal. 5

Gab Laughin	12/08/2024
[White] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Cat5 King	08/08/2024
[Wide / 16:10] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Rikilah	04/08/2024
[Wide / 16:10] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5