The Libec LX10 Tripod System with H65B Head & Spreadersupports cameras and accessories weighing up to 35 lb. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots. The legs are made from aluminum and feature three leg sections. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5". To aid in leveling your shot, a bubble level is incorporated into the head. The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 lb. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.

Supports 35 lb    Sliding Balance Plate with Safety Stop    Fixed Counterbalance System    Two-Step Pan and Tilt Drag System    +85 to -65° Tilt Range    100mm Half Ball    Ground-Level Spreader

The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.

The head incorporates a small stud at the front that prevents the balance plate from sliding out.

The included ground-level spreader prevents the tripod's legs from flying apart and is suitable for use on flat, level surfaces.

Related Questions and Answers

Q: 1. How tall is it and how does it weigh?

A: Sorry, but this tripod and battery selection is no longer available. The tripod and head are still available. See below.The maximum height is 62.2 (158cm). The combined weigh 10.6 lbs (4.8kg).

Q: 2. Does it have spiked feet under the pads? I shoot in the mountains.

A: Hello, Thank you for your inquiry and consideration. Yes they have spiked metal feet beneath the rubber caps and foot pads, pls check out the this diagram, thanks: a href= http://www.libec-global.com/s_parts/pdf/04-tripod/RT50B_Service_parts.pdf target= _blank http://www.libec-global.com/s_parts/pdf/04-tripod/RT50B_Service_parts.pdf/a

Q: 3. whats the diference midle spread o floor spread?

A: The spreader that you use with the Libec LX7 Tripod With Pan and Tilt Fluid Head and Floor Spreader is a personal preference. However, to provide more detail, ground spreaders are very stable and can go very low, making it easier to get to the desired height quickly, but they do get dirty. Also, ground spreaders will be more difficult to set up on uneven ground. Mid-level spreaders are good for uneven ground. While they are cleaner, mid-level spreaders are less stable and they require more adjustment when selecting the height and leveling your tripod legs.

Q: 4. will a manfrotto MVR901EPLA fit this?

A: Yes, the Manfrotto Pan Bar Clamp Attachment will fit onto the Libec LX7 M Tripod's pan bar.

Q: 5. What size screw is the tie down for the 75mm ball?

A: The Libec 650EX Tripod System with Mid-Level Spreader has a 65 mm ball leveler. The legs would not be compatible with 75 mm.

Q: 6. Can this handle a Panasonic UX camcorder and small teleprompter?

A: That will depend on how much the teleprompter weighs. This tripod has a 17.5 load capacity. The UX cameras weigh around 4-5 pounds, you will have another 12 pounds or so for the teleprompter with this tripod.

Q: 7. Hi! is it possible to remove the mid level spreader and use it with the floor spreader? tx!

A: Yes you may. The Libec SP-2B is the correct floor level spreader to consider, thanks.

Q: 8. Is this head compatible with manfrotto 501 quick-release plates?

A: Libec 650EX does use a quick release system that is similar to Manfrotto 501PL. One can swap the plates between Libec and Manfrotto heads that use Manfrotto 501PL.

Q: 9. Does this come with a quick-release camcorder plate? (i.e. for an AG-UX90)

A: Yes, this comes with a quick release plate. Most tripods with greater than 2 lb capacity have them.

Q: 10. Where is made in?

A: According to the information we have, our current inventory's Country of Origin is Taiwan. Please be aware this can change over the product's production life without notice.