Samson Mixpad Mxp144Fx 14-Channel Mixer With Usb

Samson Mixpad Mxp144fx 14-channel Mixer With Usb

Product Code: eq17285
Availability: In Stock

$959.97 $1,535.95

Qty

9 reviews Write a review

Description
Reviews (9)

The MixPad MXP144FX 14-Channel Analog Stereo Mixer from Samson offers six MDR mic preamps with four of the channels equipped with single-knob compressors. All channels on the MXP144FX are controlled via precision 60mm faders and feature a 3-band EQ, Gain trim, high pass filter and mute switch. In addition, each channel on the MXP144FX has a pre-fader Aux send for your monitor mix and a post-fader Aux send for introducing external effects.

With 100 24-bit, low-noise digital effects, the MXP144FX mixer offers a studio-inspired effects processor to give your mixes a professional touch. The mixer also feature a high-integrity, bi-directional USB connection for recording a mix to your favorite DAW or integrating digital music files from your computer into a project.

The mixer features selectable 48V phantom power allowing you to mix in the warm, natural response of your favorite condenser microphones. Further catered to live performance, the MixPad includes brightly colored knobs, as well as 8-segment LED level metering for safe and efficient operation in dark environments.

Parameters
Frequency Response	Trim @ Min, unity gain ± 3 dB Mic to Main: 20Hz to 30 kHz Line to Main: 20 Hz to 30 kHz Aux Return to Main: 20 Hz to 30 kHz Line to Aux Send: 20 Hz to 30 kHz
THD	Trim @ Min, +4 dBu output, unity gain, 1 kHz w/30 kHz LPF Mic/Line to Main (Mono Ch): <0.03 % Line to Main (Stereo Ch): <0.03 % Line to Aux Send: <0.03 %
Equivalent Input Noise	"A" filter on, input shorted Mic (Trim @ Min, Fader set "0"): < -90 dB 20 Hz to 30 kHz A-weighted Line (Trim @ Min, Fader set "0"): < -90 dB 20 Hz to 30 kHz A-weighted
Maximum Voltage Gain	Mic to Main (bal): 70 dB Line to Main (bal) (Mono Ch): 43 dB Line/Tape to Main (Stereo Ch): 33 dB Aux Return to Main: 25 dB Mic to Aux Send: 75 dB Line to Aux Send (Stereo Ch): 30 dB
Residual Noise	30 kHz LPF, all control Min Main (All fader min): -100 dBu A-weighted Aux Send (All fader min): -105 dBu A-weighted
Crosstalk	at 1 kHz w/ 30 kHz LPF Ch vs. Ch (Trim @ min, Fader set 0) >75 dB A-weighted Input vs. Output: >60 dB A-weighted
Monaural/Stereo Input Peak Indicator	Mic (Mono Ch): +16 dBu Line (Stereo Ch): +16 dBu
Headphone Output	+20 dBu at 600 Ω load
Maximum Input Level	1 kHz, ± 3 dB Mic Input (Mono Ch): +16 dBu Line Input (Mono Ch): +40 dBu
Input Equalization	± 3 dB High: ±15 dBu Mid: ±15 dBu Low: ±15 dBu
USB	USB 2.0 +5 VDC 0.5 A max, USB A-Type Female
DSP Effects	100 presets
Phantom Power	48 V ±3 V
Power Requirements	100 to 240 VAC, 50 to 60 Hz
Fuse	T1.6A AL250 V
Power Consumption	<48 W
Dimensions	15.3 x 14.5 x 3.9" (391 x 370 x 100 mm)
Weight	8.3 lb (3.8 kg)

Low-noise, high-headroom analog mixer

Six Class A MDR (Maximum Dynamic Range) mic preamps

Four stereo channels with multiple input options (1/4" and RCA)

Four TRS inserts for external signal processing

3-band active EQ

100 24-bit, low-noise digital effects

High-integrity, bi-directional USB interface

High-quality, precision 60mm faders

Four single-knob studio-quality compressors

Pre-fader Aux send for monitor mix

Post-fader Aux Send for external effects

All mic channels equipped with input Gain and high pass filters

48 V phantom power for condenser microphones

Multiple outputs: Main Mix, Mix 2, Phones and Tape

XLR and 1/4" Main Mix outputs

USB and tape inputs assignable to Main Mix or Mix 2/Phones outputs

Related Questions and Answers

Q: 1. Can the xlr outputs and the rca master output be used at the same time?

A: Hi! Happy to help! yes, both outputs can be used together.

Q: 2. How much gain is available with this mixer?

A: The CAD MXU2 2-Channel Analog Mixer with USB can provide approximately 28dB of gain.

Q: 3. In which channel is mic 1?

A: Mic 1 is not part of the audio input channels 1-4.

Q: 4. does this unit come with euroblock connectors included?

A: Yes it does. It comes with 4 - Balanced via Euroblock connectors, 2 - Mic / Stereo Inputs via Euroblock connectors and 2 - Stereo Inputs RCA Type via Euroblock connector, see manual for wiring configuration.

Q: 5. Built-in effects?

A: No

Q: 6. Vale para 220 v????????

A: You will need to use a step-up transformer to use the M6 USB on a 220V current.

Q: 7. Can I use this mixer for hybrid zoom meeting calls. I have in person particpants with mics and then external participants on the zoom. I need to be able to receive and send audio?

A: Yes, the Allen & Heath ZED-14 Compact 14-Channel Analog Mixer with USB Connection can be used for hybrid Zoom meetings with participants in the same location and over Zoom. The mixer has a built-in USB audio interface that is capable of sending a stereo signal into a computer as well as sending audio from the computer back to the mixer.

Q: 8. Is this device good for 220 ACV

A: You will need to use a step-up transformer to use the M6 USB on a 220V current.

Q: 9. does it have direct outputs?

A: Yes. Changeable Mic to line

Q: 10. hi! how do I lower the sound from the computer through the usb on the mixer to use the mic with low music and high mic volume?

A: Hello, Thank you for contacting Samson Technologies. We would like to assist you better and learn what configuration you are looking to accomplish. Please email us at info@samsontech.com and we can assist you through some different options. If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Douglas	22/09/2024
[T1.6A AL250 V] I had searched the internet for several hours trying to find a simple half rack Bluetooth receiver, to come up with just really this one option. I really enjoy the addition of the 3.5mm aux input and USB power on the front. It works well to charge a phone, but doesn't have the voltage to charge an iPad. B&H has the item as the SM4, but the model that was shipped is the latest model, the SM4U, which includes a USB-C port on the back of the unit for USB audio playback. It has other features, like a mic channel that I probably won't use in my setup, but I could see that being really useful for a different application! 5

JR	06/09/2024
[48 V ±3 V] We've been using this in the church for 4 mos.it is dead quiet, no pop when you unplug instrument cable and easy to use. We had the 2nd generation 1402VLZ2 using it for 17 yrs with no problem and lost it. So without thinking twice we replace it with this new 4th generation 1402VLZ4. 5

Eric	28/08/2024
[100 presets] This mixer has been improved time and again by Mackie. I had the original VLZ model, and it finally died after 20 years of use and neglect. This new model sounds so much better, with much cleaner preamps and improved action on all the pots and faders. It's a workhorse! 5

Sound Scientist	28/07/2024
[T1.6A AL250 V] Was unable to locate this equipment in Canada.Found it on B&H's website.... Also; comparably priced. 5

Trent	23/07/2024
[T1.6A AL250 V] This board is perfect for studio or PAC use. It has no ghost signal and works as expected. 5

Drew	26/06/2024
[8.3 lb (3.8 kg)] Great job 5

Garry	23/06/2024
[48 V ±3 V] Serious podcasters will LOVE this mixer for its ease of use and quality of construction! Great value for the dollar! Highly recommend Mackie products! 5

Eduardo	08/05/2024
[8.3 lb (3.8 kg)] very good 5

CAS Sildom	30/11/-0001
[48 V ±3 V] We use this mixer for radio production. It works fine, just like the expensive gear that professional radio stations have. 5