Tiffen 4x5.65" WW IR Polarizer Camera Filterprovides color and contrast enhancement by removing glare and hot spots on faces and improves detail, definition and color saturation.

2 filters-in-one (IR + POLA), reducing multiple surfaces and potential reflection from stacked filters

Designed for digital cameras with CMOS and CCD sensors with heightened response to the Red channel

Absorbs pollution in the Far Red (visible), Near Infrared and Far Red wavelengths

IR absorbing component is proportionate to the ND value

Removes unwanted reflections from non-metallic surfaces such as water or glass

Saturates colors providing better contrast without affecting the overall color balance

Eliminates ultraviolet rays to remove haze from outdoor shots

Ideal for lightweight or clip-on matte boxes

Related Questions and Answers

Q: 1. The directions for the adapter say it has to be removed from the camera before I can change lenses. Why? It seems that it would be easier to leave the adapter on the camera and just change the lens attached to the adapter.

A: We recommend always following manufacturer's instructions, even when their reasoning might not be clear.

Q: 2. Will this work with the Pentax PF-65 ED II ?

A: No, it will not

Q: 3. is the 19.7x13.6 the actual size of the light panel or does that size include the mounting yoke?

A: The yoke and barndoors are included in the dimensions given

Q: 4. The specs claim the total weight of the light is 10 lb. Is that including the detachable AC power adapter?? If not, what is the weight of the power adapter itself?

A: 10lbs is the manufacturer spec for the lights weight.

Q: 5. I have a leica 82 shooting scope is there a adapter to use a straight eyepiece as opposed to the angled I own.?

A: Unfortunately there is not. The part of the body of the scope where the eyepiece attaches is actually an elbow that turns up. The body of the straight scope is exactly that straight. Two different body styles.

Q: 6. It says there are three 4x5.65 filters but it also mentions an ultra circular polarizing filter. I only see 3 square filters in the photo. Does this kit include a circular polarizing filter?

A: The filter on the right is a polarizing filter and rotates in a filter holder to achieve the polarizing effect.

Q: 7. Will this work with the apo televid 77 straight body scope?

A: NO, this eyepiece couples to the newer model Leica Televid 82 only... It will NOT couple to the older model Leica Televid 77, straight OR angled.

Q: 8. This says 4 x 5.6 as opposed to 4 x 5.65 Can you tell me the difference?Will these filters fit in my RedRock Micro okay?

A: The filters are 4x5.65 as we do not manufacture 4x5.6. This is just a mislabel by B&H.

Q: 9. Will this work in a regular dobsonian reflector?

A: No it will not. The Leica eyepiece requires a bayonet mount. Your scope takes an eyepiece with a diameter of 1.25" Any of these should work. https://bhpho.to/2OqgDG0

Q: 10. I have a TCSL 0618 5MP lense that I need to use a polarized lens on it. will the Tamron PL polarizer filter for CCTV CS/c mount work on it?

A: I believe the 0618 has a 30mm screw thread and the tamron filter is 25.5.