The Lithium-ion Pure Sine Wave Inverter Systemallows you to take your studio strobes on the road or off the road without electricity and without noisy generators or bulky old-style inverters. Weighing in at only 3.5 lb including its battery, the Ion measures only 7.5 x 4.4 x 3.3" but is able to deliver hundreds or even thousands of full power flashes depending on the flash head in use. For example, Photogenic's 1,000W/s PL1000DR gets 300 full power flashes on a fully charged battery while their AKC160 will get a whopping 2,050 flashes from the same battery. Of course, you can double or triple your capacity by simply purchasing extra batteries which can be charged apart from the inverter. Extra chargers are available to charge more than 1 battery concurrently.

Convenience features include a USB port to power computers and other electronic devices and an LED "fuel gauge" that allows you to check on remaining power at a glance. The system includes the ION Inverter, battery, charger, light stand clamp and strap.

Note: flash capacity specs are based on Photogenic flash heads but other brands of flash heads may be used with the inverter. Power input is 100 to 265VAC, 50/60Hz but output is 120V only.

p>

For complete specs on the items included in this system please click on the links below:

ION Inverter Module

ION Battery

ION Charger

ION Multi-Clamp

ION Strap

Compact, Lightweight and Portable    Compatible with Most Monolights    Multi-voltage Charging, 120V Output    Fast Recharging    300 - 2,050 Full Power Flashes    Standard USB Port    LED Power Monitor    Dual 3-Prong AC Outlets    May be Used with Other Brand Heads

Related Questions and Answers

Q: 1. What is the typical time to charge the unit so it has a 100% charge

A: I only had it for a week, then returned it. Charged it twice. Took about 3-4 hrs. My problem was it didn't give nearly the amount of flashes that they advertised. Maybe it was the units I was using it with, photogenic 1250s. I don't know. Hope this helps.

Q: 2. do these work with Broncolor Siros 800s ?

A: This is not capable of keeping up with the Siros 800s recycle speed.

Q: 3. Can you tell me the length of the warranty for the inverter and battery? Thanks youGeorge Macaluso

A: The inverter has a limited two year warranty, and the battery itself has a limited 90 day warranty.

Q: 4. How does this perform with the Profoto D1 or D2 monolights? Will it maintain the same recycle speeds as if the light were plugging in?

A: I have other mono lights, but I have not noticed any difference in recycle time. The inverter is providing a portable electric outlet for you. From that standpoint, it is really the same as if it were plugged into a wall.

Q: 5. Will this work with a Godox DP800iii studio strobe?

A: Yes, the Photogenic Ion Lithium-ion Pure Sine Wave Inverter System can handle the power of a Godox DP800III.

Q: 6. will this work with a norman d12 pack?

A: This pack is not rated for 1200 watts , it will work at half power

Q: 7. Is this compatible with two, sk 400 godox monolight ?

A: Yes.I am using photogenic1250 two of them on location 500w not full power.Modeling light switch off.First bought in april 2013,second one bought in may 2015.At reception make it wireless on 3 wheel light stand.easy to move around.ION photogenic are good for two SK400 moonlight Godox.

Q: 8. Is this battery pack compatible with Impact VC-500WL 2-500Ws Monolight?

A: Yes.I am currently using Photogenic power light 1250 two of them are 500w .Make sure modelling light in off position.

Q: 9. Is this battery compatible with Paul C. Buff whitelighting 1600?

A: think it will work with anything that plugs into a wall outlet!

Q: 10. Hi. How does it connect to each light? Are there a series of cords available that plug into the battery and the lights? Thank you.

A: Plug the cord that comes with light in. It is a standard grounded plug. Buy a spare battery incase you have a very long assignment. I have never had the battery run out of power. I use photogenic lights too. Great well built products