The magenta, orange, green Daisy 2" Camera Strap from Souldier is fully adjustable from 36 to 63" at four points-two on the strap body and two on the ends of the black webbing that back threads to your camera's strap lug. The strap is made from a cotton/polyester front fabric blend and recycled seat belt backing material. It includes all silver hardware. The strap can be worn either cross body style or over your shoulder. The Daisy 2" Camera Strap is handmade in the USA and backed by Souldier's limited lifetime warranty against defects.

Strap Width: 2.0"    Adjustable Length: 36 to 63"    Recycled Seat Belt Backing Material    Cotton/Polyester Fabric Blend    Includes Silver Hardware    Adjustable at Four Points    Two Slides on Strap, Two on Webbing    Attachment Loop Connects to Camera Lug    Wear Cross Body or Over the Shoulder    Handmade in the USA

Related Questions and Answers

Q: 1. How compatible is this rig with Canon XA40 cameras? Would love the follow focus to work properly

A: This rig will be able to handle a smaller camcorder like the Canon XA40. In general the follow focus would be meant for a DSLR lens, but you could still put the included Lens Gear Belt around the XA40's focus ring.

Q: 2. Will this rig be compatible with the canon xa10 camcorder

A: Yes, the Ivation Rig System for DSLR or Video Camera is compatible with the Canon XA10 camcorder.

Q: 3. Does this model support Sony NX-FS100U? Body + Lens + Microphone + Battery = 10lbs. So my question essentially is what is the weight bearing load for this rig?

A: An exact load capacity is not listed for this system. It could work with an FS100 rig as you described it, but it is really geared a bit more towards DSLR systems and may not work very well. We would not recommend this for an FS100. Instead you could look at building up a rig around the Revo SR-1500, which is can support larger cameras as it has a 30 pound load capacity. B&H # RESR1500 - https://bhpho.to/2gVTR4R

Q: 4. Will this fit into a Domke F-6 (Little Bit Smaller) bag? The published dimensions of this are just a bit bigger than the bag's published internal size.

A: No, too big.

Q: 5. Would this fit a Domke F1X Little Bit Bigger bag? - Would 2 of these fit side by side in the F1X?

A: Yes, it will fit the F1X. Fully expanded, it takes up 3/4 of the interior of the bag. (It was designed to fit the F2 bag.) This is basically a cloth liner with thin (5mm) closed-cell foam inserted between the cloth walls. The bottom is not padded--just two pieces of cloth. The walls have foam inserted to them. The outer walls are not sewn closed on the bottom edge, so you can remove the foam, so, physically, it's possible to fit two of these in an F1X by removing the foam inserts and folding the cloth over itself--not a good idea. Personally, think there are more useful inserts than this one or, instead of this insert, use Domke wraps. My insert preference is the J-Series Main Compartment Insert, Item #720-2JM. You can fit two 720-2JMs side-by-side in a F1X bag. The interior dividers are reconfigurable and removable. Hope this helps your decision.

Q: 6. Does it have a tripod mount?

A: Yes, there are four holes for the tripod quick releases plate's screws

Q: 7. Does the matte box accept filters?

A: No, the mattebox does not hold filters.

Q: 8. Will this work with Cannon Rebel Series and 18-55mm Lens?

A: Yeah, it's adjustable to fit most dslr bodies and lenses. That combination will defimotely fit.

Q: 9. Will this insert fit the Dome F2 original bag?

A: Yes, it will fit. The Domke 720-250D Digital SLR Camera Insert is designed to fit any Domke bag that has a standard 4-compartment insert.

Q: 10. Will this insert add any rigidity to the F2 bag? My F2 is a little too "floppy".

A: From personal experience, the dividers add very little to the rigidity of the bag, but make it very lightweight and easy to travel with. There is adequate protection for most cameras and lenses as long as I am not too rough with my gear. Going along with some of the other answers to this question, the underneath/external side of the Domke dividers have pockets where the foam is inserted. You might want to consider adding firmer/more rigid material (such as cardboard) on top of the foam just to add even more rigidity.