Cat5E 350 Mhz Cable 100Ft Orange

Cat5e 350 Mhz Cable 100ft Orange

Product Code: eq172927
Availability: In Stock

$86.37 $107.10

Qty

12 reviews Write a review

Description
Reviews (12)

The CAT5e 350 MHz Cable 100ft Orangeis used in enhanced Category 5 high-speed cabling to distribute data, voice, and video to meet the requirements of advanced fast Ethernet and gigabit computer networks. This cable is 100 feet long and will handle bandwidth-intensive applications of up to 350 MHz. Meeting Cat 5e TIA / EIA standards, it offers lower impedance and structural return loss (SRL) when compared to a standard 100 MHz cable. To keep Near-End Crosstalk levels to a minimum, Comprehensive has designed this cable with a shortened body plug without a boot. Furthermore, it has a orange PVC jacket so you can color code your network installation.

Gold-Plated RJ-45 Connectors 350 MHz Transmission Speed Exceeds Category 5e Specifications Reduced Near-End Crosstalk PVC Jacket RoHS Compliant

Key Specs
Cable Length	100' / 30.5 m
Ethernet Standards	Cat 5e
Connector 1	RJ45 Male
Connector 2	RJ45 Male
General
Cable Length	100' / 30.5 m
Ethernet Standards	Cat 5e
Connector 1	RJ45 Male
Connector 2	RJ45 Male
Electrical
Bandwidth Rating	100 MHz
Conductor DC Resistance	0.027 Ohms/ft (Up to 3280' / 1000 m)
Physical
Cable Configuration	Stranded
Pin Assignment	T568B
Boot Type	No
Outer Diameter	0.2" / 5.3 mm
Wire Gauge	24 AWG
Jacket Type	Polyvinyl Chloride (PVC)
Conductor	Bare Copper
Connector Material	Plastic
Contact Material	Copper
Contact Plating	Gold
Certifications	RoHS
Weight	2 lb / 0.9 kg
Packaging Info
Package Weight	2.05 lb
Box Dimensions (LxWxH)	8.6 x 7.4 x 2"

Connector: 50 µ gold-plated RJ-45 male to male

Conductor: 4-pair 24 AWG stranded copper

Jacket: PVC

Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token, Ring (IEEE 802.5); 100 VG-Any LAN, and 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM

Designed for network adapters, hubs, switches, routers, DSL / cable modems, patch panels, and twisted-pair applications

Exceeds Category 5e specifications

Wired: TSB 568B (AT&T 258A)

Certifications: TIA / EIA

Related Questions and Answers

Q: 1. Can the cold shoe be removed?

A: Yes, just held in by a screw.

Q: 2. Does this cable support 60W Power delivery?

A: No, the Tether Tools TetherPro USB Type-C Male to USB 3.0 Type-A Male Cable (15', Orange) BH #TECUC3215ORG does not support 60W PD.

Q: 3. What is the difference between this and say a $10 alternative?

A: Tether Tools are built for data transfer. They are thicker heavier cables. They are shielded and plated for optimal data transmission.

Q: 4. Is the cold shoe mount included with the Stroboframe?

A: Yes, the Stroboframe Quick Flip 350 Bracket includes the cold shoe mount in the box.

Q: 5. Will work with Canon 5D Mark3?

A: No, the Canon 5D Mark 3 uses the a href= https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html?sts=pi target= _blank https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html?sts=pi/a

Q: 6. Will this work for a Sony A37 camera?

A: The position of the lower 1/4-20 screw (standard tripod thread) is adjustable; for a very large camera it can be moved to the left. There has to be a way for the camera to operate a remote flash. I and Brian L use a hot shoe flash cable . I bought one from B&H. The flash may be mounted to the bracket via the included accessory shoe mount or via the 1/4-20 screw on top that holds that mount.

Q: 7. will this work with the Pentax K1mkII

A: We're afraid not. This cable is not compatible with the K1 Mark II. Instead you will need the Tether Tools TetherPro USB 2.0 A Male to Micro-B 5-Pin Cable (15', Orange), B&H # TECU5430ORG. Proper Option for K1 Mark II - https://bhpho.to/2gLt9hX

Q: 8. Is there an alternative to this that I can use to update the firmware in my Tamron 28-75 G2 andnmy 70-180 G2?

A: It looks like the Tamron CC-350 USB-C Lens Utility Connection Cable (4.9') is just a USB 2.0 cable with USB-C jacks. B&H # PEUSB5CMCM6 should be a suitable replacement.

Q: 9. Can you use this bracket with a Nikon D90 or D7000 with a battery pack attached. Will it be too crowded or not fit properly? Does this unit allow me to use my SB 600 or SB 400 flash units . Do I need an adapter to attach the SB 400. Curly cord to hot shoe? Can you suggest?

A: No; as stated in the Overview of the Stroboframe Quick Flip 350 Bracket, the Quick Flip 350 accepts all DSLR cameras or 35mm cameras except those with large, accessory battery packs or motor drives. If you need a taller bracket, I would recommend purchasing the Custom Brackets CB Digital-T Flash Rotating Camera Bracket, B&H # CUCBDT. You can purchase the Vello TTL-Off-Camera Flash Cord for Nikon SLR - 1.5' (0.5 m), B&H # VEOCSN15, to attach your flash onto the top of your flash bracket.

Q: 10. will this work with a Nikon D3500?

A: No, this is the correct kit for the D3500: https://www.bhphotovideo.com/c/product/1274887-REG/tether_tools_btk51_starter_tethering_kit_with.html

Elye Mittelman	08/09/2024
[2.05 lb] Works Great 5

Stacey	22/08/2024
[Plastic] Works as intended. 5

Eduardo	06/08/2024
[Stranded] Very good 5

Eduardo	03/08/2024
[Stranded] This product is very good 5

Sullivan	01/08/2024
[RJ45 Male] Reworked my office - B&H cables are reliable at a low cost. What's not to like! 5

epamike	28/07/2024
[Bare Copper] Helps let all users in the room connect by having cables of different lengths 5

Rigs	08/07/2024
[100 MHz] Short Ethernet cable that works. 5

Mike	16/06/2024
[RJ45 Male] I ran this along with a coax through a tech tube from above my fireplace place down the side to the jacks. I plugged it in in and I have connectivity. Not much more to it than that. 5