The CAT5e 350 MHz Cable 1' Orangeis used in enhanced Category 5 high-speed cabling to distribute data, voice, and video to meet the requirements of advanced fast Ethernet and gigabit computer networks. This cable is 1 foot long and will handle bandwidth-intensive applications of up to 350 MHz. Meeting Cat 5e TIA / EIA standards, it offers lower impedance and structural return loss (SRL) when compared to a standard 100 MHz cable. To keep Near-End Crosstalk levels to a minimum, Comprehensive has designed this cable with a shortened body plug without a boot. Furthermore, it has a orange PVC jacket so you can color code your network installation.

Gold-Plated RJ-45 Connectors    350 MHz Transmission Speed    Exceeds Category 5e Specifications    Reduced Near-End Crosstalk    PVC Jacket    RoHS Compliant

Connector: 50 µ gold-plated RJ-45 male to male

Conductor: 4-pair 24 AWG stranded copper

Jacket: PVC

Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token, Ring (IEEE 802.5); 100 VG-Any LAN, and 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM

Designed for network adapters, hubs, switches, routers, DSL / cable modems, patch panels, and twisted-pair applications

Exceeds Category 5e specifications

Wired: TSB 568B (AT&T 258A)

Certifications: TIA / EIA

Related Questions and Answers

Q: 1. will this work with Nikon z6?

A: No this would not work with the Nikon Z6

Q: 2. Will this cord work with a Nikon 7200?

A: Yes, the TetherPro USB 2.0 to Mini-B 8-Pin cable, is the correct cable for a Nikon D7200.

Q: 3. Would this maintain the same speed if you used a UsbType B - USB C adapter for the computer side? Using with a Sony A7rIII

A: The Tether Tools TetherPro USB Type-C Male to USB 3.0 Type-B Male Cable (15', Black), B&H # TECUC3415BLK, supports up to USB 3.0 (5Gbps) speeds. If the adapter in question is also USB 3.0 capable, it would support the same speeds.

Q: 4. Will work with Canon 5D Mark3?

A: No, the Canon 5D Mark 3 uses the a href= https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html?sts=pi target= _blank https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html?sts=pi/a

Q: 5. Are there USBC tether cables for Nikon d750?

A: This Tether Tools TetherPro USB Type-C Male to USB 3.0 Type-A Male Cable (15', Orange), would not work with the Nikon D750. You would need the following BH #TECUC2615ORG • MFR #CUC2615-ORG

Q: 6. Is there an alternative to this that I can use to update the firmware in my Tamron 28-75 G2 andnmy 70-180 G2?

A: It looks like the Tamron CC-350 USB-C Lens Utility Connection Cable (4.9') is just a USB 2.0 cable with USB-C jacks. B&H # PEUSB5CMCM6 should be a suitable replacement.

Q: 7. Will the USB-C end fit through the USB clip provided with the Nikon Z6ii?

A: Yes this cable can work with the HDMI/USB clip provided with the Nikon Z6 II.

Q: 8. Will this cable work with a Nikon D750?

A: Definitely will. I bought one to work with my D750 and it works perfectly.

Q: 9. will this work with Blue Yeti microphone?

A: Tether Tools TetherPro cables are designed for large file transfer but not for power supply. If the microphone requires power supply from the USB cable, I cannot guarantee that a TetherPro cable will yield the results you are looking for.

Q: 10. will it work on my h5d 50c ?

A: Based on information on the Hasselblad H5D-50c, it uses Firewire 800 and not USB Type-B. This cable is not compatible with your camera.