The black SF6-CPT-FF 6" Poke-Thru with Cover and Sub-Plate Set from FSR is a complete SmartFit fire rated floor box assembly.The Furniture Feed series Poke-Thru includes a 6" floor fitting, 2" conduit fitting for data and AV, a 3/4" conduit fitting for power, a Furniture Feed cover style assembly, and a junction box. This Poke-Thru cover has two holes to "feed" the cables through, and up into a piece of furniture, such as a table leg, etc.

The SmartFit series features recessed mounting bracketry to accommodate a wide assortment of power, data and audio video connection options.

All Fire-Rated Poke-Thrus are Buy American compliant.

Furniture Feed Cover Style Design    Fire-Resistant for 2-Hours    ADA Compliant Flange Height    Power Wiring Junction Box Included    Cover Loaded Rate at 1000 lb    ULC and cULus Rated    Buy American Compliant

2-Hour fire rating

Power wiring junction box included

Drop down cable access doors to reduce trip hazards

NEMA WD6 device spacing

ULC and cULus rated

Related Questions and Answers

Q: 1. The text says it "puts the keyboard at the perfect height." What exactly is this height? From the floor to the top surface of the white keys?

A: The tier height is 26.06"

Q: 2. I will be installing this item in a wood floor, can the wood be attached to the cover?If so, howI will I access the outlet?

A: This box is designed for use with carpeting. Please contact FSR directly for help with hardwood flooring:FSR:Tel: 800-332-3771Website: a href= http://www.fsrinc.com/ target= _blank http://www.fsrinc.com//a

Q: 3. Can this cable be used with a Logitech MeetUP 2 conference camera?

A: The FSR USB-C 3.2 Gen 2 Digital Ribbon Cable (32.8'), B&H # FSDRC3110M is compatible with the Logitech MeetUp 2.

Q: 4. would this work with 3G/6G/12G Sdi inputs without quality dropping? would i lose the audio signal that comes embeded?

A: This Technec Patchbay is Composite Video only, it will not accept an SDI signal of any kind. We do have some 3G-SDI Patchbays available that you could look in to. For a 4k signal passed through 6G-SDI we have the Blackmagic Design Smart Videohub 12x12. Blackmagic also makes a 40x40 Smarthub that accepts a 12G-SDI signal. Audio will be embedded through any of these solutions.

Q: 5. Can these strips be used for mounting 13" x 19" prints?

A: Yes, you can use the Lineco "See Thru" Mounting Strips - Pack of 60 to mount a 13" x 19" print.

Q: 6. Does the mentioned plastic strip go under or over the photo print? I have used positionable mounting adhesive in the past, are ?

A: When using the Lineco "See Thru" Mounting Strips, the plastic strips will go above, below, and on the sides of the photo print in order to cradle it so it is ready to be framed.

Q: 7. Is this connector Size D?

A: Yes, it fits a standard, D size panel cutout, same as an XLR connector.

Q: 8. There are two sides of adhesive - does it stick to the mat and mat board?

A: You apply these strips to a backing board with their adhesive tape -- for your purposes the adhesive tape is 1-sided, being already attached to the firm plastic strip.The adhesive doesn't cover the full width of the plastic strip; it leaves perhaps 1/5 of plastic free to act as a trap for the item being mounted. There is no adhesive in direct contact with the mounted item's surface.This is ideal for use on a backing board where glass and/or matting will keep the artwork from falling out of the strip's thin rim of plastic. It wouldn't work for a large paper item which lacked a glass in front -- the paper's weight would pull it out of plastic edges, I suspect. The role of this is to prevent artwork from shifting around after it matted and framed.Note that the adhesive holding the mounting strip is outside the dimensions of the artwork: the backing board needs to be around an inch wider than the artwork to have room for the strips.

Q: 9. Does this have threaded slots on the rails or just square punchouts? Do I need nuts?

A: No, neither. The rack rails for the Gator Frameworks Elite Series Furniture Desktop 4 RU Studio Rack have round holes for the rack screws, which are included along with washers. Nuts are not required to secure the rack screws and keep the equipment mounted in the rack.

Q: 10. How do you mount this to the ceiling grid ?

A: The FSR CB-224 Series 4RU Ceiling Box from FSR BH #FSCB224 is a 2 x 2’ high-capacity ceiling box designed to fit into a standard 2 x 2’ or 2 x 4’ drop ceiling. It features a drop-down 4RU cage for easy installation and mounting of rack equipment. Cable guides for service loops are provided to allow the equipment to be connected in the down position and then to slide up into place. Manual: https://bit.ly/398XDIX The drop-down cage features pneumatic assistance to counter some of the weight of the equipment installed. The CB-224 has 6 AC outlets in the box and 1 in the room. A master power switch is accessible from the room. Note: For use with the common "T" grid drop ceiling systems only; not compatible with all drop ceiling systems.