The CAT5e 350 MHz Cable 5ft Redis used in enhanced Category 5 high-speed cabling to distribute data, voice, and video to meet the requirements of advanced fast Ethernet and gigabit computer networks. This cable is 5 feet long and will handle bandwidth-intensive applications of up to 350 MHz. Meeting Cat 5e TIA / EIA standards, it offers lower impedance and structural return loss (SRL) when compared to a standard 100 MHz cable. To keep Near-End Crosstalk levels to a minimum, Comprehensive has designed this cable with a shortened body plug without a boot. Furthermore, it has a red PVC jacket so you can color code your network installation.

Gold-Plated RJ-45 Connectors    350 MHz Transmission Speed    Exceeds Category 5e Specifications    Reduced Near-End Crosstalk    PVC Jacket    RoHS Compliant

Connector: 50 µ gold-plated RJ-45 male to male

Conductor: 4-pair 24 AWG stranded copper

Jacket: PVC

Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token, Ring (IEEE 802.5); 100 VG-Any LAN, and 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM

Designed for network adapters, hubs, switches, routers, DSL / cable modems, patch panels, and twisted-pair applications

Exceeds Category 5e specifications

Wired: TSB 568B (AT&T 258A)

Certifications: TIA / EIA

Related Questions and Answers

Q: 1. Tilta Nucleus-M R/S cable for RED Komodo?

A: We have only been informed of the Nucleus Nano cable for the Komodo - https://bhpho.to/3ffhGUv

Q: 2. Will this work with Red Ranger?

A: No, the RED Ranger is not part of the DSMC2 lineup and does not have a 7-pin port.

Q: 3. Did work with dsmc1 red cameras?

A: No, the proper cable for a Red DSMC1, for use with the Tilta Nucleus-M, would the TIRS03RD cable: https://www.bhphotovideo.com/c/product/1490881-REG/tilta_rs_03_rd_nucleus_m_red_dsmc1_run_stop.html

Q: 4. Does it goes to Red Dragon 6K?in overview was written 7-pin & Micro-B usb.

A: Depending on whether you have the DSMC1 or DSMC2 body, this is made for the DSMC1

Q: 5. This cable work with Red Komodo X? (Not the first Komodo).

A: The Tilta Nucleus-M RED DSMC2 Run/Stop Cable (27") is compatible with the RED Komodo X, so long as you use the Tilta Advanced I/O Module for RED V-RAPTOR (BH #TIESRT08IOM) as a means for the cable to interface with the cameras. See: https://bit.ly/3HMMTO3

Q: 6. Does it replace the original Red DSMC2 V-Lock Expander?

A: This battery plate can be used instead of the RED battery module with the RED base expander. You can connect this battery plate directly to the body if you do not wish to have IO ports from the expander module.

Q: 7. Just wondering if this cable will work when using the Nucleus Nano with the Nucleus M motor?

A: Yes. That is correct! From the manufacturer; "Yes that is the correct cable to use if they are using a Nucleus M Motor even if they are controlling it with the Nano Hand Wheel."

Q: 8. Does this plate communicate battery info to the brain so the user can tell how much juice the battery has left?

A: Yes.

Q: 9. Will the 4 pin cable work for the Komodo Expander Control port?

A: No, this is for the Red DSMC2 cameras. The cable for the Red Komodo is this: https://tinyurl.com/55jpwtdc

Q: 10. Hi guys, will a Canon 5D Mark IV with lens attached fit? And any possibility of a Canon 1DX with 50mm prime lens fitting?

A: The bag is adjustable it can be configured to hold the items you want.