C2G 1' Cat6 Snagless Patch Cable Blue

C2g 1' Cat6 Snagless Patch Cable Blue

Product Code: eq173023
Availability: In Stock

$14.97 $22.75

Qty

13 reviews Write a review

Description
Reviews (13)

The blue C2G 1' Cat6 Snagless Patch Cable Bluefrom C2G 1' Cat6 Snagless Patch Cable Blueis perfect for voice/data/video distribution. This cable can handle bandwidth-intensive applications. Furthermore, the cable drastically reduces both impedance and Structural Return Loss (SRL), enabling error-free transmission. It meets all Cat6 TIA/EIA-568-B-2.1and draft 9 standards.

Each individual pair is bonded together to help maintain the twist-spacing throughout the cable right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.

50µm Gold-Plated RJ-45 Connectors RoHS Compliant Snagless Design Reduces Impedance and SRL Minimizes Near-End Crosstalk Levels

Key Specs
Cable Length	1' / 0.3 m
Ethernet Standards	Cat 6
Connector 1	RJ45 Male
Connector 2	RJ45 Male
General
Cable Length	1' / 0.3 m
Ethernet Standards	Cat 6
Connector 1	RJ45 Male
Connector 2	RJ45 Male
Compatibility	10/100/1000 Base-T
Electrical
Bandwidth Rating	250 MHz
Conductor DC Resistance	0.029 Ohms/ft (Up to 328.1' / 100 m)
Capacitance	17 pF/ft
Physical
Shielded	No
Cable Configuration	Stranded
Pin Assignment	T568B
Boot Type	Snagless
Outer Diameter	0.24" / 6.2 mm
Wire Gauge	24 AWG
Jacket Type	Polyvinyl Chloride (PVC)
Conductor	Bare Copper
Contact Material	Copper
Contact Plating	Gold
Insulation	HDPE
Certifications	RoHS
Weight	0.8 oz / 22.7 g
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	6 x 3.85 x 0.65"

The cable meets all the Cat6 TIA/EIA-568-B-2.1 requirements. It drastically reduces both impedance and Structural Return Loss (SRL) to provide error-free transmission.

Related Questions and Answers

Q: 1. Will this work with the Fx3 and a PZ lens?

A: Kondor Blue 2.5mm to Micro-USB Sony VPR1 LANC-Type Remote Trigger Shutter Cable BH #KOB25MUSBLRT will work with the Sony FX3 Full-Frame Cinema Camera and a PZ lens BH #SOFX3 as well.

Q: 2. I have about eight 3rd party cables with the N3 connector and not ONE of them connect snugly enough to be reliable. How is this one?

A: No. The following cable fail after alot of plug and playing. Please review the following that offers a barrel lock PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable BH #POCMNACC • MFR #12402 https://bhpho.to/3QlEzYM

Q: 3. Is this compatible with the Sony Alpha One?

A: Yes.

Q: 4. Can this power the Lumix S5IIX without limitations?

A: Yes, the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36") would support both the S5II and S5XII cameras from Panasonic. There are no limitations that we are aware of.

Q: 5. Can you feed 12v to this using an adapter to a 12v accessory plug? It says "regulated to 8v" so I would assume its a yes?

A: Yes, the Kondor Blue 1.35/3.5mm DC to Sony NP-FZ100 Dummy Battery Cable is regulated to output at 8v from 12v sources.

Q: 6. Will this wire work with Nikon D3500 micro usb to snap port on Star Adventurer GTi for remote photography?

A: No, the Kondor Blue 2.5mm to Micro-USB Sony VPR1 LANC-Type Remote Trigger Shutter Cable does not work in the Nikon D3500. The D3500 does not have a remote shutter port. And the Nikon app with a smart device is the only way to set off the camera remotely.

Q: 7. Will Kondor Blue KB2.5 work with Sony FDR AX100?

A: Yes, the Kondor Blue 2.5mm to Micro-USB Sony VPR1 LANC-Type Remote Trigger Shutter Cable should work with the Sony FDR AX100 camcorder.

Q: 8. Will this work with the Lumix GH6? If so, how does it fit through the battery cover?

A: Yes the Kondor Blue DMW-BLK22 will work with the GH6. However, You may need to remove the battery door when using this cable.

Q: 9. Does this work with the SmallHD 702 Touch?

A: Yes, the Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 32") would work with the SmallHD 702 Touch. Also here are the SmallHD D-Tap cable options: SmallHD D-Tap to 5.5mm Male DC Barrel Power Cable (3') BH #SMCBLPWRDT36 • MFR #CBL-PWR-DTAP-BAR-36 SmallHD D-Tap to L-Series Dummy Battery Cable (32") BH #SMDTSLFB • MFR #PWR-ADP-SONYL-DTAP

Q: 10. Can I use this with a Lanparte VBP-01 battery pinch? Would I use the 12 V output or the smaller size 7.4 V output?

A: Due to the size of the barrel, the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36") would only connect to the LanParte VBP-01 V-Mount Battery Pinch's 7.4V power output.

kreepy	29/09/2024
[Stranded] great quality cable, fast shipping. 5

Guy	27/09/2024
[Snagless] [This review was collected as part of a promotion.] Great for replacing old CAT 5e cables and the have the nice release connectors (don't have break your figures to unplug these) 5

Alain	15/08/2024
[T568B] Great product.... 5

Joel	08/08/2024
[250 MHz] nothing special, but nice that B&H has the selection of different lengths, and a reliable supply chain of not-garbage. 5

ERNESTO	07/08/2024
[Stranded] the product is well made, even came with a sheet showing the test of the cable 5

anyonymous	18/07/2024
[Cat 6] These were perect for the task. I like the snagless design that they use. The releae tab is still long enough to access. 5

Justin	29/06/2024
[HDPE] [This review was collected as part of a promotion.] Very satisfied with this cable. Shipped relatively quickly. Huge improvement over my old cables and they're color coded. Transfer speed is great and I like the "snagless" design with the clips. 5

Bill	12/06/2024
[T568B] This cable seems trustworthy. As soon as I plugged it in, the connection felt firm and when I removed it, it was easy to snap off. Some cables in the past have needed coaxing, which was a concern. 5