The blue Comprehensive CAT6a Shielded Patch Cable enables 10-Gigabit data transmission over a 4-conductor 24 AWG shielded twisted-pair copper cable, allowing connection distances of up to 328.08’ (100 m). This 10' cable has been designed to meet Cat6a requirements that comprise of an electrical specification and an alien crosstalk of 500 MHz. Furthermore, Comprehensive has outfitted this cable with snagless boots and 50µ gold-plated contacts.

Gold-Plated RJ45 Connectors    550 MHz Transmission Speed    For Gigabit or 10GbE Networks    Snagless Boot to Protect Connectors    Meets Cat6a TIA/EIA 568B.2 Standards    PoE Rated    High Quality PVC Jacket

Supports IEEE 802.3af and is DTE power compliant

Provides NEXT performance beyond 600 MHz

Low-profile snagless hood is ideal for high-density switch applications

Compliant to Industry Standards: Official TIA/EIA568-B.2-10 and ISO/IEC 11801-compliant

Meets all Alien Crosstalk reduction specifications not affected by wire in adjacent cable 10 Gigabit/s transmission to 328.08' (100 m)

Performance tested to exceed 500 MHz

CAT6a Copper Patch Cable features molded connectors with snagless guards and gold-plated connector contacts that deliver maximum conductivity for high-speed data transmissions

Backward compatible with CAT5e and CAT6

PoE rated to 4 times the standard

Related Questions and Answers

Q: 1. HelloCan i charge it while it is working?for example a long timelapse or a laser trigger mode which exceeds the lifetieme of the battery - can i plug it into an external power source?

A: If the battery is not in the MIPOS you can power it directly from the USB port. But if the battery is in the MIPOS and you plug in the USB port to a power source it will not function but charge the battery.The manual for this can be read at this link http://bit.ly/1GbKjri.

Q: 2. Will this work with a Rvlvr Labs Clutch Handle and the newer Z Cam E2 flagship cameras?

A: The RVLVR Right-Side Remote Clutch Handle with LANC Camera Control (Black Walnut) does operate on the LANC protocol, as does the ZCam E2 series, so communication should pass using the VariZoom LANC Zoom Lens Control Extension Cable (10').

Q: 3. What type of laser is best for this: red, green, IR...? And what class: 2, 3b...? I'd want a laser strong enough, but without damaging the sensor.

A: According to the manufacture the color of the laser does not make any difference.There is no specific power for the laser Miops recommends. It depends on the situation. If you are outside and it is bright you most likely need a stronger one than one that is used inside.I have seen it used with a low end one from a stationary store. Again it all depends on distance and the light outside.

Q: 4. Will this trigger Nikon D3 camera ?

A: Yes, the Miops is fully compatible with the Nikon D3.

Q: 5. is this compatible with the RS-60E3 remote switch?

A: The poles of the cable are not compatible, if you would like to have more distance for your shutter release I would suggest using a wireless shutter release, Vello FreeWave Wireless Remote Shutter Release Canon Sub-Mini Connection, B&H # VERWC1.

Q: 6. I need one for Nikon D810. how to go about it? which extension cable would be needed?

A: Hi DhananjayYou would need to order the N1 cable. It is an amazing product you will really enjoy it. I would also suggest you buy a Meade Green Laser Pointer while you at i,t as you would need this to use the Laser function on this device. Good luck and happy shooting!!!

Q: 7. Does MIOPS support a programmed delay trigger?

A: Hi. I have used my MIOPS for shotting when a sound trigger.You can have a look to the MIOPS user manual that your can find at official web of miops.probably here you find a answer to your question.Regards /Jose Antonio

Q: 8. will this unit work with the northern lights?

A: The Miops Camera Trigger with Cable for Nikon 10-Pin Cameras Kit, will work as a remote trigger with a camera mounted to a tripod, using the Miops app on a smart phone or tablet. If the Northern lights appear in short bursts of Photons, (light), one can adjust the sensitivity of the Miops to be triggered by a burst of light. It is important to raise one's ISO, and to shoot time exposures on the tripod.

Q: 9. If one end goes into my Rode Videomic Go, and the other end goes into my T3i, will it still work?

A: yes, I have a Rode Videomic Pro, and a Canon 6D, the cable works well

Q: 10. Is it possible to use this product photographing humming birds at a feeder using 2 flash units and a nikon d200. setup?

A: Yes the Nikon Miopis trigger kit with the 10 pin cable will work with the 200D and and flash units. You will need a trigger and receivers for your lights to fire them. And you can use the Mobile Dongle for iOS and Android should you want to use your phone to physically trigger the camera which will then trigger the lights.