Part of Genaray LED-7100T 312 LED On-Camera LightProfessional Series of on-camera lights, the Genaray LED-7100T 312 LED On-Camera Lightoffers a bright, soft light output, with precision controls, in a compact form-factor. It's very lightweight and perfectly suitable for on-camera applications, and is just as ideal for AC-powered, continuous studio setups. It's adjustable from a warm 3200K to a cool 5600K color temperature for different shooting conditions, and features 312 LEDs that deliver up to 1400 lux brightness at 3 ft. Brightness is dimmable and flicker-free from 100-10%. Both color and brightness are adjustable by stepless, smooth-tuning dials on the rear. A magnetic, snap-on diffuser is included that will let you soften the light output and reduce contrast between different areas of your subject.

The LED-7100T can be powered by two included NP-F550 batteries, included AC adapter, or any other Sony L Series batteries. You can use a single battery or two at the same time. When you use two, they'll be drawn simultaneously and can be hot-swapped. A 4-LED indicator on the rear will let you know how much battery life is left for the total number of batteries being used. A dual battery charger, car charger, tilt and swivel ball head, and carry case are also included. The ball head features a shoe mount that can be removed to reveal a 1/4"-20 thread for mounting and adjusting the light on stands, and the carry case fits the light along with all the accessories.

Genaray Professional Series LED Light    3200-5600K Adjustable Color Temperature    Up to 1400 Lux Brightness at 3 ft    100-10% Flicker Free Brightness Dimmer    Smooth, Stepless Color/Brightness Dials    Dual Sony L Series Battery Mount    Hot-Swappable    Batteries, Charger, AC Adapter Included    Magnetic, Snap-On Diffuser Included    Ball Head and Carry Case Included

• Adjustable from 3200K to 5600K color temperature
• 312 LEDs deliver up to 1400 lux brightness at 3 ft
• Flicker-free brightness dimming from 100-10%
• Stepless, smooth-tuning color/brightness dials on the rear
• Magnetic, snap-on diffuser included
• Dual Sony L Series battery mount
• Hot-swappable
• Two NP-F550 batteries, AC adapter, charger, and car charger included
• 360° swivel / 180° tilt ball head and carry case included

Related Questions and Answers

Q: 1. Why is only half the light lit?

A: While you do not state your settings on the light fixture, I am assuming you have the unit's Kelvin color temperature set either to 3200K or to 5600K. As the Generay LED-7100T 312 LED Variable-Color On-Camera Light is a variable-color/bi-color unit, the light unit has both 156 tungsten-balanced LED bulbs and 156 daylight-balanced LED bulbs. When the unit is set to either extreme, only half the bulbs are used corresponding to your chosen setting. If you are using an intermediate setting, then certain bulbs would be dimmed while others would be brightened to achieve the desired temperature. When the light is set to approximately 4400K (the mid-point between the two temperature extremes), all lights would be lit with the same output power. This applies for the usage of most all variable-color LED light fixtures.

Q: 2. Can the Genaray 7100t be used off camera for videography?

A: Yes, the Genaray 7100t can be used off camera for videography.

Q: 3. Are there any barn doors available to fit this light?

A: Unfortunately there are no barndoors made for this light.

Q: 4. How does this compare to the BOLING Pocket LED RGB Video Light?

A: The Genaray uses external batteries and has the following dimensions: 7.5 x 4.5 x 1.8" The BOLING Pocket LED has RGB color, uses an internal battery and has the following dimensions: 5.9 x 2.8 x 0.6"

Q: 5. Where can I buy just that Shoe adapter

A: Here is a list of compatible shoe adapters: https://www.bhphotovideo.com/c/products/Accessory-Cold-Shoe-Adapters/ci/18944?filters=fct_top-mounting_3263%3A1-4in-20-male

Q: 6. what is the CRI rating?

A: The CRI for this light is 82.9

Q: 7. Which exact gels should I buy to counteract the pinkish hue of this light's tungsten setting and the red-pinkish hue of the daylight setting?

A: The light has variable color control. So you need to play with the color control on the light to get it to match what you are shooting in. But that also means you need to set your camera to the correct white balance. You should not be shooting in auto white balance.

Q: 8. I have two questions:1. Does the color temperature change when the light is dimmed?2. What adapters (if any) are needed to mount this camera at a 90 degree angle off the top of a light stand so I can hang this light directly over the top of a camcorder that has a prompter (that's why I can't use the shoe mount)?

A: The color temperature does not change based on intensity. Here is a list of adapters that will allow you to mount the light at a 90 degree angle. https://www.bhphotovideo.com/c/accessories/Conversion-Adapters-for-the-Genaray-LED-7100T/884129-REG-92392?from=detail

Q: 9. Would you buy it again? If not, recommendations?

A: Yes, the LED-7100T offers a bright, soft light output, with precision controls, in a compact form-factor. It's very lightweight and perfectly suitable for on-camera applications, and is just as ideal for AC-powered, continuous studio setups.

Q: 10. Will this work on my Panasonic AG-UX90 UHD 4K Professional Camcorder?

A: Yes, the Genaray LED-7100T uses an independent battery source and can be mounted on any camera with a cold/hot shoe.