The brushed aluminum SF8-CPT-JNC1 8" Poke-Thru with Cover and AC Set from FSR is a complete SmartFit fire rated floor box assembly. It includes an 8" floor fitting, 2 dual 20-amp pre-wired AC outlet sub plates, an EMT fitting adapter with 1" and 1.5" stubs, a cover assembly, and a junction box.

The SmartFit series features recessed mounting bracketry to accommodate a wide assortment of power, data and audio video connection options. The entire door cover swings open 180° and the two smaller cable access doors fold down for cable egress while the cover door is secure. The cover technology exceeds UL scrub water testing requirements.

All Fire-Rated Poke-Thrus are Buy American compliant.

Fire-Resistant for 2-Hours    180° Access Door Opening    ADA Compliant Flange Height    Power Wiring Junction Box Included    Complies with UL514A Scrub Water Test    Cover Loaded Rate at 1000 lb    ULC and cULus Rated    Buy American Compliant

2-Hour fire rating

Power wiring junction box included

Drop down cable access doors to reduce trip hazards

NEMA WD6 device spacing

ULC and cULus rated

Related Questions and Answers

Q: 1. I have a set of Photogenic strobes (from the early '90's). Will this work with Photogenic strobe models from that time frame?

A: If your Photogenic strobes use the standard IEC power cable and has either a 1/8 (3.5mm) miniphone sync terminal or 1/4 headphone sync terminal, then yes, the Impact PowerTrigger 16 Channel AC Transmitter and Receiver Set would be compatible for use with your strobe units.

Q: 2. How would this apply to stills work or is this only applicable to video?

A: The Cambo AC-FC500 Focus Whip Set with Focus Knob for Actus-Series Cameras is only compatible with Actus series cameras, which are used mostly for still photos.

Q: 3. Will this trigger more than one flash unit or do two receivers need to be purchased?

A: A receiver for each flash/strobe needs to be purchased.

Q: 4. What is the smallest waist size it can adjust to?

A: The SHAPE On-Set AC Belt and Pouch Tool Kits belt is adjustable for a variety of waist sizes from 36 to 48".

Q: 5. Can these strips be used for mounting 13" x 19" prints?

A: Yes, you can use the Lineco "See Thru" Mounting Strips - Pack of 60 to mount a 13" x 19" print.

Q: 6. Will this work for sony a7III ?

A: No, Sony uses a multi interface system for the shoe and remote. Click the link below to view; https://bhpho.to/2ED0aLJ

Q: 7. How many sheets, if any, of photo paper does this come with?

A: The Hahnemuhle Linen Album Cover Set (Black, 17.5 x 12.2") comes with no paper. They offer this version which comes with 20 sheets of paper: https://www.bhphotovideo.com/c/product/1366847-REG/hahnem_hle_10640751_refill_photo_rag.html

Q: 8. Does the on camera transmitter have an off switch or does it not consume battery when not in use?

A: No, the following unit does not offer a on/ off switch.

Q: 9. I purchased the 3 light kit and two additional transmitter and receiver sets. I noticed that when I use the test button, both strobes fire off fine, but when taking photographs, sometimes one of the lights will not trigger. Is anyone aware of similar issues? Using a Nikon D7100.

A: Always have backup batteries for this product because it can go at anytime. Agreed with other answer to switch up the battery and check the channel used. Also, might sound silly but make sure your wire connections/plug ins are all secure, nothing loose or adapters not fitting properly.

Q: 10. Does the mentioned plastic strip go under or over the photo print? I have used positionable mounting adhesive in the past, are ?

A: When using the Lineco "See Thru" Mounting Strips, the plastic strips will go above, below, and on the sides of the photo print in order to cradle it so it is ready to be framed.