The C2G 14 AWG Premium Universal Power Cord 6ftis a grounded power cord that will work with most PCs, scanners, printers, monitors, and other electronic devices that require a 3-pin shroud power connector. The cord is made of heavy duty 14-gauge wire with a fully molded design to ensure durability over time.

Works with most PCs, Monitors, Printers    Heavy Duty Cord Resists Wear    Grounded 3-Prong Design

Related Questions and Answers

Q: 1. Single-sided or double sided?

A: Single, the good side is slightly whiter.

Q: 2. Can this be used with 2.5mm indie pro tools sony a7s dummy battery regulated cable even though its 14.4 Volts?

A: Yes, you can use the IndiPRO Tools 69SA7 2.5mm to Sony a7s Dummy Battery Cable (24 , Regulated) cable with this POWER POD. The key word is regulated. This means the cable changes the current from 14.4 volts down to the cameras 7.2 volts operating current.

Q: 3. I've used this for the last few weeks with the black magic production camera but suddenly the camera is not recognizing power output. going off its own power. I've tried using different 2.5mm cables but the camera will no longer recognize it is there a particular 2.5mm power cable I should be using or will any 2.5mm suffice?

A: We contacted IndiPro regarding your issue and they said it may be the cable, it may be the camera. In order that your issue be resolved as expeditiously as possible, I suggest contacting IndiPro directly. 516-303-4465a href= http://www.indiproco.com target= _blank www.indiproco.com/a

Q: 4. Can it be used with Canon printers?

A: You can use this with most Canon printers that accept up to a 9mil paper yes. You may need to test a few paper settings to see which works best.

Q: 5. will this work with an Atlas Sound ECS-6RM?

A: Yes, the Lowell Manufacturing RPC-20-CD Remote Power Control can be used with the Atlas IED ECM-6RM AC Sequence Controller and Monitor.

Q: 6. What is the actual running length of the Roland PSB-1U?

A: The Roland PSB has two sections - 36in (90cm) from power plug to the brick; and 60in (150cm) from the brick to the jack - total length of 96in. I find it gives good flexibility to move around my instrument.

Q: 7. Will the system allow all battery power to go to one 7.2 Device... 4 batteries for their entire charge time? Or is it two batters per one of the two 7,2V outputs?

A: The IndiPRO Tools POWER POD creates a convenient power source for one or two devices. It allows you to conveniently use one or two batteries for each of those devices at a time. When using two batteries per device, the POWER POD allows hot swapping one battery at a time so you can keep working. Unfortunately, you cannot use all four batteries at once for one device.

Q: 8. HI Does this cord work on long exposure ?

A: The Hasselblad X1D offers very long exposures in the camera itself so the Hasselblad Release Cord X for X1D-50c Camera is only used to take the picture without needing to touch the camera.

Q: 9. Hi! Am I able to power my Dracast LED1000 with this accessory?

A: Unfortunately, the POWER POD is really made for less power hungry devices such as small cameras and their accessories. While you could get a cable and connect the POWER POD Quad LP-E6 to the LED1000, we would recommend against it. The POWER PODs maximum watt hour rating of 53Wh would last a little more than half as much as a 98wh V-mount or Gold Mount battery. This is the reason the Dracast LED1000 is designed to work with V-mount and Gold Mount batteries. One example of such a battery is the Switronix XP-L90A 14.8 VDC Lithium Ion Brick Battery B&H # SWXPL90A.

Q: 10. Can I use it to charge batteries?

A: This device is not a charger.