Startech 39.4' Sff-8087 To 4 Sata/Sas Cable (Red)

Startech 39.4' Sff-8087 To 4 Sata/sas Cable (red)

Product Code: eq173131
Availability: In Stock

$97.74 $141.72

Qty

6 reviews Write a review

Description
Reviews (6)

The red StarTech 39.4' SFF-8087 to 4 SATA/SAS Cable (Red)connects a SATA/SAS controller to 4 SATA drives. The cable features a 36-pin plug (SFF-8087), which fans out to 4 SATA 7-pin receptacles, providing a reliable solution for connecting a SATA Hard Disk drive (HDD) to a SAS controller or backplane. Designed and constructed for long-lasting dependability and reliability, the cable provides high-performance SAS/SATA drive and backplane connectivity. In addition, the latching SATA and SAS connectors eliminate accidental disconnections.

Connect a SATA/SAS to 4 SATA Drives Reliability Backplane Connectivity Latching SATA/SAS Connectors

General
Connector 1	1x 36-Pin Mini SAS (SFF-8087), Locking
Connector 2	4x 7-Pin SATA III (6 Gb/s) Female, Locking
Cable Length	39.4' / 1 m
Physical
Certifications	RoHS
Wire Gauge	30 AWG
Weight	3.2 oz / 90.72 g
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	7.7 x 4.1 x 0.9"

Supports up to 6 Gb/s throughput per channel

Features 4 latching SATA connectors

Multi-lane SATA cable

Connects a Serial ATA hard drive to a Serial Attached SCSI (SAS) controller or backplane

Related Questions and Answers

Q: 1. Will this fit a 6dmii?

A: No. you will need a usb-mini b. Click the link below to view; https://bhpho.to/3bMlOd3 If you are looking for usb-c to the computer, then click this link; https://bhpho.to/3k1Fmgi

Q: 2. Can I update firmware for Canon EOS r3 with canon IFC 100U interface cable?

A: You cannot use the Canon IFC-100U Interface Cable (39.4") to update the firmware on the Canon EOS R3 Mirrorless Camera. Instead, open the file on your computer and then copy the .FIR file to a memory card you formatted on your camera. To do the installation, ensure the camera is fully charged and insert the card in the camera. Under the wrench group in the menu, locate the firmware option.

Q: 3. Does it work with a Nikon FM?

A: Yes Vello TSR-40 Threaded Shutter Release Cable (15.75") is compatible with the Nikon FM.

Q: 4. Have R6 MkII & tried to download files using a standard USBC to my computer (LR) but didnt connect. WIll only this cable work?

A: You can use any data transfer USB-C cable like the Canon IFC-100U Interface Cable (39.4") to transfer your images from the Canon EOS R6 Mark II Mirrorless Camera to your computer. However, you will need to download the Canon Utility software on your computer first for the camera to be recognized when connected (https://bhpho.to/4dXcuSY).

Q: 5. Hey B&H Staff: can you confirm that this cable works for power delivery as well as data transfer? Thank you!

A: If the camera you are using can be powered through USB-C, this cable should deliver the power just fine.

Q: 6. Will this work with a Graflex Crown Graphic 2x3?

A: Yes. The following cable is compatible with mechanical film cameras or digital cameras such as the graphic 2x3.

Q: 7. Can this be used for a Pentax 6x7?

A: Yes, the following item is a standard threaded for pneumatic bulb/cable releases.

Q: 8. Will it fit Canon R5

A: Yes it will , Canon R5 takes USB Type-C

Q: 9. Does the top button screw onto the trigger? I've experienced the top unscrewing & getting lost on cheap cable releases

A: Yes it screws on, solution, crazy glue or epoxy the button.

Q: 10. Will this work on a Leica iiif?

A: No it does not fit Leica iiif

Odycanopie5	07/09/2024
[0.15 lb] ... I installed Windows 10 64 bit on my PC. Nothing hot swap about it now that I can find. Under Windows 7 64 bit it was genuinely hot swap. It was the simplest thing to install and use. With Win 10 I need to power off the PC, remove the HDD installed, insert the required HDD and power on again. I can't find a solution so this is a last resort :-( . From what I've found it is a problem with Win 10 not the device. Nonetheless, with 4 HDDs ranging from 3 to 6 TB, it is a pain in the sitting apparatus it won't hot swap now. If there is a solution I'd love to know what it is. 5

Drew	14/06/2024
[0.15 lb] fits 3 drives into the space of two CD drives, great space saver, nice hot swap, sturdy built, fast delivery. Simple to use, great for throw a drive in backup video data/system take it out and secure deposit it off site. easy to install, good capacity. 5

Charlie	23/05/2024
[30 AWG] To try out many hard-drives on the ASUS VivoPC VM40B-02 Desktop Computer all with distros of Linux while keeping Win 8 untouch... 5

Upi the director	22/05/2024
[0.15 lb] Nice quality, sturdy built. works well. 5

TripleJs15	19/05/2024
[0.15 lb] Worked exactly as described 5

Nick	15/04/2024
[30 AWG] This cable works with all types of U.2 drives when connected to a slim line SAS connector on the motherboard, HBA, or RAID card. It is universally compatible with Highpoint HBAs, other HBAs, or direct connection to the CPU. Speeds on the drives I have connected using this cable meet their full advertised speed. 5