Canare Starquad Xlrm Cable Neutrik Xlrm/Xlrf 3' Black

Canare Starquad Xlrm Cable Neutrik Xlrm/xlrf 3' Black

Product Code: eq173177
Availability: In Stock

$112.50 $175.50

Qty

11 reviews Write a review

Description
Reviews (11)

The black Canare Starquad XLRM Cable Neutrik XLRM/XLRF 3' Blackis handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Parameters
Connector 1	1x XLR 3-Pin Unisex
Connector 2	1x XLR 3-Pin Male
Cable Length	3' / 0.9 m
Number of Conductors	4
Wire Gauge	21 AWG
Color	Black
Shielded	Yes
Nominal Impedance	44 Ohms
Conductor Capacitance	46.0 pF/ft at 1 kHz
Packaging Info
Package Weight	0.65 lb
Box Dimensions (LxWxH)	6 x 4.5 x 1"

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. Can I tether from my 6d Mark ii to my IMac

A: Yes, you can use this to tether.

Q: 2. is this compatible with nikon d 5300 ?

A: No. If you are connecting to the USB-A port on your computer with a Nikon D5300 you require the Tether Tools TetherPro USB 2.0 Type-A Male to Mini-B 8-Pin cable https://www.bhphotovideo.com/c/product/1257734-REG/tether_tools_cu8015_org_tetherpro_usb_2_0_type_a.html

Q: 3. Will this cable work with Nikon D750?

A: I bought it for use on my Nikon D3X. Unfortunately, it didn't fit. The USB portion snugged into the laptop alright but the part that goes into the camera was too small. I suspect it might be the same issue with the Nikon D750. I hope this helps.

Q: 4. I have used a Tether Pro cable like this for my Nikon D7000, and it works well. I also have a Nikon D7100 that I would like to tether to my PC, but the USB port on the D7100 is smaller. Does this cable work for the D7100?

A: I have amended my previous answer.....The simple answer is NO. The Nikon D7000 uses a mini B 5 pin and the Nikon D7100 uses a mini B 8 pin.Luckily this port carried over to the D750.Tether Tools page has a listing of cables for various cameras!!Go to the Tether Tools site for a comparability listing.Hope this helps...Steve

Q: 5. What gauge wire is used in these cables? I just ordered 28/24 AWG cables and wondering how these are any better, if so.

A: The TetherPro USB 2.0 to Mini-B 5-Pin gauge is 24 AWG. TetherPro USB cables are constructed to the highest possible USB specifications and incorporate all of the latest technology ensuring consistent and reliable conductivity, and the fastest and most reliable transfers. The TetherPro Premium version USB 2.0 A to Mini-B 5-Pin cable with gold plated connectors for corrosion resistance ensures consistent and reliable conductivity. The cable has a reinforced Ferrite core to filter out signal noise and reduce transmission errors and full-lined shielding to protect against external signal interference.

Q: 6. Would work with my canon 6D?

A: Yes, this is the correct cable for the Canon 6D.

Q: 7. Will this work with a Canon 80D and a Mac Book Pro 2012?

A: Yes, the Tether Tools TetherPro USB 2.0 Type-A to 5-Pin Mini-USB Cable (Orange, 15') is the correct tethering cable for your camera and computer.

Q: 8. would this cable work with a canon T6i?

A: Yes, this cable will work with the Canon T6i.

Q: 9. Does this cable work with the Nikon D7000 and D7100 tethered to a MacBook Pro?

A: Yes

Q: 10. can i use this on 5D mark III ?

A: No, the Canon 5D Mark III uses the Mini-B 5 pin cable: a href= http://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html target= _blank http://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html/a

Simon	28/09/2024
[44 Ohms] These Canare XLR plugs made a solid connection with the equipment, are well made, sound great, and are well finished with Neutrik furnishings. Based on this purchase, I wouldn't hesitate to try more products from Canare. 5

Joe	27/09/2024
[0.65 lb] I've been using the Canare XLR cables purchased from B&H for several years now. I setup and tear down EVERY DAY. Flexibility and lack of noise is excellent especially in rooms where a lot of other electronics are operating. Never a issue with crosstalk. Best of all the colors makes my setup easily repeatable, dependable. and FAST ! Got to love THAT !! Many thanks both to Canare & B&H. Excellent product combined with outstanding availability and service. 5

Robert	26/09/2024
[6 x 4.5 x 1"] Quiet and reliable Hi-Fidelity. Not cheap but you really do get what you pay for. Had my studio wired mostly in Canare Star Quad and thanks to relatively clean electricity with Star grounding I am noise free. 5

CJ-TriState	18/09/2024
[44 Ohms] Everyone knows about the high end/overpriced Mo'Gomi cables! I'll place my money on these instead! Colors, high quality & more at a FAIR price. Plus, the B&H stamp of helpfulness. I'm 100% satisfied! 5

Adam	11/09/2024
[0.65 lb] I'll make this simple: These cables brought my noise floor down, and I'm a little upset I didn't start purchasing them sooner. I used to be a bit skeptical about the importance of cables, but I won't be buying anything else form now on. 5

ALN	17/08/2024
[4] used them from snake to moniter. helped eliminate some buzzzes. 5

Erik	15/08/2024
[6 x 4.5 x 1"] It's a good solid cable. I have not complaints. 5

Erik	09/06/2024
[6 x 4.5 x 1"] I dont have much to say about the cable other than that is it well contructed and carries a good clean sound. I use it with my MXL 870 and Behringer 1204 mixer and I'm pleased with it. 5

Elvis	25/05/2024
[Yes] This is a review of the 6 foot Canare L-4E6S Star Quad XLRM to XLRF Microphone Cable. I'm currently using these with the Zoom F3 and Rode PSA1+. It will also be used for portable recording. It's very flexible (though I have no other XLR cables to compare it to.) You can coil it into a 3 diameter round circle without difficulty. It does fit into the clamps on the PSA1+, but I think a thinner cord might fit deeper down in the groove. For a permanent installation, you could probably force it deep down into the groove. The Neutrik nc-mxx connector snaps into the F3 with an elite click. The sound is without any hint of interference. I think the warranty should be longer, but these cables are excellent. 5