Canare Starquad Xlrm Cable Neutrik Xlrm/Xlrf Black 20Ft

Canare Starquad Xlrm Cable Neutrik Xlrm/xlrf Black 20ft

Product Code: eq173179
Availability: In Stock

$139.50 $193.91

Qty

16 reviews Write a review

Description
Reviews (16)

The black Canare Starquad XLRM Cable Neutrik XLRM/XLRF Black 20ftis handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Parameters
Connector 1	1x XLR 3-Pin Unisex
Connector 2	1x XLR 3-Pin Male
Cable Length	20' / 6.1 m
Number of Conductors	4
Wire Gauge	21 AWG
Color	Black
Shielded	Yes
Nominal Impedance	44 Ohms
Conductor Capacitance	46.0 pF/ft at 1 kHz
Packaging Info
Package Weight	0.95 lb
Box Dimensions (LxWxH)	6.9 x 4.6 x 1.1"

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. Is this cable compatible with a Canon 5D MK II to a 2014 Macbook Pro?

A: Yes

Q: 2. I have used a Tether Pro cable like this for my Nikon D7000, and it works well. I also have a Nikon D7100 that I would like to tether to my PC, but the USB port on the D7100 is smaller. Does this cable work for the D7100?

A: I have amended my previous answer.....The simple answer is NO. The Nikon D7000 uses a mini B 5 pin and the Nikon D7100 uses a mini B 8 pin.Luckily this port carried over to the D750.Tether Tools page has a listing of cables for various cameras!!Go to the Tether Tools site for a comparability listing.Hope this helps...Steve

Q: 3. Will this cable work with Nikon D750?

A: I bought it for use on my Nikon D3X. Unfortunately, it didn't fit. The USB portion snugged into the laptop alright but the part that goes into the camera was too small. I suspect it might be the same issue with the Nikon D750. I hope this helps.

Q: 4. Will this cable work with the D-5000 camera? If not will the 16' active extension cable work with the UC-E6 USB cable?

A: No. You would need the Tether Tools cable with Mini-B 8-Pin for the Nikon D-5000. Please see the link below:B&H # TECU5429http://www.bhphotovideo.com/c/product/1002642-REG/tether_tools_cu5429_usb_2_0_a_to.html

Q: 5. Can I use this cable to connect to Blackmagic video hub 40x and 72x for firmware updates?

A: Yes this USB cable will allow you to connect these devices to a computer for updates

Q: 6. Would work with my canon 6D?

A: Yes, this is the correct cable for the Canon 6D.

Q: 7. will this work with a mark iii ?

A: The Mark III is a USB 2.0 Mini-B 5 Pin. This is the correct cable for this camera.

Q: 8. would this cable work with a canon T6i?

A: Yes, this cable will work with the Canon T6i.

Q: 9. Does this cable work with the Nikon D7000 and D7100 tethered to a MacBook Pro?

A: Yes

Q: 10. Does this work with a canon t3i?

A: The Tether Tools website has a complete camera and cable compatibility guide. That's how I located the right cable for my camera(s).

Elvis	26/09/2024
[21 AWG] This is a review of the 6 foot Canare L-4E6S Star Quad XLRM to XLRF Microphone Cable. I'm currently using these with the Zoom F3 and Rode PSA1+. It will also be used for portable recording. It's very flexible (though I have no other XLR cables to compare it to.) You can coil it into a 3 diameter round circle without difficulty. It does fit into the clamps on the PSA1+, but I think a thinner cord might fit deeper down in the groove. For a permanent installation, you could probably force it deep down into the groove. The Neutrik nc-mxx connector snaps into the F3 with an elite click. The sound is without any hint of interference. I think the warranty should be longer, but these cables are excellent. 5

ElectricTommy	21/09/2024
[4] Great cable. As good as anything out there. 5

CJ-TriState	14/09/2024
[Black] Everyone knows about the high end/overpriced Mo'Gomi cables! I'll place my money on these instead! Colors, high quality & more at a FAIR price. Plus, the B&H stamp of helpfulness. I'm 100% satisfied! 5

ElectricTommy	05/09/2024
[4] Good Cabling 5

Sean	05/09/2024
[Yes] Have had the Canare Star Quad cables for years, running from mics, between rackmount gear, and to speakers/monitors. Zero problems: no noise, clicks securely in place, coils up easily for transport. 5

Dennis	15/08/2024
[0.95 lb] Bought this cable to connect my SM7B to a Elgato Wave XLR, worked like a charm! 5

Robert	13/08/2024
[4] Quiet and reliable Hi-Fidelity. Not cheap but you really do get what you pay for. Had my studio wired mostly in Canare Star Quad and thanks to relatively clean electricity with Star grounding I am noise free. 5

Erik	21/07/2024
[Yes] I dont have much to say about the cable other than that is it well contructed and carries a good clean sound. I use it with my MXL 870 and Behringer 1204 mixer and I'm pleased with it. 5

Jeff	06/07/2024
[0.95 lb] I'm using these in a high end analog stereo system at home and the benefits over the RCA cables was not subtle. There's a significant presence of the soundstage but also hearing details in my demo tracks I didn't know was there. No coloring of the sound. These have squahsed my entire investment in much more expensive RCA cables. I am a fan. 5

MICHAELtMARSDEN	05/07/2024
[Black] Was looking for an affordable cable that came in any other color than standard black and these fit the bill beautifully. Having multiple colors makes set up, tear down and trouble shooting that much easier due to quickly being able to identify the cable sources by color instead of having to trace it back to the connection point. 5