Canare Starquad Xlrm Cable Neutrik Xlrm/Xlrf Black 35Ft

Canare Starquad Xlrm Cable Neutrik Xlrm/xlrf Black 35ft

Product Code: eq173180
Availability: In Stock

$161.85 $237.92

Qty

16 reviews Write a review

Description
Reviews (16)

The black Canare Starquad XLRM Cable Neutrik XLRM/XLRF Black 35ftis handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Parameters
Connector 1	1x XLR 3-Pin Unisex
Connector 2	1x XLR 3-Pin Male
Cable Length	35' / 10.6 m
Number of Conductors	4
Wire Gauge	21 AWG
Color	Black
Shielded	Yes
Nominal Impedance	44 Ohms
Conductor Capacitance	46.0 pF/ft at 1 kHz
Packaging Info
Package Weight	1.45 lb
Box Dimensions (LxWxH)	7.9 x 7 x 1.4"

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. Can I use this cable to connect to Blackmagic video hub 40x and 72x for firmware updates?

A: Yes this USB cable will allow you to connect these devices to a computer for updates

Q: 2. is this compatible for de nikon 610?

A: Yes, this is the camera we use this cable with. Works great.

Q: 3. What gauge wire is used in these cables? I just ordered 28/24 AWG cables and wondering how these are any better, if so.

A: The TetherPro USB 2.0 to Mini-B 5-Pin gauge is 24 AWG. TetherPro USB cables are constructed to the highest possible USB specifications and incorporate all of the latest technology ensuring consistent and reliable conductivity, and the fastest and most reliable transfers. The TetherPro Premium version USB 2.0 A to Mini-B 5-Pin cable with gold plated connectors for corrosion resistance ensures consistent and reliable conductivity. The cable has a reinforced Ferrite core to filter out signal noise and reduce transmission errors and full-lined shielding to protect against external signal interference.

Q: 4. will this work with a mark iii ?

A: The Mark III is a USB 2.0 Mini-B 5 Pin. This is the correct cable for this camera.

Q: 5. Does this work with a canon t3i?

A: The Tether Tools website has a complete camera and cable compatibility guide. That's how I located the right cable for my camera(s).

Q: 6. Will this cable work with the D-5000 camera? If not will the 16' active extension cable work with the UC-E6 USB cable?

A: No. You would need the Tether Tools cable with Mini-B 8-Pin for the Nikon D-5000. Please see the link below:B&H # TECU5429http://www.bhphotovideo.com/c/product/1002642-REG/tether_tools_cu5429_usb_2_0_a_to.html

Q: 7. Will this cable work with Nikon D750?

A: I bought it for use on my Nikon D3X. Unfortunately, it didn't fit. The USB portion snugged into the laptop alright but the part that goes into the camera was too small. I suspect it might be the same issue with the Nikon D750. I hope this helps.

Q: 8. Will this work with a Canon 80D and a Mac Book Pro 2012?

A: Yes, the Tether Tools TetherPro USB 2.0 Type-A to 5-Pin Mini-USB Cable (Orange, 15') is the correct tethering cable for your camera and computer.

Q: 9. Does this cable work with the Nikon D7000 and D7100 tethered to a MacBook Pro?

A: Yes

Q: 10. Does this cable work with Canon 77D?

A: Sorry, I dont know. It works with my Canon 5DM3.

ALN	27/09/2024
[Yes] used them from snake to moniter. helped eliminate some buzzzes. 5

Elvis	26/09/2024
[21 AWG] This is a review of the 6 foot Canare L-4E6S Star Quad XLRM to XLRF Microphone Cable. I'm currently using these with the Zoom F3 and Rode PSA1+. It will also be used for portable recording. It's very flexible (though I have no other XLR cables to compare it to.) You can coil it into a 3 diameter round circle without difficulty. It does fit into the clamps on the PSA1+, but I think a thinner cord might fit deeper down in the groove. For a permanent installation, you could probably force it deep down into the groove. The Neutrik nc-mxx connector snaps into the F3 with an elite click. The sound is without any hint of interference. I think the warranty should be longer, but these cables are excellent. 5

Joe	22/09/2024
[44 Ohms] I've been using the Canare XLR cables purchased from B&H for several years now. I setup and tear down EVERY DAY. Flexibility and lack of noise is excellent especially in rooms where a lot of other electronics are operating. Never a issue with crosstalk. Best of all the colors makes my setup easily repeatable, dependable. and FAST ! Got to love THAT !! Many thanks both to Canare & B&H. Excellent product combined with outstanding availability and service. 5

Erik	12/09/2024
[7.9 x 7 x 1.4"] It's a good solid cable. I have not complaints. 5

MICHAELtMARSDEN	14/08/2024
[44 Ohms] Was looking for an affordable cable that came in any other color than standard black and these fit the bill beautifully. Having multiple colors makes set up, tear down and trouble shooting that much easier due to quickly being able to identify the cable sources by color instead of having to trace it back to the connection point. 5

Sean	29/07/2024
[44 Ohms] Have had the Canare Star Quad cables for years, running from mics, between rackmount gear, and to speakers/monitors. Zero problems: no noise, clicks securely in place, coils up easily for transport. 5

Terrell	15/07/2024
[7.9 x 7 x 1.4"] Canare star quad connectors are the best around. No need to look further. I've used 1' to 100' and no issues. These are the only XLR I use. Winner winner. 5

CJ-TriState	26/06/2024
[21 AWG] Everyone knows about the high end/overpriced Mo'Gomi cables! I'll place my money on these instead! Colors, high quality & more at a FAIR price. Plus, the B&H stamp of helpfulness. I'm 100% satisfied! 5

Robert	18/06/2024
[1.45 lb] Quiet and reliable Hi-Fidelity. Not cheap but you really do get what you pay for. Had my studio wired mostly in Canare Star Quad and thanks to relatively clean electricity with Star grounding I am noise free. 5

Erik	09/06/2024
[21 AWG] I dont have much to say about the cable other than that is it well contructed and carries a good clean sound. I use it with my MXL 870 and Behringer 1204 mixer and I'm pleased with it. 5