This 4 x 5.65" Tiffen Soft FX 1/2 IRND Filter 4x5.65" 1-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.3 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. Without the aperture ring, can I use manual mode on the X-H1 and change the aperture with the back dial? Or can I only use auto aperture?

A: Auto exposure only.

Q: 2. Looking at the questions above, it seems there are two answers to the question of using the camera dials to control the lens aperture on the adapter without the ring. Is there a definitive answer?

A: Supports electronic communication to enable image stabilization, autofocus, as well as auto exposure features. That means you can control the lens via the camera.

Q: 3. What is the height of this adapter? Can it be installed on a Fuji X-pro 3 without exceeding below? Cyrille

A: The Adapter is 3'' tall. The adapter will hang out from the bottom of an X-Pro 3 about 10mm.

Q: 4. It seems users have had mixed results in regards to whether the standard adapter (without aperture ring) allows you to manually control exposure. Does anyone know whether the standard version allows for manual exposure control with the Fujifilm X-S10? Or does it only allow for auto exporsure?

A: The Fringer EF-FX II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera is going to allow electronic aperture control, so you can use the X-S10 in manual exposure mode.

Q: 5. Is this rack mountable ?

A: Yes, the Yamaha MG20XU 20-Input Mixer with Built-In FX & 2-In/2-Out USB Interface is able to be rack mounted. The rackmount kit comes in the box with purchase.

Q: 6. This works with the autofocus motor for AF-D lenses?

A: The Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter does not support autofocus with Nikon AF-D lenses.

Q: 7. Is any company planning to develop Nikon F lens mount to Fuji X mount adapter?

A: Hi--B&H currently carries 30 Nikon F to Fujifilm X lens adapters: https://www.bhphotovideo.com/c/search?q=lens%20adapter&filters=fct_camera-body-mount_1595%3Afujifilm-x-mount%2Cfct_lens-mount_1596%3Anikon-f%7Cnikon-f-g-type-lens

Q: 8. Does it come with rack mount kit?

A: Yes it does!

Q: 9. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 10. Can I connect a mic pre-amp to this board? I assume the TRS input of the combo jacks will bypass the internal pre-amps. Thanks!

A: Good Morning, We do not use a preamp with the MG10XU as For our setup there is no need we use a amp after the MG10XU. This allows us to connect a smart phone or a computer to the amp to be heard over the speakers when needed.I do hope this helpsArt