This 4 x 5.65" Tiffen Soft FX 1 IRND Filter 4x5.65" 2-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.6 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. is the main stereo mix transmitted to computer, via USB includes any applied effects?

A: Yes anything applied to the main stereo mix is going to be transmitted through the USB connection to a computer

Q: 2. Does the Fringer EF-FX II will work on Sigma 17-50mm(canon mount) to Fujifilm X-T100?

A: It is possible to mount a Sigma 17-50mm lens with a Canon EF mount onto this EF-FX II adapter for use with the X-T100. However, your results may vary.

Q: 3. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 4. Can I connect a mic pre-amp to this board? I assume the TRS input of the combo jacks will bypass the internal pre-amps. Thanks!

A: Good Morning, We do not use a preamp with the MG10XU as For our setup there is no need we use a amp after the MG10XU. This allows us to connect a smart phone or a computer to the amp to be heard over the speakers when needed.I do hope this helpsArt

Q: 5. It seems users have had mixed results in regards to whether the standard adapter (without aperture ring) allows you to manually control exposure. Does anyone know whether the standard version allows for manual exposure control with the Fujifilm X-S10? Or does it only allow for auto exporsure?

A: The Fringer EF-FX II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera is going to allow electronic aperture control, so you can use the X-S10 in manual exposure mode.

Q: 6. Can I do loop back recording? Where I can record a vocal in real time over a karaoke track played from a web browser or media player.

A: Unfortunately you cannot it's a mixer not a recorder.

Q: 7. For the USB output, will the entire stereo mix of all inputs be sent over USB?The description says it provides two channels out - I presume these are the two L/R channels of the full mix?

A: On the MG16XU the signal from the STEREO L/R bus is output is output to the computer via the USB connection. This is sourced pre fader and not affected by the STEREO master fader.

Q: 8. Is this rack mountable?

A: Yes, and it comes with the rack mouning hardware.

Q: 9. Without the aperture ring, can I use manual mode on the X-H1 and change the aperture with the back dial? Or can I only use auto aperture?

A: Auto exposure only.

Q: 10. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.