This 4 x 5.65" Tiffen Soft FX 1/2 IRND Filter 4x5.65" 3-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.9 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. What is the weight of the adapter itself? The specs only list the package weight.

A: The weight of Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter is 180g or 6.3 ounces.

Q: 2. Does the Fringer EF-FX II will work on Sigma 17-50mm(canon mount) to Fujifilm X-T100?

A: It is possible to mount a Sigma 17-50mm lens with a Canon EF mount onto this EF-FX II adapter for use with the X-T100. However, your results may vary.

Q: 3. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.

Q: 4. For the USB output, will the entire stereo mix of all inputs be sent over USB?The description says it provides two channels out - I presume these are the two L/R channels of the full mix?

A: On the MG16XU the signal from the STEREO L/R bus is output is output to the computer via the USB connection. This is sourced pre fader and not affected by the STEREO master fader.

Q: 5. Is any company planning to develop Nikon F lens mount to Fuji X mount adapter?

A: Hi--B&H currently carries 30 Nikon F to Fujifilm X lens adapters: https://www.bhphotovideo.com/c/search?q=lens%20adapter&filters=fct_camera-body-mount_1595%3Afujifilm-x-mount%2Cfct_lens-mount_1596%3Anikon-f%7Cnikon-f-g-type-lens

Q: 6. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 7. Is this rack mountable?

A: Yes, and it comes with the rack mouning hardware.

Q: 8. Can I connect a mic pre-amp to this board? I assume the TRS input of the combo jacks will bypass the internal pre-amps. Thanks!

A: Good Morning, We do not use a preamp with the MG10XU as For our setup there is no need we use a amp after the MG10XU. This allows us to connect a smart phone or a computer to the amp to be heard over the speakers when needed.I do hope this helpsArt

Q: 9. When to use the 'pre' switch on AUX1 and AUX2 in Yamaha MG20XU mixer for singing and what would be the effect please?

A: Nobody answered this for this poor fellow? Those "pre" buttons are to set the sends to PREFADER....in other words you can turn down the gain or volume on the output to main, but the full signal will still continue to the AUX bus.

Q: 10. Can I do loop back recording? Where I can record a vocal in real time over a karaoke track played from a web browser or media player.

A: Unfortunately you cannot it's a mixer not a recorder.