This 6.6 x 6.6" Tiffen Soft FX 1/2 IRND Filter 6.6x6.6" 1-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.3 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.

Q: 2. how do you connect the MG12XU to a receiver and 4 speakers ?

A: You can use the two XLR Stereo outputs and the two Stereo outputs to plug into your speakers left and right. Assuming they are active speakers and accept XLR and inputs. You will find these outputs in the far right at the top of the mixer.

Q: 3. Is any company planning to develop Nikon F lens mount to Fuji X mount adapter?

A: Hi--B&H currently carries 30 Nikon F to Fujifilm X lens adapters: https://www.bhphotovideo.com/c/search?q=lens%20adapter&filters=fct_camera-body-mount_1595%3Afujifilm-x-mount%2Cfct_lens-mount_1596%3Anikon-f%7Cnikon-f-g-type-lens

Q: 4. Does the Fringer EF-FX II will work on Sigma 17-50mm(canon mount) to Fujifilm X-T100?

A: It is possible to mount a Sigma 17-50mm lens with a Canon EF mount onto this EF-FX II adapter for use with the X-T100. However, your results may vary.

Q: 5. On the adapter without the aperture ring, can you still set the apertures on the lens using the controls built into the body of the Fuji camera?

A: Yes, it supports using the camera to control the lens aperture.

Q: 6. This works with the autofocus motor for AF-D lenses?

A: The Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter does not support autofocus with Nikon AF-D lenses.

Q: 7. What is the country of origin for this product?

A: The Yamaha MG16XU Mixer is made in Malaysia.

Q: 8. For the USB output, will the entire stereo mix of all inputs be sent over USB?The description says it provides two channels out - I presume these are the two L/R channels of the full mix?

A: On the MG16XU the signal from the STEREO L/R bus is output is output to the computer via the USB connection. This is sourced pre fader and not affected by the STEREO master fader.

Q: 9. It seems users have had mixed results in regards to whether the standard adapter (without aperture ring) allows you to manually control exposure. Does anyone know whether the standard version allows for manual exposure control with the Fujifilm X-S10? Or does it only allow for auto exporsure?

A: The Fringer EF-FX II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera is going to allow electronic aperture control, so you can use the X-S10 in manual exposure mode.

Q: 10. When to use the 'pre' switch on AUX1 and AUX2 in Yamaha MG20XU mixer for singing and what would be the effect please?

A: Nobody answered this for this poor fellow? Those "pre" buttons are to set the sends to PREFADER....in other words you can turn down the gain or volume on the output to main, but the full signal will still continue to the AUX bus.