This 6.6 x 6.6" Tiffen Soft FX 1 IRND Filter 6.6x6.6" 2-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.6 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. This works with the autofocus motor for AF-D lenses?

A: The Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter does not support autofocus with Nikon AF-D lenses.

Q: 2. What is the country of origin for this product?

A: The Yamaha MG16XU Mixer is made in Malaysia.

Q: 3. Is the physical dimension between Fringer EF-FX Pro II and Fringer EF-FX II the same?

A: There are no exact dimensions available for these items, but the Fringer EF-FX II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera has basically the same dimensions as the Fringer EF-FX Pro II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera.

Q: 4. When to use the 'pre' switch on AUX1 and AUX2 in Yamaha MG20XU mixer for singing and what would be the effect please?

A: Nobody answered this for this poor fellow? Those "pre" buttons are to set the sends to PREFADER....in other words you can turn down the gain or volume on the output to main, but the full signal will still continue to the AUX bus.

Q: 5. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.

Q: 6. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 7. Is this mixer same size as yamaha mg16xu ?

A: Yes, the Yamaha MG20XU and MG16XU mixers are both the same size. The dimensions are 17.5 x 5.1 x 19.7" (444 x 130 x 500mm).

Q: 8. For the USB output, will the entire stereo mix of all inputs be sent over USB?The description says it provides two channels out - I presume these are the two L/R channels of the full mix?

A: On the MG16XU the signal from the STEREO L/R bus is output is output to the computer via the USB connection. This is sourced pre fader and not affected by the STEREO master fader.

Q: 9. No Hi-Z switch for any of the inputs--therefore, I can't/shouldn't plug an electric guitar or bass directly into this mixer; I should use a 'direct box'--am I understanding that correctly? Thanks.

A: That is correct. Since there is no Hi-Z switch on this mixer a direct box would be required to plug a guitar or bass into it. Here's a solid DI option B&H # RAPRODI.

Q: 10. Can I do loop back recording? Where I can record a vocal in real time over a karaoke track played from a web browser or media player.

A: Unfortunately you cannot it's a mixer not a recorder.