This 6.6 x 6.6" Tiffen Soft FX 1 IRND Filter 6.6x6.6" 4-Stopis an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

1.2 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. how do you connect the MG12XU to a receiver and 4 speakers ?

A: You can use the two XLR Stereo outputs and the two Stereo outputs to plug into your speakers left and right. Assuming they are active speakers and accept XLR and inputs. You will find these outputs in the far right at the top of the mixer.

Q: 2. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 3. For the USB output, will the entire stereo mix of all inputs be sent over USB?The description says it provides two channels out - I presume these are the two L/R channels of the full mix?

A: On the MG16XU the signal from the STEREO L/R bus is output is output to the computer via the USB connection. This is sourced pre fader and not affected by the STEREO master fader.

Q: 4. Is it possible to hook up this mixer to my a/v receiver (Denon AVR-4308CI) which I already connect to speakers? and how? Thanks

A: Yes, the Yamaha MG10XU could be connected to an AV receiver. You could connect the stereo outputs of the MG10XU to one of the receiver's audio inputs with a 1/4" to RCA stereo cable such as BH #HOHPR003X2.

Q: 5. When to use the 'pre' switch on AUX1 and AUX2 in Yamaha MG20XU mixer for singing and what would be the effect please?

A: Nobody answered this for this poor fellow? Those "pre" buttons are to set the sends to PREFADER....in other words you can turn down the gain or volume on the output to main, but the full signal will still continue to the AUX bus.

Q: 6. Are the 1/4 inputs on channels one through four balanced TRS?

A: Channels 1-4 on the mixer are XLR and XLR can be balanced or unbalanced. Depends entirely on how you choose to output the mic channels.

Q: 7. Is the physical dimension between Fringer EF-FX Pro II and Fringer EF-FX II the same?

A: There are no exact dimensions available for these items, but the Fringer EF-FX II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera has basically the same dimensions as the Fringer EF-FX Pro II Lens Mount Adapter for EF- or EF-S-Mount Lens to Fujifilm X-Mount Camera.

Q: 8. Can I use a dynamic and a condenser mic at the same time? Does it give individual phantom power?

A: The Yamaha Yamaha MG10XU can provide phantom power to channels 1-4 together, but phantom power cannot be toggled on/off for an individual channel. This would not pose a hazard to most dynamic microphones, although with vintage or ribbon mics you would want to be cautious.

Q: 9. On the adapter without the aperture ring, can you still set the apertures on the lens using the controls built into the body of the Fuji camera?

A: Yes, it supports using the camera to control the lens aperture.

Q: 10. is it HD and LCD rated so no glare or dulling bin out side sunlight? Can It be cut to fit? or do you have a porduct that can. P

A: The Sony Soft LCD Protector will not dull the LCD screens. However, depending on the angle of the light, you might get glare. It is made for 3.5" LCD screens and cannot be cut. The Sensei Cut-to-Fit Soft LCD Screen Protector (6 Pack) could be cut to size. Here is the link: https://bhpho.to/3ZRZeYN.