The Glidecam X-20 Camera Stabilizer with V-Mount Batteryfrom Glidecam X-20 Camera Stabilizer with V-Mount Batteryis designed to provide smooth, floating camera movements when shooting with cameras weighing between 10 and 20 lb. It works by isolating the camera from your body's motion and keeps it in a balanced, motionless state.

When equipped, the X-20 system allows you to walk, run, climb stairs, and go over uneven terrain while keeping your shots level and free from shakes. The system features a support arm, vest, sled, and V-mount battery plate. A docking bracket, arm post, hardware for assembly, and a BNC to BNC/RCA video cable come included.

For Cameras Between 10 and 20 lb    Dual-Articulating Support Arm    Quick Release Camera Plate    3-Axis Gimbal    V-Mount Battery Plate    Telescoping Center Post    Support Vest with Trimming Mechanism    Docking Bracket Included

The Dyna-Elastic, dual-articulating support arm is machined from T6 aluminum and allows for smooth camera booming and position adjustments. The 18 precision, double-shielded radial bearings produce minimal friction which allows the arm to boom and pivot smoothly and quietly. Four titanium extension springs give the support arm its lifting power. The spring tension is adjustable to accommodate cameras of varying weights. The arm can support a maximum load of 30 lb. It is also configurable for left or right-handed use.

The strong and lightweight sled is designed to hold cameras from 10 to 20 lb. It is comprised of a camera balance platform, a 3-axis gimbal, a dynamic base platform, and a telescoping center post.

Incorporates a quick release, drop-in dovetail camera plate for quickly attaching or removing your camera. Fine-tuning control knobs allow you to adjust the platform front-to-back and side-to-side, for obtaining horizontal balance.

The 3-axis gimbal offers several adjustable, axis convergence controls and allows all three axes to intersect for proper operational alignment. Change the location of the gimbal on the central post for quick adjustment of vertical balance. The gimbal features an ergonomically designed curved handle and a gimbal tube with a tight, machined knurled texture.

Adjust the system's dynamic balance and increase or decrease the system's rotational pan inertia using a dynamic base platform. The platform comes with one V-mount battery plate and a BNX to BNC/RCA video cable.

The telescoping center post allows you to adjust the sled's length and the position of an optional LCD monitor and battery.

The support vest distributes the weight of the system across your shoulders, back, and hips. The vest is adjustable to fit operators of different sizes and features EVA foam padding for added comfort. The quick release buckles allow the vest to be easily removed. The vest incorporates a Trimming Mechanism and arm-to-vest connector that allows the angle of the support arm to be adjusted. This lets you neutralize the weight of the arm relative to your body's center of gravity. The support arm can be attached and removed for the vest without adjusting your trim settings.

The docking bracket attaches to a c-stand and allows you to securely rest and balance your X-20 system and camera while you change batteries and accessories, or when the system is not in use.

Related Questions and Answers

Q: 1. Hi Would this work with my Lumix GX8 with 14-45mm lens?

A: Yes you can. The XR-Pro has a load capacity between 0 to 10 pounds. You will be able to balance a lighter load such as the Lumix GX8 with a 14-45mm lens.

Q: 2. Will this work with a C300 or an FS7?

A: This stabilizer has a load capacity up to 10 pounds. The Sony FS7 is 9.9 pounds before you add a lens, it will not work on this stabilizer. However the C300 weighs around 6 pounds, before a lens, and you can even strip it down a bit for it to weight less. It will be possible to use this stabilizer with the C300, if you keep the total weight under 10 pounds.

Q: 3. Hey, is this usable for lumix lx 100? 393g. and is it easy to carry around?

A: Yes

Q: 4. What is the difference in this and the flycam redking

A: The Glidecam is the brand that created this stabilizer style.

Q: 5. Can some tell me the difference between the xr-pro and the hd2000? Using a canon 80d 18-135mm .. thanks

A: The principal difference between the two is the payload capacity. The XR-PRO can carry 10 lbs and the HD2000 can do 2-6 lbs. Your Canon 80D with a 18-135mm lens is well within the capability of the HD2000.

Q: 6. Will this work for a GH7? I know it's pretty light and this is my first Glidecam purchase.

A: Yes it should. The XR-Pro has a load capacity between 0 to 10 pounds, you are able to use light weight cameras with this stabilizer.

Q: 7. I have GH4 and a cage for it as well. i know balancing will be an issue if I mount to the cage. Can I use this with a 7 inch monitor mounted to the base? a freeworld monitor to be exact.

A: Almost from the beginning when Garret Brown invented the Steadicam, the monitor has been mounted at the base. This make complete sense because you can be situationally aware of where your feet are going. We feel you should not have any particular issues here since the camera, the cage and the monitor do not exceed the weight capacity of the rig. You should be able to balance. If you do have issues, do contact us. provideo@bhphoto.com

Q: 8. Can you shoot this inverted for low shots?

A: Yes, just invert post at gimbal and shoot low mode

Q: 9. How well will this balance with a C100 Mii?

A: It will balance perfectly. Just be patient for balancing is the single most frustrating procedure new users encounter. Glidecam has several videos on how to do this.

Q: 10. Is the top cheese plate removable? If so, does it have a 3/8 -16 thread so I can attach my own quick release, and shave weight from the top? Thanks!

A: The plate is removable, you can attach your own plate - any brand any size- Keep in mind the least weight, the longer you would handle your camera.