The 3x50 Avenger Gen II Night Vision Weapon Sight from Bering Optics is a close to mid-range optic for tactical use in low light or complete darkness. This NVD is equipped with a Gen 2+ intensifier tube that is capable of up to 64 lp/mm resolution, delivering more definition and contrast than previous generation image intensifiers. Automatic Brightness Control maintains the image brightness at an optimal level and produces relatively constant image quality in dynamic light conditions. A red-illuminated floating Mil Dot reticle offers enhanced contrast against the green night vision image and assists the shooter with range and holdover estimation.

This configuration of the Avenger weapon-mounted optic has 3x magnification and f/1.5 light gathering ability, enabling adequate light transmission for effective targeting under moonlight. For indoor use or when operating under heavy cloud cover, the Avenger's built-in 25mW infrared illuminator is capable of lighting a subject up to 55 yd away. This NVD also has a manual focus objective capable of focusing to within 10 yd and an accessory side rail that supports an additional tactical accessory, such as a long-range IR illuminator or laser aiming device. An IPX4-compliant, water-sealed housing makes the Avenger NVD ready to perform in light rain, high humidity, and even freezing temperatures.

Gen 2+ Image Intensifier    57 lp/mm Typical Resolution    Automatic Brightness Control    Built-In 25mW 850nm IR Illuminator    1/8 MOA Impact Point Correction    80mm f/1.5 Lens System, Manual Focus    IPX4 Water-Resistant Housing    Picatinny / Weaver Rail Mount    Accessory Picatinny / Weaver Side Rail    Illuminated Red-on-Green Mil Dot Reticle

• Gen 2+ intensifier tube
• 57lp/mm typical resolution, 64lp/mm maximum
• Automatic Brightness Control

• 3x magnification, 50mm objective
• 80mm f/1.5 lens system
• 13° angle of view
• 50mm eye relief
• Illuminated red-on-green floating Mil Dot reticle

• 25mW 850nm infrared illuminator
• 1/8 MOA windage and elevation adjustments
• 72 MOA windage and elevation adjustment range
• Picatinny / Weaver accessory side rail
• In-view low-battery indicator
• Adjustable reticle brightness

• IPX4 water-resistant housing
• Rated to operate in 98% humidity
• -22 to 122° operating temperature
• Shock-resistant construction
• Vertically positioned battery housing
• 33.5 oz weight

Related Questions and Answers

Q: 1. What adapter do I need with this c-stand to use with an Alien Bee 800?

A: You need this stud , Avenger E650 6.0" Pin with Collar B&H # AVE650

Q: 2. What is the lowest height setting on this? Thinking of it for a Red Rock One Man Crew sit down rig

A: The minimum working height of the Avenger A2018FCB C-Stand (Black, 5.7'), B&H # AVA2018FCB, is listed as 2.5 feet (0.8 meters). This also happens to be the collapsed height of the stand for storage/transport.

Q: 3. Will This C-Stand Hold Up the Prolycht Orion 300?

A: Yes this stand is appropriate for the Prolycht Orion 300.

Q: 4. is this c-stand painted or actual black steel?

A: This stand is painted black which holds up pretty well. I have only had issues of it scratching off were I tighten the screw to mount the light

Q: 5. Do these legs self deploy when you place the legs on the ground?

A: No, you have to set the legs out yourself.

Q: 6. Is this compatible with “impact” brand c stands? If not, do you know if “impact” makes a short version (6’) like this?

A: This stand has a standard baby pin stud on the top. 5/8" baby pins are a standard so it is compatible with the same grip heads and accessories a Impact C stand would be compatible with.

Q: 7. Minimum height of this light stand is given as 1.8' or .7 meters. 1.8' is approximately 27". 0.7 meters is approximately 27 or 28 inches. What is the correct minimum height for this light stand?

A: Its is 27.17". Thank you for pointing out the typo.

Q: 8. How much weight is it rated to hold?

A: Hi DavidAt the arm's full extension the manufacturer advises 7kg or around 15.43lb. I've put the following on with no issues: Profoto D1 with a 3' octobox Bowens Gemini Espirit 500 monolight Profoto D1 with a Mola 22 beauty dish Profoto ProTwin head with Magnum reflector I always have a 10 lb counter weight clamped to the arm for balance. (Those yellow painted ones from Impact)All of this sits on an Avenger C stand, and the whole setup feels very stable. I've used this setup for a couple of years, at the time I bought the arm I looked at a whole bunch of different booms, this arm was the best solution for me for load capacity, portability and price as I had a spare C stand I could mount it to.Hope this helps!

Q: 9. I know what this boom arm can supposedly support 15lbs at its max. extension, but what is the load rating at its min. extension? I'm trying to hold a Westcott Zeppelin above and angled over my subject, but the parabolic shape hinders its ability to be angled downwards. As such, I am resorting to using a boom arm to lower its angle. As such, I will not need the longer extensions and want to know how much this arm will hold at its shortest length. I'm looking to hold the Zeppelin 47 , with the Bowens bracket, as well as the focusing rod and the Bowens speed ring to hold my attach my Phottix Indra500 TTL. I think the total weight is something around 17-19lbs.

A: At minimum extension the load capacity is about 66 lbs

Q: 10. Can I located the stands on stairs ?? I'm not sure if this could be possible thanks.

A: No. We suggest c-stands with sliding legs. Please review the following item Savage 40" Riser C-Stand with Sliding Leg (Black, 9.6') BH #SACB600 • MFR #CB-600 https://bhpho.to/3BHsDcD