The AMT P808 Bell Mounted High SPL Clip-On Microphone is designed for trombone, low brass, high pressure trumpet and saxophone playing, requiring a bell mount and producing extreme SPL levels. Designed and manufactured by hand, the system is intended to clip onto flanged bell instruments and is the choice for professionals that play at high SPL levels and are looking for a bell-mounted microphone.

The P808 Clip-On Microphone includes features like D.C.T. (Disconnect Cable Technology) with the ability to connect to the Wi5C creating a belt pack free wireless system. The P808 in its stock configuration is a good choice for the players who need a hard wired (non wireless) belt pack style setup. The setup includes the BP 45 belt pack preamp. It can be used wirelessly as well by changing between AMT’s various preamps (sold separately). This system allows the player to easily change to and from AMT's various preamps (sold separately) while also allowing for direct connections to the Wi5C, Shure, or Sennheiser wireless systems (sold separately).

With a change of cable (sold separately), you can convert the microphone from a belt-pack style preamp over to a wireless setup quickly and easily. This is a good choice for playing in loud environments such as lead trumpet and rock-n-roll saxophone where high SPL levels are reached. The P808 is intended for a principal artist, ensemble sections, or as a soloist. The microphone is suspended in a 4-point isolation ring reducing key and handling noise. Phantom power or 1 AA battery is required for hardwired / belt-pack use.

The P808 Clip-On Microphone comes complete with the BP45 belt pack style preamp, case, and the AMT’s disconnecting cable technology to allow the microphone to be used wireless with the AMT Wi5C, Shure, or Sabine Wireless (sold separately). The Sennheiser cable is also sold separately.

D.C.T. (Disconnect Cable Technology)

Related Questions and Answers

Q: 1. I am trying to shoot head&shoulders or portrait shots for a video blog but I need to shoot from 6 to 8 ft away. The existing 2x built in lens to various iPhones don't cut it. I've seen the 2x adaptor lens on top of the 2x built-in lens which makes 4x. It's not bad so I am looking for a 4x or 5x adaptor. I can't find such an item. Is a 3x lens workable?

A: A 3x lens is workable for what you are trying to do. An alternative to the Movo Photo SPL-TELE 3x Telephoto Lens is BH #BEBGL111TL, which will give you natural looking portraits.

Q: 2. Can you please tell me the recording time and battery life of the transmitters WITH 32-bit enabled?

A: The DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone (2.4 GHz) has a battery life of about six hours. When recording in 32-bit, you will have a little over 11 hours of storage space. Files automatically split every 23 minutes, and recording stops when storage is full.

Q: 3. Can a shotgun mic with a 3.5mm trs connector, like the Sennheiser Mke 600, be used connected to the transmiter?

A: Yes, the Sennheiser MKE 600 Shotgun Microphone can be connected to the 3.5mm min input on one of the transmitters for the DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder. The MKE 600 will need to be powered with a AA battery.

Q: 4. The unit won't work with the supplied cable and an XLR adaptor the supplied cable into my camera XLR input, Is there a fix?

A: Please be sure that the receiver for the Saramonic Blink Me 2-Person Clip-On Wireless Microphone System is set to "mono" mode when using a single XLR adapter. For "stereo" mode, a 3.5mm to dual XLR Y-cable, like the Saramonic SR-UM10-CC1 3.5mm TRS to Two XLR Male Output Y-Cable for Wireless Mic Systems (B&H # SASRUM10CC1), should be used. Additionally, make sure the camera's input level is set for "mic" and the phantom power setting (48V) is turned off.

Q: 5. Will this work on my iPhone 13 Pro Max while using the Peak Design Everyday case?

A: Yes, the Movo Photo SPL-WA 18mm Wide Angle Clip-On Smartphone Lens will also work with the Peak Design case.

Q: 6. Can the DJI Mic 2 connect directly with an Android or iPhone?

A: It is not possible to connect the DJI Mic 2 Clip-On Transmitter/Recorder with Built-In Microphone (2.4 GHz, Shadow Black) to iOS or Android devices directly without the receiver. You must purchase the entire DJI MIC 2 system in order to accomplish this.

Q: 7. Will this mic pair with a Marshall bluetooth speaker?

A: Unfortunately not, the Sabinetek SmartMike Lite Bluetooth Wireless Clip-on Microphone for Smartphone (Black) will only work with iOS and Android smartphones or tablets and will require the use of an app.

Q: 8. In the manual, it states that "if the receiver reaches its safe battery level it will stop charging the transmitters". Huh?

A: Unfortunately, there was an error in the wording of the user manual for the Saramonic Blink Me 2-Person Clip-On Wireless Microphone System. Instead of stating "if the receiver reaches its safe battery level it will stop charging the transmitters," it should say "it will start charging the transmitters." Saramonic has been made aware of the error and apologizes for any confusion it has caused.

Q: 9. Can this be used with a windows laptop? Have a laptop without an external mic input, need an adapter. Thanx

A: The Sabinetek SmartMike Lite Bluetooth Wireless Clip-on Microphone for Smartphone makes its connection with its host over Bluetooth wireless connection as opposed to hardwired into an external mic input. If the laptop has Bluetooth receiving capabilities, the SmartMike may work in this manner.

Q: 10. Can this microphone be used with a Nikon D5000 or a Canon Rebel T3?

A: I have several Nikon cameras with mic sockets and it works with all of them.