The HD-488 HD-SDI Timecode Reader/Generator/Inserter from ESE is configured for HD-SDI (High Definition Serial Digital Interface) video. Linear Timecode (LTC) and RP-188 Timecode are both read and generated by the HD-488. The unit also accepts a multitude of HD formats. The Inserter mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text can be superimposed onto the video. Flexibility is also provided to the user, allowing for selection of the information to be displayed (time, time, and user bits or text) on up to three different windows which are independent of each other and can be blanked.

Accepts multiple HD formats

Generates, reads, and inserts LTC/RP188 timecodes

Dual LTC output

USB setup interface

User-friendly control

Time zone offset

LCD setup/status display

Universal power supply (90 to 264 VAC)

Transcode RP-188 to LTC

Transcode LTC to RP-188

Timecode/time of day/user text window burn

Master timecode generator

GPS master clock (with GPS option)

NTP sourced master clock (with NTP-C option)

GPS sourced NTP server (with NTP & GPS options)

IRIG-sourced NTP server (with NTP & IRIG options)

IRIG-B generator (with IRIG option)

Transcode IRIG A/B/G to IRIG-B or SMPTE codes (with IRIG option)

Transcode SMPTE codes to IRIG-B (with IRIG option)

Drive standard ESE remote displays with time of day

Related Questions and Answers

Q: 1. Can this sync an Atomos AtomX module or directly to the ninja V?

A: No, Currently the Tentacle Sync will not wirelessly connect to the Atomos AtomX Sync. See this info from Tentacle. https://bit.ly/3t1apA7

Q: 2. Will this model also have the same limitation of U.S. models being restricted from monitoring during recording?

A: Yes, the Tentacle Sync Sync E Mk2 Sync E Timecode Generator with Bluetooth (Dual Set) has the restriction on monitoring while recording.

Q: 3. Can tentacle sync send lavaliere audio to camera?

A: The Tentacle Sync E mkII Timecode Generator is only a timecode generator and does not support lav mic connection. An alternate solution could be - Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support https://bhpho.to/3HpaN38

Q: 4. Does this work with Sony FS5?

A: The Denecke Dcode SB-4 Syncbox Timecode Generator will not work with the Sony FS5.

Q: 5. Could I use a BNC cable, like the one linked below, to use this Tentacle Sync with a Sony FX6? I'm looking to find a way to use the FX6 without a top handle and still have an audio source. https://www.bhphotovideo.com/c/product/1327596-REG/tentacle_sync_c08_cable_tentacle_to.html

A: Yes, You can use the Sony FX6 time code port which is BNC with this cable. Good info from Tenticle sync - https://bit.ly/3qcTYih Also see page 7 #23 in the FX6 manual for the port location - https://bit.ly/3e6Rpv2

Q: 6. I want identical time code on four Pocket Cinema Camera 4K units. How many of these units do I need? Do I need anything else?

A: You will need four Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 (Single Set) acting as clocks for each Blackmagic Design Pocket Cinema Camera 4K. The 3.5mm Mini Jack Cable (Right-Angle) included with the timecode generator can connect to the 3.5mm ports on the cameras.

Q: 7. Does this affect the audio I get through the MI shoe on a Sony A7SIII using the ECM-W2BT?

A: The Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 would use one channel of audio to record timecode info. Audio timecode is recorded on the left channel, while the scratch audio of the Sync E is recorded on the right channel. A solution like the Tentacle Sync E would be used for an external audio recorder, and you would not be recording audio in camera. The A7SIII has four audio channels to work with, so you should still be able to use your Hot Shoe mic. SONY A7SIII Audio channels: https://bit.ly/4984FH7

Q: 8. Will this work with a bmpcc 4k and a canon c70?

A: We would only recommend using the Deneke Dcode SB-4 Syncbox Timecode Generator with a camera that has dedicated timecode ports. The Canon C70 does feature a dedicated timecode port through it's BNC adapter and would be compatible with this Timecode Generator.

Q: 9. I think Fx3 have internal timecode , do I need this?

A: Yes, If you want to match timecode with other cameras or devices you would need the Tentacle sync kit.

Q: 10. Can we control multiple LX-991U displays from our ESE ES-362U master clock using a simple BNC T connector?

A: Yes, the ESE ES-362U master is capable of driving up to 100 slave displays via BNC, including the ESE LX-991U Timecode Remote Display ("LX" Enclosure) through a BNC-T connector or for long runs, using a distribution amplifier such as the ES-243. See the link below: https://bit.ly/3DQQ5GZ