Protect your gear from scratches, impact, and other damage with the black OConnor Molded Case. This sturdy case is specifically designed to carry the 1030/30L systems. Well-designed, the case has built-in handles and will stand upright for easier loading. This case has flat sides to prevent rolling when stored flat.

For 1030/30L Systems    Built-In Handles    Upright Standing for Easier Loading    Flat Sides to Prevent Rolling

Related Questions and Answers

Q: 1. Does the latest version of this case have a lock?

A: This does not have a lock

Q: 2. Will this fit the secced reach 4 kit, tripod and fluid head?

A: This case can fit a tripod with a fluid head which measures no more than 46" in total length.

Q: 3. hei, will a ricoh gr ii + gh-3 adapter (not the hood) fit into this? thanks!

A: Yes both the camera and the adapter will fit into this case.

Q: 4. Length

A: The Specifications tab states the exterior dimensions for the SKB Roto-Molded Tripod Case with Wheels (37 Tall) measures 12.5 x 40.25 x 11.0 .

Q: 5. Can this SKB Roto-Molded Tripod Case (24 Tall) be used as checked baggage on airlines?

A: Hi Lynette, Yes, you can check these at the airport although there are better solutions if you tend to fly with this gear a lot. These tripod cases have clips keeping the lid on so if the case gets hit in just the right way it could open the lid. If you were consistently checking these for fly dates then I would recommend our 3i-3613-12BE (empty), 3i-3613-12BL (with foam)or 3i-2213-12BE (empty), or 3i-2213-12BC (with foam). These options are made to take much more abuse from being shipped or checked on airlines. Also these options have pull out handle and wheels where the 1SKB-R2411 does not. If you purchase any of these cases empty or use the 1SKB-R2411 I would recommend putting the tripods and heads in sleeves or padded bags if flying. That will help so that the gear does not get scratched. Thank you,Will

Q: 6. Just to be clear - Will this dolly work with the OConnor Flowtech 100 ?

A: Yes, the OConnor flowtech 100 Tripod with Attachment Mount is compatible with the OConnor Dolly for flowtech Studio Tripods.

Q: 7. What Nodal Rail will fit the RTH-1030. Is Nodal Rail from Really Right Stuff MPR-CL 5.7 or the Acratech Nodal Rail an ok fit?

A: Yes, both the RRS and the Acratech will fit the Robus RTH-1030 Triple Action Ball Head. Both of those rails are arca compatible and will work with the Robus that is also arca. Main thing you want to look for is how long the lens you are using. You want a rail that is similar to the length of your lens and camera. If the rail is much longer it may appear in the photo if you are using a wider angle lens. If the rail is too small you might not be able to place the center of the lens over the center of the tripod.

Q: 8. I am interested in the SKB Roto-Molded Tripod Case (24 Tall). Would two tripods (each under 23 inches tall) and two ball heads not attached fit in this case?

A: Hi Lynette, It depends on the diameter of the tripod legs to judge if you have enough room for the two ball heads. If you have tripods for still cameras most likely they will fit as they tend to be smaller than tripods for video. Two tripods each under 23 inches should fit no problem unless the diameter of the legs closed is over 6 per tripod. To verify you could use a piece of gaffers tape and tape the the two tripods together and measure. Thank you,Will

Q: 9. What is the input/output impedance for this device?

A: The input inpedance is 1.6K? (-10dB), and the output is 660?(-10dB).

Q: 10. Will I be able to check this bag and not pay oversize fee at airport. Most airlines use L, W, H, total of 62 inches and under as not oversized. Also I have a 38 slider, will this fit in the case?

A: This design is an extremely annoying 1.5 beyond the oversize limit. I've checked it twice without being charged anything extra. But I'm just waiting for a stickler check-in agent to ruin my streak with a $200 oversize fee...