The Schneider 4x5.65" 4mm Clear True-Streak Filteris designed to be used perpendicular to a point light source such as the sun, a light bulb, or a candle. Within the filter's glass is a combination of fine line types whose action is limited to point light sources. Upon those light sources, those lines create the effect of a scene or image that has been recorded with an anamorphic lens and then displayed using a complementary reverse projection lens. This can result in prominent, elongated streaks that are symmetric and extend horizontally from each point light source for the purpose of drawing attention to a specific part of the frame, or to create a visually dramatic effect.

If an image or footage is captured with an anamorphic lens for the primary purpose of obtaining a greater aspect ratio than what is possible when only using spherical lenses on a 35mm format, the direct result will appear compressed and distorted. Projecting this compressed and distorted footage or imagery through a reverse anamorphic projection lens allows elements within the scene to be viewed in their correct proportions. A complementary effect of this process after it is completed is the creation of elongated, blue-colored, horizontally symmetrical highlights from point light sources that can extend through the frame.

Many cinematographers and photographers find this effect desirable and the Schneider 4 x 5.65" 4mm Clear True-Streak Filter is intended to allow such highlights to be easily reproduced when using optics that do not have an anamorphic design. This filter renders the streaks it helps to create with no color, instead of the blue highlights generated when using traditional anamorphic optics that are not designed to suppress streaking. Clear True-Streak Filters allow existing colors or lack of colors displayed by point light sources to be maintained, while True-Streak Filters that are formulated to create red, orange, yellow, green, blue, pink, or violet banding are also available.

The line types within this filter's glass are placed 4mm apart from each other. True-Streak Filters with spaces of 3mm, 2mm, or 1mm between their lines are also available where this filter type's effect becomes progressively stronger as the spacing between those lines is decreased.

This filter is most effective for pictures where the light source used to generate the streak effect is a highlight with a significant degree of contrast from the rest of the image. It is constructed from water white glass for clarity as well as color fidelity.

Streak Effect from Point Light Source    Anamorphic, Symmetric, Elongated Streaks    Horizontal Streaks from Light Source    Clear, Colorless Streaks    Water White Glass Construction    Padded Pouch

• Creates prominent, elongated streaks that are symmetric and extend horizontally from point light sources within a scene
• Draws attention to a specific part of the frame, or can create a visually dramatic effect
• Allows the effect of anamorphic optics upon highlights to be reproduced when using optics that do not have an anamorphic design
• Creates clear, colorless streaks
• Constructed from water white glass for optical clarity and color fidelity
• Padded pouch included for storage and transport

Related Questions and Answers

Q: 1. Are these archival? What are they made out of?

A: They are polypropylene and are acid free and archival.

Q: 2. Will this work with my Canon RF 70-200mm f/2.8 lens?

A: Yes, the Canon 70-200mm f2.8 RF mount lens uses any 77mm filter.

Q: 3. This says 4 x 5.6 as opposed to 4 x 5.65 Can you tell me the difference?Will these filters fit in my RedRock Micro okay?

A: The filters are 4x5.65 as we do not manufacture 4x5.6. This is just a mislabel by B&H.

Q: 4. does this lens work with Sony A7rii mirrorless?

A: Yes, it will work but this is for a cropped sensor camera (aps-c) so you will be using about 40% of the sensor on the A7r2 and reducing resolution by about 40%.

Q: 5. will this fit a Hasselblad lens?

A: This all depends on the lens that you purchased. If the front element of the lens is a 77mm, then this filter will work just fine, if not, you will nee to use either step-up or step-down rings accordingly.

Q: 6. Is this compatible with the canon version of Sigma lens?

A: The Haida Clear-Night Filter for Sigma 14-24mm f/2.8 DG DN Art Lens for Sony E is not compatible with the Sigma 14-24mm f/2.8 DG HSM Art Lens for Canon EF.

Q: 7. Will this lens work on Panasonic G9ii ?

A: Yes, the 7artisans Photoelectric 4mm f/2.8 Circular Fisheye Lens for Micro Four Thirds is compatible with the Panasonic G9ii. It is manual focus and manual exposure only.

Q: 8. What does the term Photoelectric mean?

A: The term Photoelectric on the 7artisans Photoelectric 4mm f/2.8 Circular Fisheye Lens for Micro Four Thirds just means it is a lens that was designed for digital. This is a purely mechanical lens, with mechanical aperture and focus control. This does not communicate with the camera.

Q: 9. What is the best enlarger lens to print 35mm negatives on a Beseler 4x5 enlarger?

A: A 50mm Schneider or Rodenstock lens would be most useful.

Q: 10. It mentions that the lens is compatible with Nikon Z30 Nikon Z50 and Nikon Zfc. How about the Z6?

A: Yes, the Venus optics laowa 4mm lens will adapt to all Nikon Z bodies.