The white, 40' Canare Star Quad 3-Pin XLR Male to 1/4 TRS Male Cable is handcrafted with superflexible Canare L-4E6S cable and features high-quality Neutrik XLR and TRS phone connectors. The Star Quad series has been engineered to dramatically reduce hum and electromagnetic interference (EMI) for outstanding signal transparency both in the studio and on stage. Designed to virtually eliminate handling noise, this cable is well-suited for connecting a balanced 1/4" TRS audio output, like those found on many mics and instruments, to a balanced XLR input on a mixer, PA speaker, or similar device.

Greatly Reduces Hum and EMI    Designed to Eliminate Handling Noise    21 AWG, Canare L-4E6S Cable    Neutrik Connectors

Special crosslinked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

21 AWG cable with copper conductors

Great for extended cable runs over 25'

Related Questions and Answers

Q: 1. What is the length of this cable?

A: The cable is 17" long. From end to end of the 3.5mm connector to the XLR connectors is 21".

Q: 2. Will this cable work to connect a RODE VideoMicro external microphone to a Fuji X-T20?

A: Yes, it's exactly what you need for that camera's 2.5mm port.

Q: 3. is it compatible with saramonic blink 500 pro?

A: Yes you can use the Saramonic SR-UM10-C35XLR with the Saramonic Blink 500 Pro receiver.

Q: 4. Why does this module have a power input? Can it be used by itself as a separate recorder?

A: The DC5V USB-C power input on the Zoom EXH-6e Dual XLR-1/4" TRS Input Capsule for H6essential Portable Recorder would be used for powering condenser microphones with an XLR connector, because these types of mics require 48V phantom power.

Q: 5. is it compatible with the zoom H6?

A: At this time, it is not compatible with the Zoom H6.

Q: 6. Will my H8 need a firmware update for full functionality with the EXH-8?

A: No firmware upgrade needed- EXH-8 is fully compatible/designed for H8.

Q: 7. Would this cable provide separate tracks out of the UwMic9, or will it be both channels mixed into both XLR’s?

A: Both channels would be mixed on both XLRs because all of the audio from both microphones is coming from a single output on the Saramonic RX9 receiver.

Q: 8. Which pins are the tip, ring, and sleeve wired to, respectively?

A: Unfortunately Saramonic has not made a wiring diagram for the SR-UM10-C35XLR available.

Q: 9. Would this cable work with a Rode Go II receiver?

A: Yes, the Saramonic SR-UM10-CC1 would be compatible with the Rode Wireless GO II receiver.

Q: 10. Does this cable work between a Panasonic GH4 and a Beachtek MCC-2 adapter? Thank you.

A: The GH4 will have a3.5mm mic input unlike the older Lumix cameras. The SC25 will not be necessary. The standard 3.5 jack will work, the SC35 which is available separately, but included with most Beachtek products including the MCC-2 a href= http://bhpho.to/1C8lNYP target= _blank http://bhpho.to/1C8lNYP/a