Afinia Abs Filament For 3D Printers (Silver, 1.75Mm)

Afinia Abs Filament For 3d Printers (silver, 1.75mm)

Product Code: eq173451
Availability: In Stock

$119.97 $177.56

Qty

10 reviews Write a review

Description
Reviews (10)

The 1.75mm silver Premium Natural ABS Filament for 3D Printers from Afinia is designed to the extruding specification of the H479 3D printer. The supports and raft break easily away from your model leaving a fine finish while keeping high dimensional tolerances.

For the H-Series 3D Printers

Parameters
Filament Diameter	1.75 mm
Filament Properties	No
Color	Silver
Compatibility	Afinia H-Series
Filament Length	1312.3' / 400 m
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.7 lb
Box Dimensions (LxWxH)	11.1 x 8.4 x 2.7"

Related Questions and Answers

Q: 1. Is this stand compatible with the Epson SureColor P700?

A: The Epson 24" Stand is compatible with Epson SureColor T2170, T3170, and T3170X wireless printers and has a catch basket.

Q: 2. Would this fit DNP-RX1 1st generation

A: Confirmed this works with DNP-RX1 1st gen. I use the 1st gen and have tried a new set already.

Q: 3. Hi, can we print 2 4x6 with the 8x6 paper?

A: I am not entirely sure as I only purchase the 4x6 size

Q: 4. how do u know or what are the difference between the Rx1 paper and the new Rx1Hs paper?

A: Gray cap on the end of the ribbons receiving roll is RX1HS. Yellow is RX1

Q: 5. After mount the paper and ribbons 4x6 can we change for paper and ribbons 8x6 before the paper finish or I have to wait to finish one size to change for the other size?

A: You absolutely can. Two VERY important things to keep in mind.1. Be sure the roll of paper maintains it's shape - be VERY careful when pulling the end caps off. If the roll is off my as much as 1/4 , the paper will jam and your ribbon will break.2. Change the ribbon at the same time - this is just for convenience - then you avoid the potential of haveing 2 changes during one event. You always get a ribbon with a roll of paper so it just makes sense to keep the roll with the paper.

Q: 6. Is this stand compatible with Epson F570?

A: Yes it is compatible with the F570.

Q: 7. Can this system be used with a Glowforge Basic unit?

A: As long as you can connect the exhaust hose to your printer it will work.

Q: 8. Hello guys, this printer comes with the tray for the photos?

A: If you order the printer yes it has a try that the strips fall into. If you order just the paper then no. Hope that helps

Q: 9. re: filter replacement every 6 months...is that using acrylic only? Wood such as mdf clogs glowforge filter like every 2 weeks. Does BHPhoto sell the filters? How much are they? Would you happen to know the decibels? I'd like to run this with my new Thunder Laser Nova 24 in an apartment. Thank you in advance. Could be looking to purchase this week.

A: We do carry the filters for this unit. That would be the Afinia Replacement Filter for F2000 Fume Filtration System, BH # AFFMFPLCTF2K. Afinia lists the unit as producing 55 dB. https://bhpho.to/35knicF

Q: 10. How tall is this stand? Either on it's own or with the T2170. The depth would also be helpful and the actual width but mostly I need the height.

A: The height of the Epson Surecolor T2170 24" Wireless Inkjet Printer with the stand is 36". Depth with the printer is 28".

Zachary	26/09/2024
[Afinia H-Series] This is hands down the best entry level scanner on the market the amount of detail it can capture is unreal. 5

Ben	11/08/2024
[Silver] Easy to find, easy to register, easy to order! Highly recommend!! 5

Kris	29/06/2024
[2.7 lb] Easy to get and fast shipping , Thanks! 5

Mark	28/05/2024
[Silver] I have made over 20 projects with this and am just now on my second spool. Even in draft mode this plastic looks great. 5

Vitaliy	24/05/2024
[Silver] it needs a bit of modification on the printer to work but it is easy. The material is strong but need heat to melt. 5

David	22/05/2024
[1.75 mm] Had some other brand ABS+ that was supposedly for high speed printers, but it was warping like mad. I bought this on a whim, and it worked perfectly first time. Have yet to have a failed print with it (knock on wood). 5

Brian	19/04/2024
[1.75 mm] No more wasted time & filament. I ordered the Lulzbot filament Runout sensor and installed it on the Lulzbot Taz 6. The install was fairly simple. I have the filament mounted on the top not the side, so I had to print a new adapter to attach it to the top of the frame. I wired it up, fired it up and it worked great. No more wasted filament or stressing if I was going to run out before the print is done! 5

Christopher	14/04/2024
[Afinia H-Series] Took very little time to learn how to use the scanner and software, amazing life like scans and color. 5

Francisco	08/04/2024
[1.75 mm] Excellent Filaments 5

Benjamin	30/11/-0001
[Afinia H-Series] There's still a bit of a learning curve, but the software and hardware for this is way better than the competitive offerings in this price range. This can be fiddly to say the least when trying to scan small objects, but I still found it easier than the Mole 3D scanner even for small things. For medium to large objects, this has been a joy to use. Some drawbacks: needs a connection to a power supply and constant connection to a fairly powerful PC with Nvidia GPU. Recommend 32GB or more of RAM. 5