The Yamaha HS8 Studio Monitor - High-Quality Soundfrom Yamaha HS8 Studio Monitor - High-Quality Soundis a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 120W of total output and features an 8-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS8 has both an XLR and 1/4" TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups.

120W Total Output    8" Cone Woofer    1" Dome Tweeter    Room Control Response Switch    High Trim    1x XLR Input    1x 1/4" TRS Input    Low Resonance Enclosure

HS Series cabinets are designed to eliminate unwanted resonance and increase the

accuracy of sound reproduction to their extreme limit. The enclosures are constructed from

a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of

a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to

attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed

next to walls, while HIGH TRIM allows for more flexible control of high frequency response.

For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

Related Questions and Answers

Q: 1. does it support audio?

A: Yes. The following unit offers audio for the following inputs Embedded Audio HDMI/SDI Audio Receiver: 1 x 1/8" / 3.5 mm Headphone Output

Q: 2. Is there a 4-pin lemo power adapter that is acceptable for plugging this into AC? (aside from using a dummy battery).

A: Currently there is no lemo power cable option from DJI. However, You could power the DJI High-Bright Remote Monitor when using the included NP-F Battery Adapter and using the following wall power supply. Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery BH #POACF550 • MFR #AC-F550 https://bhpho.to/3jbydiF

Q: 3. Can I buy this transmission combo that comes with 1 monitor and link with two other monitors? Like 3 monitors total?? I didn't explain myself well... my Idea is use 3 DJI monitors with one TX ANTENNA...

A: The DJI Wireless Video Transmitter (B&H# DJVDC) (which is one part of the DJI Transmission Combo (B&H# DJTRC) kit) can be used with that combo's included DJI High-Bright Remote Monitor (B&H# DJHBRM). Yes, you could in fact use three such DJI High-Bright Remote Monitors at once if you purchase two more separately: https://bhpho.to/39yBML7

Q: 4. So the CrystalSky eliminates the need for any smart phone/tablet?

A: Yes, the Crystal Sky is and Android powered device and replaces your smart device with a much brighter screen with more outputs.

Q: 5. So the CrystalSky eliminates any need for smartphone/tablet?

A: That is correct. It has its own operating system (Android) and has both DJI GO and DJI GO 4 installed.

Q: 6. Is there an adapter to use np-f batteries?

A: Currently the only battery supported on the DJI High-Bright Remote Monitor is the following battery option from DJI - https://bhpho.to/3IsHAT1

Q: 7. May I have full screen (no OSD) on second monitor connected thru HDMI output while having OSD on crystalsky screen at the same time?

A: The HDMI output will match the screen on your CrystalSky.

Q: 8. Can this be used like a regular monitor for any camera with HDMI out or does it only work for DJI products?

A: Cannot be used as a monitor since it only has a HDMI output and no input

Q: 9. What parts do I need to mount a nucleus m to this monitor on everything together on a standard Manfrotto light tripod?

A: You could use a combination of the Tilta ARRI-Standard Rosette Adapter for Nucleus-M FIZ Hand Unit(BH #TIWLCT03RC) with the CAMVATE ARRI M6 Rosette Adapter for 1/4"-20 Threads(BH #CAC2572), to mount the Tilta Nucleus-M FIZ Hand Unit to the cage of the High-Bright Remote RX Monitor in the DJI Transmission Combo.

Q: 10. Is the dji transmission combo replacing the dji force .

A: The DJI DJI Transmission Combo would be similar to the DJI Force controls for the latest gimbal models. DJI has not indicated that DJI Force is being replaced.