The Movcam Rosette Extension Arm 4" for Camera Mountingfrom Movcam Rosette Extension Arm 4" for Camera Mountingis a basic rosette extension designed for use with the Movcam Camera Cages and Shoulder Support Kits. It features a standard rosette connector on each end with easy grip rounded knobs and multiple 1/4"-20 female threads along the top, bottom, and sides of the arm.

Reposition Rosette Handles    1/4"-20 Threaded Sockets    Rounded Grip Knobs

Related Questions and Answers

Q: 1. Can I use this on a Tilta Cage for BMPCC6K Pro as an extention to attach a Tilta Side Handle Grip?

A: Yes, you can use the Tilta Rosette Extender Arm for DJI RS 2 on the Tilta Cage for BMPCC6K Pro.

Q: 2. Extension arm that can hold my camera

A: If you must you can use , Manfrotto 155 Double Ball Joint Head with Camera Platform B&H # MA155 , depending what camera you are using

Q: 3. What type of screws are used to attach the lens support on the riser? Need to know if I can use a screw with a looped end so I can add a handstrap to my cage.

A: Don't know the exact size without some research. It takes a 3mm hex key and is probably a metric size like the rest of the screws on the cage, only larger. Its tapped hole would not take a standard looped tripod screw since it's a bit smaller than a 1/4 tripod screw. The riser screw drops into a 1/4-20 tripod threaded hole.

Q: 4. Will this fit on an FS700?Are the rosettes on both ends Sony compatible?

A: No, unfortunately it will not. These rosettes are Arri style and will need an adapter to work with the FS700. Check out Wooden Camera FS700 extension arm.

Q: 5. What is the maximum load the arm can hold?

A: The 40" arm load is limited by how much the stand it is mounted on can hold. You will want to make sure the attachments, counterweight and arm weight less than the stands load limit.

Q: 6. If this is standard ARRI Rosette, can I use it with any support handle, like the Tilta Pro Handgrip?

A: Yes, the Tilta Professional Handgrip Side Arms (Pair), B&H # TITTH03, are compatible with the Tilta Rosette Extender Arm for DJI Gimbals. Because the Tilta Rosette Extender Arm for DJI Gimbals uses ARRI-style rosettes on each end, you can mount it to any other products that also use ARRI-style rosettes.

Q: 7. I have a sony battery grip on my a7s. Is there any way to configure this cage to somehow still fit on my a7s?

A: Sorry, not there is not a way to configure with a grip.

Q: 8. is the attached grip stationary and will this grip attach to a Manfrotto light stand for an overhead rig?

A: The grip head is fixed. In some cases and with other accessories you can use this for a overhead rig. You will want to make sure the particular stand has the load capacity for it.

Q: 9. What is the diameter size of the small rod? Standard 15mm? Is it threaded inside?

A: Yes the small rod on the LanParte EVF Extension Arm for Sony PXW-FS5 is a 15mm rod that is not threaded.

Q: 10. is there a flat side at the point where you'd attach a light strobe to it when you put it at an awkward angle?

A: No, the Avenger D520L 40" Extension Arm does not have a flat end; the rod on the extension arm is round.