Startech St121Utp Vga Extender Over Cat5 Black

Startech St121utp Vga Extender Over Cat5 Black

Product Code: eq173595
Availability: In Stock

$362.97 $446.45

Qty

15 reviews Write a review

Description
Reviews (15)

The black ST121UTP VGA Video Extender over Cat5 from StarTech allows you to extend your VGA video signal by up to 500’ (150m) and connect up to 4 displays (2 local and 2 remote) from that single source. The ST121UTP from the ST121 Series is a bundled kit including both a local transmitter and a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required.

The local unit features a single VGA input as well as 2 VGA outputs giving you the ability to view and split your source VGA signal to 2 independent displays locally. The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features 2 additional VGA outputs giving you the freedom to display your VGA source on up to 4 monitors in total.

The included mounting bracket provides versatile mounting options such as a wall, desk, or cabinet.

Hardware
Port	1
Cabling Type	Cat 5e UTP or better
Connectors
Connector 1	Local Unit Connectors: 1 x RJ-45 Female 1 x VGA (15 pin; high density D-Sub) Male 2 x VGA (15 pin; high density D-Sub) Female
Connector 2	Remote Unit Connectors: 1 x RJ-45 Female 2 x VGA (15 pin; high density D-Sub) Female
Performance
Maximum Distance	500' (150 m)
Supported Resolutions	1440 x 900 @ 150.00’ (45.72 m) 1280 x 1024 @ 300.00’ (91.44 m) 1024 x 768 @ 500’ (152.40 m)
Power
Output Voltage	9 VDC
Output Current	0.6 A
Center Tip Polarity	Positive
Physical Characteristics
Enclosure Type	Aluminum
Dimensions	2.40 x 3.30 x 0.80" (6.10 x 8.38 x 2.03 cm)
Weight	6.40 oz (181.44 g)
Packaging Info
Package Weight	2.05 lb
Box Dimensions (LxWxH)	9.6 x 7.4 x 3.7"

Consists of 1 Base unit for the local display, and 1 Remote unit for the remote display (up to 2 monitors can be connected at each location)

Extends video cables by up to 500' (150m)

Uses standard Category 5 straight-wired, twisted-pair, network patch cable for reliable data transmission

VGA extension through non-proprietary network cabling

Included mounting brackets for a tidy and professional installation

Free lifetime technical support

Related Questions and Answers

Q: 1. Will this enable my WD My Passport Pro Thunderbolt Ext Drive work with my new 2015 Macbook?

A: Yes, it will.

Q: 2. What do the dimensions mean — diameter X length or vice versa?

A: The given measurements in the description are the diameter and the height.

Q: 3. Will this allow the Seagate HDD//8TB to connect to my 2012 macbook pro?

A: This adapter is currently thunderbolt 3 to thunderbolt 2/1 connection only and is mainly used on PC to connect older thunderbolt hard drives. No macs currently support thunderbolt 3. I managed to create a 10Gb network connection between a PC and a Mac Pro using this adapter.

Q: 4. I have Mac with Thunderbolt 3 need to connect to thunderbolt2 Harddisk. is this compatible?

A: I bought two of this Startech adapter. Both are attached to a PC with dual Thunderbolt 3 (USB-C) ports. One adapter is connected to Thunderbolt 2 device, and the other to a Thunderbolt 1 device. Both devices are recognized by Windows through the Thunderbolt interface and I/O works fine in both directions. No issues whatsoever.

Q: 5. Will this cover canon 28mmm & 40mm lens?

A: I use it for my Canon 40mm pancake and it fits perfectly? I'm buying another one now for my 24mm...

Q: 6. Can it work with AkiTio Thunder 2 to provide eGPU support for new DELL XPS 15 that supports TB3?

A: I have a Akitio Thunder 2 Quad and it works great on my Asus laptop (ux501vw). Totally transparent.

Q: 7. Will this work on my, Olympus Fisheye Tough Lens Pack ?

A: Yes, it is large enough. The case can approximately support a lens that is 2.6-3 inches by 1-2 inches.And the lens is about 2.56 inches x 1.42 inches.

Q: 8. I'm looking at a Display that has USB C connectivity, This display can handle video and data through it when connected to a 1 port USB type C Macbook. Would I be able to get display and data from the USB C port to a thunderbolt 2 equipped Macbook with this adapter?

A: As the current MacBook does not support Thunderbolt, you would not be able to use a USB C to Thunderbolt adapter such as the StarTech Thunderbolt 3 to Thunderbolt Adapter to add that ability.

Q: 9. can i use it to connect my antalope orion+ (thunderbolt) to usb c port on my asus motherboard?

A: This would fully depend on the Asus Motherboard. Note that not all USB-C ports support Thunderbolt 3. If yours does, this StarTech Thunderbolt 3 to Thunderbolt Adapter will be compatible.

Q: 10. Thunderbolt startech with apple

A: Yes, this will work with Apple devices

N!N0 C.	02/09/2024
[9 VDC] My computer monitor does not support dvi got this hook up to my gpu dvi and connected my vga to it and it done the job it needed to do 5

msmac	17/08/2024
[Positive] The Display Port was very easy to install and the connection works like a charm! 5

Speedracer	29/07/2024
[Positive] Great product - multitask unit. 5

Paul R	11/07/2024
[2.05 lb] Received in just 2 days. Decent price, well-made, and working just fine. 5

nivek	04/07/2024
[Aluminum] I used this item to attach my Camera DVR to my TV. NO power supplies needed is a big plus and I ran about 75ft of Cat6. It works perfectly. 5

Alan	04/07/2024
[Aluminum] Not much else to say about these but the fact that they work. You could spend more and get the Geffens, but those are virtually identical to these. 5

Ryan S.	01/07/2024
[Positive] Does what it says. Works fine with no problems. If you need it, buy it! 5

Owain	24/06/2024
[Aluminum] Used two of these on a Dell 7010 i5-3470 with the built-in Intel 2500 graphics, together with the built-in VGA port, to run THREE VGA monitors simultaneously under Windows 10 . Need to disable the Dell driver and then get the driver from Intel as Dell disable 3-screen functionality. I was a little sceptical at first whether these would do the job, as many 'active' adapters are a lot more expensive. An added bonis is that these don't need a separate USB port for power. 5

Christopher J	24/06/2024
[9 VDC] I bought {much} cheaper ones' and they failed to work. This one worked first time, every time, no issues. Gets my vote as does B&H for carrying it. 5

Faithbuilder	06/06/2024
[500' (150 m)] Best ever remote hookup for a projector. Run a CAT5 cable from the computer in the back to the projector in the front- instant video. This was a replacement for one purchased 6 years ago, which began distorting colors. New set fixed it right up. 5